Acer Altos G710 Bedienungsanleitung

Acer Altos G710

User’s Guide

Changes may be made periodically to the information in this publication without obligation

to notify any person of such revision or changes. Such changes will be incorporated in new

editions of this manual or supplementary documents and publications. This company makes

no representations or warranties, either expressed or implied, with respect to the contents

hereof and specifically disclaims the implied warranties of merchantability or fitness for a

particular purpose.

Record the model number, serial number, purchase date, and place of purchase information in

the space provided below. The serial number and model number are recorded on the label

affixed to your computer. All correspondence concerning your unit should include the serial

number, model number, and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronic, mechanical, photocopy, recording, or otherwise,

without the prior written permission of Acer Incorporated.

Model Number : _________________________________

Serial Number: ___________________________________

Purchase Date: ___________________________________

Place of Purchase: ________________________________

Acer Altos G710

User’s Guide

Acer and the Acer logo are registered trademarks of Acer Inc. Other company’s product

names or trademarks are used herein for identification purposes only and belong to their

respective companies.

iii

Notices

FCC notice

Class A devices do not have an FCC logo or FCC IDE on the label. Class B devices

have an FCC logo or FCC IDE on the label. Once the class of the device is

determined, refer to the following corresponding statement.

Class A equipment

This device has been tested and found to comply with the limits for a Class A

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy, and if not installed

and used in accordance with the instructions, may cause harmful interference to

radio communications. Operation of this equipment in a residential area is

likely to cause harmful interference, in which case the user will be required to

correct the interference at personal expense.

Class B equipment

This device has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This device generates, uses, and can radiate radio frequency

energy, and if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio or television

reception, which can be determined by turning the device off and on, the user

is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the device and receiver

• Connect the device into an outlet on a circuit different from that to which

the receiver is connected

• Consult the dealer or an experienced radio/television technician for help

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables

to maintain compliance with FCC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to

comply with the Class A or Class B limits may be attached to this equipment.

Operation with noncertified peripherals is likely to result in interference to

radio and TV reception.

Caution! Changes or modifications not expressly approved by

the manufacturer could void the user’s authority, which is granted

by the Federal Communications Commission, to operate this

server.

Use conditions

This part complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including interference

that may cause undesired operation.

Notice: Canadian users

This Class A/Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Laser compliance statement

The CD-ROM drive in this server is a laser product. The CD-ROM drive’s

classification label (shown below) is located on the drive.

CLASS 1 LASER PRODUCT

CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO

BEAM.

Important safety instructions

Read these instructions carefully. Save these instructions for future reference.

1 Follow all warnings and instructions marked on the product.

2 Unplug this product from the wall outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

3 Do not use this product near water.

4 Do not place this product on an unstable cart, stand, or table. The product

may fall, causing serious damage to the product.

5 Slots and openings on the back or bottom side of the chassis are provided

for ventilation; to ensure reliable operation of the product and to protect

it from overheating, these openings must not be blocked or covered. The

openings should never be blocked by placing the product on a bed, sofa,

rug, or other similar surface. This product should never be placed near or

over a radiator or heat register, or in a built-in installation unless proper

ventilation is provided.

6 This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult

your dealer or local power company.

7 Do not allow anything to rest on the power cord. Do not locate this

product where persons will walk on the cord.

8 If an extension cord is used with this product, make sure that the total

ampere rating of the equipment plugged into the extension cord does not

exceed the extension cord ampere rating. Also, make sure that the total

rating of all products plugged into the wall outlet does not exceed the fuse

rating.

9 Never push objects of any kind into this product through chassis slots as

they may touch dangerous voltage points or short out parts that could

result in a fire or electric shock. Never spill liquid of any kind on the

product.

10 Do not attempt to service this product yourself, as opening or removing

covers may expose you to dangerous voltage points or other risks. Refer all

servicing to qualified service personnel.

11 Unplug this product from the wall outlet and refer servicing to qualified

service personnel under the following conditions:

a When the power cord or plug is damaged or frayed

b If liquid has been spilled on the product

c If the product has been exposed to rain or water

d If the product does not operate normally when the operating

instructions are followed. Adjust only those controls that are covered

by the operating instructions since improper adjustment of other

controls may result in damage and will often require extensive work

by a qualified technician to restore the product to normal condition.

e If the product has been dropped or the cabinet has been damaged

f If the product exhibits a distinct change in performance, indicating a

need for service.

12 Replace the battery with the same type as the product's battery we

recommend. Use of another battery may present a risk of fire or explosion.

Refer battery replacement to a qualified service technician.

13 Warning! Batteries may explode if not handled properly. Do not

disassemble or dispose of them in fire. Keep them away from children and

dispose of used batteries promptly.

14 Use only the proper type of power supply cord set (provided in your

accessories box) for this unit. It should be a detachable type: UL listed/CSA

certified, type SPT-2, rated 7A 125V minimum, VDE approved or its

equivalent. Maximum length is 15 feet (4.6 meters).

Contents

Notices iii

FCC notice iii

Laser compliance statement iv

Important safety instructions v

1 System tour 1

Features summary 3

External and internal structure 7

Front bezel 7

Front panel 8

Rear panel 13

Internal components 16

System boards 17

Mainboard layout 17

Jumper settings 21

Backplane layout 22

SAF-TE board layout 24

2 System setup 25

Setting up the system 27

Preinstallation requirements 27

Connecting peripherals 28

Turning on the system 29

Power-on problems 31

Configuring the system OS 32

Server setup 33

Turning off the system 34

3 System upgrade 37

Installation precautions 39

ESD precautions 39

Preinstallation instructions 39

Post-installation instructions 40

Opening the server 41

Opening the bezel door 41

Removing the bezel door 41

Removing the bezel 42

Removing the left-side panel 43

Removing the air baffle 43

Configuring the four-bay hot-plug HDD cage 45

Installing the four-bay hot-plug SCSI HDD cage 45

viii

Installing the four-bay hot-plug SATA HDD cage 47

Installing a hard disk into the four-bay hot-plug

HDD cage carrier 49

Replacing storage devices 51

Replacing the FDD 51

Replacing the CD-ROM drive 53

Upgrading the CPU 56

Installing the heatsink and CPU 56

Removing the heatsink and CPU 58

Upgrading the system memory 60

Removing a DIMM 63

Installing a DIMM 65

Installing the Altos RAID-enabler (optional) 67

Installing an expansion card 69

Installing a power supply module 71

Replacing the easy-swap system fan 74

Removing an easy-swap system fan 74

Installing an easy-swap system fan 75

Installing an ePanel module (optional) 76

4 BIOS setup 79

BIOS setup 81

Entering BIOS setup 82

Main 84

System Information 86

Product Information 89

Advanced 90

Peripheral Configuration 91

IDE Configuration 93

Floppy Configuration 97

PCI/PnP Configuration 98

Boot Settings Configuration 99

Onboard Devices Configuration 102

Server Management Configuration 103

Remote Access Configuration 106

Power 109

Boot 111

Boot Device Priority 111

Hard Disk Drives 113

Removable Devices 114

ATAPI CD-ROM Devices 115

Security 116

To set a Supervisor/User password 117

To change the Supervisor/User password 117

To remove the User password 118

Exit 119

5 Troubleshooting 121

Resetting the system 123

Problems following initial system installation 124

First steps checklist 125

Hardware diagnostic testing 126

Verifying proper operation of key system lights 126

Confirming loading of the OS 127

Specific problems and corrective actions 127

Appendix A: System management 133

ASM 136

System requirements 136

System setup 137

ePanel 139

RAID configuration 140

Appendix B: Acer Altos G710

rack installation guide 141

Setting up the system rack 143

System rack installation 145

Vertical mounting hole pattern 146

Installing the system into the rack 148

Appendix C: SCSI RAID configuration 157

Configuring the SCSI/SCSI RAID HBA 159

Using the SCSI HBA setup utility 159

Using the SCSI RAID HBA setup utility 159

Using the MegaRAID configuration utility 160

Appendix D: ePanel 163

Overview 165

Installing ePanel 166

ePanel module 176

ePanel main menu 178

Info 178

Monitor 179

Network 182

Setting 183

Index 187

Andere Handbücher für Altos G710

Inhaltsverzeichnis

Andere Acer Server Handbücher

Acer

Acer AC100 Bedienungsanleitung

Acer

Acer AR385 F1 Bedienungsanleitung

Acer

Acer AT350 F1 Series Bedienungsanleitung

Acer

Acer Ferrari 1100 Series Bedienungsanleitung

Acer

Acer Altos R700 Series Bedienungsanleitung

Acer

Acer Altos R720 Series Bedienungsanleitung

Acer

Acer ALTOS R910 Series Bedienungsanleitung

Acer

Acer Altos 19000PRO4 Stücklistenhandbuch

Acer

Acer Altos S700 Series Bedienungsanleitung

Acer

Acer AT310 F2 Bedienungsanleitung

Acer

Acer Altos 11000 System Bedienungsanleitung

Acer

Acer Altos R5250 Series Bedienungsanleitung

Acer

Acer Altos T350 F4 Bedienungsanleitung

Acer

Acer AT350 F2 Series Bedienungsanleitung

Acer

Acer Altos R520 M2 Bedienungsanleitung

Acer

Acer Altos G700 series Bedienungsanleitung

Acer

Acer Network Device Altos R520 Bedienungsanleitung

Acer

Acer R5250-Q2000 - Altos - 2 GB RAM Bedienungsanleitung

Acer

Acer AcerAltos 21000 Stücklistenhandbuch

Acer

Acer AT350 F2 Series Bedienungsanleitung

Acer

Acer AT110 F2 Bedienungsanleitung

Acer

Acer AT310 F2 Bedienungsanleitung

Acer

Acer Altos G310 MK2 Series Bedienungsanleitung

Acer

Acer AR360 F1 Series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung