Abicor Binzel MF1-Rear Bedienungsanleitung

T E C H N O L O G Y F O R T H E W E L D E R ´ S W O R L D .

www.binzel-abicor.com

EN Operating instructions

MF1-Rear

EN Master feeder

EN - 2 BAL.0442.0 • 2021-10-21

MF1-Rear

EN English Translation of the original operating instructions

operation Instructions which may become necessary due to misprints, inaccuracies or improvements to the product. Such changes

will however be incorporated into subsequent editions of the Instructions. All trademarks mentioned in the operating instructions

are the property of their respective owners.

All brand names and trademarks that appear in this manual are the property of their respective owners/manufacturers.

Our latest product documents as well as all contact details for the ABICOR BINZEL national subsidiaries and partners

worldwide can be found on our website at www.binzel-abicor.com

1 Identification EN-3

1.1 Marking EN-3

2 Safety EN-3

2.1 Designated use EN-3

2.2 Obligations of the operator EN-3

2.3 Personal protective equipment (PPE) EN-3

2.4 Classification of the warnings EN-4

2.5 Warning and notice signs EN-4

2.6 Emergency information EN-4

3 Product description EN-5

3.1 Technical data EN-5

3.2 Abbreviations EN-5

3.3 Nameplate EN-6

3.4 Signs and symbols used EN-6

4 Scope of delivery EN-7

4.1 Transport EN-7

4.2 Storage EN-7

5 Functional description EN-7

6 Commissioning EN-8

6.1 Mounting the feed rollers EN-8

6.1.1 Mounting the pressure rollers EN-9

6.1.2 Mounting the driving rollers EN-10

6.2 Installing the MF1-Rear EN-10

6.3 Establishing connections EN-11

6.3.1 MF1 or MF1 & MF1-Rear EN-11

6.4 Feeding in the wire EN-12

6.5 Pin assignment EN-13

7 Operation EN-14

7.1 Control elements EN-14

8 Decommissioning EN-15

9 Maintenance and cleaning EN-15

9.1 Maintenance intervals EN-16

10 Troubleshooting EN-18

11 Disassembly EN-18

12 Disposal EN-19

12.1 Materials EN-19

12.2 Consumables EN-19

12.3 Packaging EN-19

MF1-Rear 1 Identification

BAL.0442.0 • 2021-10-21 EN - 3

1 Identification

The MF1-Rear is part of the MFS-V3 wire feeder system and is used in industry and the trade for the delivery of welding

wire or solder. The MF1-Rear is a 4-roll wire drive that is solely used as the rear drive for feeding the wire in push-push

mode. All other media (coolant, shielding gas, welding current) required for the joining process must be separately supplied.

These operating instructions only describe the MF1-Rear master feeder. The MF1-Rear must only be operated using

original ABICOR BINZEL spare parts.

1.1 Marking

This product fulfills the requirements that apply to the market to which it has been introduced. A corresponding marking has

been affixed to the product, if required.

2 Safety

The enclosed safety instructions must be observed.

2.1 Designated use

• The device described in these instructions may be used only for the purpose described in these instructions in the manner

described. In doing so, observe the operating, maintenance and servicing conditions.

• Any other use is considered improper.

• Unauthorized conversions or power increase modifications are not permitted.

2.2 Obligations of the operator

• Keep the operating instructions within easy reach at the device for reference and enclose the operating instructions

when handing over the product.

• Putting into operation, operating and maintenance work may only be carried out by qualified personnel. Qualified

personnel are persons who, based on their special training, knowledge, experience and due to their knowledge of the

relevant standards, are able to assess the tasks assigned to them and identify possible dangers

(in Germany see TRBS 1203).

• Keep other persons out of the work area.

• Please observe the accident prevention regulations of the country in question.

• Ensure good lighting of the work area and keep the work area clean.

• Occupational health and safety regulations of the country in question. For example, Germany: Protection Law and the

Company Safety Ordinance

• Regulations on occupational safety and accident prevention

2.3 Personal protective equipment (PPE)

To avoid danger to the user, these instructions recommend the use of personal protective equipment (PPE).

• This consists of protective clothing, safety goggles, a class P3 respiratory mask, protective gloves, and safety shoes.

EN - 4 BAL.0442.0 • 2021-10-21

2 Safety MF1-Rear

2.4 Classification of the warnings

The warnings used in the operating instructions are divided into four different categories and appear prior to potentially

dangerous work steps. Arranged in descending order of importance, they have the following meanings:

2.5 Warning and notice signs

The following warning and notice signs can be found on the product:

These markings must always be legible. They may not be covered, obscured, painted over or removed.

2.6 Emergency information

In the event of an emergency, immediately disconnect the following supplies:

• Electrical power supply

Further measures can be found in the operating instructions for the power source or the documentation of further peripheral

devices.

DANGER

Describes an imminent threatening danger. If not avoided, this will result in fatal or extremely critical injuries.

WARNING

Describes a potentially dangerous situation. If not avoided, this may result in serious injuries.

CAUTION

Describes a potentially harmful situation. If not avoided, this may result in slight or minor injuries.

NOTICE

Describes the risk of impairing work results or potential material damage to the equipment.

Symbol Meaning

Crushing of fingers!

MF1-Rear 3 Product description

BAL.0442.0 • 2021-10-21 EN - 5

3 Product description

3.1 Technical data

3.2 Abbreviations

WARNING

Hazards caused by improper use

If improperly used, the device can present risks to persons, animals and material property.

• Use the device according to its designated use only.

• Do not convert or modify the device to enhance its performance without authorization.

• The device may only be used by qualified personnel (in Germany, see TRBS 1203).

Ambient temperature -10°C to +40°C

Relative humidity Up to 90% at 20°C

Tab. 1 Ambient conditions during operation

Storage in a closed environment, ambient temperature -10°C to +40°C

Ambient temperature for shipment -25°C to +55°C

Relative humidity Up to 90% at 20°C

Tab. 2 Ambient conditions for transport and storage

MF1-Rear

Supply voltage 24 VDC

Standard roll diameter 20 mm

Drive 4 rollers

Protection rating IP 23

Weight 2.9 kg

Tab. 3 MF1-Rear

MFS-V3 Complete wire feeder system comprising an eBOX, MF1-Rear and a process-side drive plus all

necessary media leads and control leads

MF1-Rear Rear wire drive on push-push systems

MF1 Process-side wire drive

Quickconnector Interface for wire guidance

Tab. 4 Abbreviations

EN - 6 BAL.0442.0 • 2021-10-21

3 Product description MF1-Rear

3.3 Nameplate

The MF1-Rear is labelled with a nameplate as follows:

When making enquiries, please note the following information:

• Device type

• Device number (1)

3.4 Signs and symbols used

The following signs and symbols are used in the operating instructions:

1Device number 2Reduction ratio

Fig. 1 Nameplate

Standard reduction ratio

Laser applications i= 30:1

Tab. 5 Marking

XXXXXXXX

I = XXXX

Symbol Description

• Bullet symbol for instructions and lists

Cross-reference symbol refers to detailed, supplementary or further information

1Step(s) described in the text to be carried out in succession

MF1-Rear 4 Scope of delivery

BAL.0442.0 • 2021-10-21 EN - 7

4 Scope of delivery

Order the equipment parts and wear parts separately.

The order data and ID numbers for the equipment parts and wear parts can be found in the current product catalog. Contact

details for support and placing orders can be found online at www.binzel-abicor.com.

4.1 Transport

Although the items delivered are carefully checked and packaged, it is not possible to fully exclude the risk of damage during

transport.

4.2 Storage

Physical storage conditions in a closed environment:

Tab. 2 Ambient conditions for transport and storage on page EN-5

5 Functional description

The MF1-Rear is mechanically and electronically aligned with the master feeder system in push-push mode.

The 4-roll wire drive feeds the wire synchronously with the front drive MF1 in line with the target value setting.

•Assembly MF1-Rear • Operating instructions

Tab. 6 Scope of delivery

• Insulating plate (only with hot wire applications)

Tab. 7 Options

Goods-in inspection Use the delivery note to check that everything has been delivered.

Check the delivery for damage (visual inspection).

In case of complaints If the delivery has been damaged during transport, contact the last carrier immediately.

Retain the packaging for potential inspection by the carrier.

Packaging for

returns

Where possible, use the original packaging and the original packaging material. If you have

any questions concerning the packaging and/or how to secure an item during shipment,

please consult your supplier.

Tab. 8 Transport

EN - 8 BAL.0442.0 • 2021-10-21

6 Commissioning MF1-Rear

6 Commissioning

6.1 Mounting the feed rollers

DANGER

Risk of injury due to unexpected start-up

The following instructions must be followed during all maintenance, servicing, assembly, disassembly, and repair work:

• Switch off the power source.

• Close off the gas supply.

• Disconnect all electrical connections.

WARNING

Risk of crushing

Hands can be drawn in and crushed.

• Do not reach into moving wheels.

NOTICE

• Please take note of the following instructions:

3 Product description on page EN-5

• The system may be installed and commissioned only by qualified personnel (in Germany, see TRBS 1203).

NOTICE

• Ensure that the feed rollers (4), (12) are correctly installed.

• Always replace or reverse the feed rollers (4), (12) in pairs.

• Before installing the feed rollers (4), (12) remove any oil and grease residues from the running surfaces.

• Pay attention to the groove geometry and wire diameter; use smooth feed rollers only as pressure rollers (12).

• All grooved feed rollers (4), (12) have two guide grooves. Should one be worn out, the roll can be reversed once and

re-used.

• Adjust the contact pressure using the pressure screw (8).

• When assembling the pressure rocker (10) make sure that the axles (9) (anti-twist protection pin) are positioned in the

lower longitudinal groove.

• Check that the pressure rollers (12) run smoothly once installed.

• Ensure that the knurled screws are correctly assigned/installed in the correct position:

• Red knurled screws (7) = pressure rocker

• Blue knurled screws (3) = gear side

MF1-Rear 6 Commissioning

BAL.0442.0 • 2021-10-21 EN - 9

6.1.1 Mounting the pressure rollers

1Lift off the cover (5).

2Press on the rocker (10) then rotate the eccentric bolt (1) and remove it upwards.

3Unscrew the knurled screw (6) and lift off the rocker (10).

4Loosen the knurled screws (7) and press out the axle (9) downward.

5Remove the drive gears (11).

6Place the feed rollers (12) on the drive gears (11).

7Insert the drive gears (11) and axles (9) and secure in place using knurled screws (7).

8Place the rocker (10) on the bolt and secure with the knurled screw (6).

9Swivel the rocker (10) into position, insert the eccentric bolt (1) and turn it over.

10 Put on the cover (5).

1Eccentric bolt

2Drive gears (2 pcs.)

3Knurled screws (2 pcs.)

4Feeder drive rollers (2 pcs.)

5Cover

6Knurled screw

7Knurled screws (2 pcs.)

8Pressure screw

9Axles (2 pcs.)

10 Rocker

11 Drive gears (2 pcs.)

12 Feeder pressure rollers (2 pcs.)

Fig. 2 Mounting the feed rollers

1 2 43

10 7

EN - 10 BAL.0442.0 • 2021-10-21

6 Commissioning MF1-Rear

6.1.2 Mounting the driving rollers

1Unscrew and remove the knurled screws (3).

2Place the drive rollers (4) on guide pins on the drive gears (2) and secure with knurled screws (3).

6.2 Installing the MF1-Rear

Due to the different installation situations in systems, the system constructor/operator is responsible for ensuring that the

MF1-Rear is duly installed. Mount the MF1-Rear on a mounting plate of a suitable size.

NOTICE

• Red drive rollers = V-groove / blue drive rollers = U-groove

DANGER

Electric shock

Dangerous voltage during hot wire applications.

• All MF drives must be installed so as to be electrically insulated from other peripheral devices.

• Use insulating sleeves to fasten the screws on the robot.

NOTICE

• Ensure clear access to the control elements and connections.

• Select a location that allows a short and rectilinear wire feed.

• The dimensions of the following mounting holes are identical for the MF1 and MF1-Rear.

Fig. 3 Mounting hole dimensions in mm

36,40

43,90

Andere Handbücher für MF1-Rear

Inhaltsverzeichnis

Andere Abicor Binzel Schweißzubehör Handbücher

Abicor Binzel

Abicor Binzel AUT 61GD Bedienungsanleitung

Abicor Binzel

Abicor Binzel ALPHA Series Bedienungsanleitung

Abicor Binzel

Abicor Binzel SR/ABITIG 9 Bedienungsanleitung

Abicor Binzel

Abicor Binzel ABIMIG A Bedienungsanleitung

Abicor Binzel

Abicor Binzel MasterLiner Basic Flex/HD Bedienungsanleitung

Abicor Binzel

Abicor Binzel ABIPLAS WELD 250 MT Bedienungsanleitung

Abicor Binzel

Abicor Binzel ABITIG GRIP 1502 Bedienungsanleitung

Abicor Binzel

Abicor Binzel ALPHA Series Bedienungsanleitung

Abicor Binzel

Abicor Binzel iROB Trolley 1 MIG Handbuch

Abicor Binzel

Abicor Binzel MFS-V3 M-Drive Bedienungsanleitung

Abicor Binzel

Abicor Binzel ABIMIG WT Series Bedienungsanleitung

Abicor Binzel

Abicor Binzel xFUME PRO Bedienungsanleitung

Abicor Binzel

Abicor Binzel CR1000 Bedienungsanleitung

Abicor Binzel

Abicor Binzel WH Bedienungsanleitung

Abicor Binzel

Abicor Binzel G3000 Bedienungsanleitung

Abicor Binzel

Abicor Binzel Abirob W600 Handbuch

Abicor Binzel

Abicor Binzel MB EVO PRO Bedienungsanleitung

Abicor Binzel

Abicor Binzel ABIMIG WT Bedienungsanleitung

Abicor Binzel

Abicor Binzel ABIROB W50 Handbuch

Abicor Binzel

Abicor Binzel RTM ABIx EasyTeach Bedienungsanleitung

Abicor Binzel

Abicor Binzel ROBO Compact W500 Bedienungsanleitung

Abicor Binzel

Abicor Binzel iRob P400 Bedienungsanleitung

Abicor Binzel

Abicor Binzel ADF735S Bedienungsanleitung

Abicor Binzel

Abicor Binzel ABIROB W 350GC Bedienungsanleitung

Beliebte Schweißzubehör Handbücher anderer Marken

Lincoln Electric

Lincoln Electric LT-7 Tractor Bedienungsanleitung

Weco

Weco Trolley R Bedienungsanleitung

Cornwell Tools

Cornwell Tools MMWC1 Bedienungsanleitung

Dohle

Dohle ExOn2A Bedienungsanleitung

Nederman

Nederman Fume Eliminator FE 840/2500/P150 Bedienungsanleitung

3M Speedglas 9100 Series Bedienungsanleitung

Miller Electric

Miller Electric OM-842 Bedienungsanleitung

Miller

Miller A-200 Series Bedienungsanleitung

optrel

optrel lifeflip autopilot Bedienungsanleitung

Miller

Miller MIGmatic M-25 Bedienungsanleitung

Tregaskiss

Tregaskiss TOUGH GUN TT3 Reamer Bedienungsanleitung

Sealey

Sealey SR20.V2 Bedienungsanleitung

iWeld

iWeld NORED EYE Bedienungsanleitung

Sthor

Sthor 74483 Bedienungsanleitung

Leister

Leister TWINNY T7 Bedienungsanleitung

Miller

Miller I-22 CE Bedienungsanleitung

LAHTI PRO

LAHTI PRO L1540400 Bedienungsanleitung

Lincoln Electric

Lincoln Electric K3091-1 Bedienungsanleitung