Acer Altos R710 Bedienungsanleitung

Acer Altos R710

User’s Guide

Changes may be made periodically to the information in this publication without obligation

to notify any person of such revision or changes. Such changes will be incorporated in new

editions of this manual or supplementary documents and publications. This company makes

no representations or warranties, either expressed or implied, with respect to the contents

herein and specifically disclaims the implied warranties of merchantability or fitness for a

particular purpose.

Record the model number, serial number, purchase date, and place of purchase information in

the space provided below. The serial number and model number are recorded on the label

affixed to your computer. All correspondence concerning your unit should include the serial

number, model number, and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in

any form or by any means, electronic, mechanical, photocopy, recording, or otherwise,

without the prior written permission of Acer Incorporated.

Model Number : _________________________________

Serial Number: ___________________________________

Purchase Date: ___________________________________

Place of Purchase: ________________________________

Acer Altos R710

User’s Guide

1st Issue: September 2004

Acer and the Acer logo are registered trademarks of Acer Inc. Other company’s product

names or trademarks are used herein for identification purposes only and belong to their

respective companies.

iii

Notices

FCC notice

Class A devices do not have an FCC logo or FCC IDE on the label. Class

B devices have an FCC logo or FCC IDE on the label. Once the class of

the device is determined, refer to the following corresponding

statement.

Class A equipment

This device has been tested and found to comply with the limits for a

Class A digital device pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial

environment. This device generates, uses, and can radiate radio

frequency energy, and if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

Operation of this device in a residential area is likely to cause harmful

interference in which case the user will be required to correct the

interference at his own expense.

However, there is no guarantee that interference will not occur in a

particular installation. If this device does cause harmful interference to

radio or television reception, which can be determined by turning the

device off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the device and receiver

• Connect the device into an outlet on a circuit different from that

to which the receiver is connected

• Consult the dealer or an experienced radio/television technician

for help

Shielded cables

All connections to other computing devices must be made using

shielded cables to maintain compliance with FCC regulations.

Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.)

certified to comply with the Class A or Class B limits may be attached to

this equipment. Operation with noncertified peripherals is likely to

result in interference to radio and TV reception.

Caution: Changes or modifications not expressly approved by the

manufacturer could void the user’s authority, which is granted by

the Federal Communications Commission, to operate this server.

Use conditions

This part complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Canadian users

This Class A/Class B digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

Laser compliance statement

The CD-ROM drive in this server is a laser product. The CD-ROM drive’s

classification label (shown below) is located on the drive.

CLASS 1 LASER PRODUCT

CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. AVOID

EXPOSURE TO BEAM.

Important safety instructions

Read these instructions carefully. Save these instructions for future

reference.

1 Follow all warnings and instructions marked on the product.

2 Unplug this product from the wall outlet before cleaning. Do not

use liquid cleaners or aerosol cleaners. Use a damp cloth for

cleaning.

3 Do not use this product near water.

4 Do not place this product on an unstable cart, stand, or table. The

product may fall, causing serious damage to the product.

5 Slots and openings on the back or bottom side of the chassis are

provided for ventilation; to ensure reliable operation of the

product and to protect it from overheating, these openings must

not be blocked or covered. The openings should never be blocked

by placing the product on a bed, sofa, rug, or other similar surface.

This product should never be placed near or over a radiator or

heat register, or in a built-in installation unless proper ventilation

is provided.

6 This product should be operated from the type of power indicated

on the marking label. If you are not sure of the type of power

available, consult your dealer or local power company.

7 Do not allow anything to rest on the power cord. Do not locate

this product where persons will walk on the cord.

8 If an extension cord is used with this product, make sure that the

total ampere rating of the equipment plugged into the extension

cord does not exceed the extension cord ampere rating. Also,

make sure that the total rating of all products plugged into the

wall outlet does not exceed the fuse rating.

9 Never push objects of any kind into this product through chassis

slots as they may touch dangerous voltage points or short out

parts that could result in a fire or electric shock. Never spill liquid

of any kind on the product.

10 Do not attempt to service this product yourself, as opening or

removing covers may expose you to dangerous voltage points or

other risks. Refer all servicing to qualified service personnel.

11 Unplug this product from the wall outlet and refer servicing to

qualified service personnel under the following conditions:

a When the power cord or plug is damaged or frayed

b If liquid has been spilled into the product

c If the product has been exposed to rain or water

d If the product does not operate normally when the operating

instructions are followed. Adjust only those controls that are

covered by the operating instructions since improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the product to normal condition.

e If the product has been dropped or the cabinet has been

damaged

f If the product exhibits a distinct change in performance,

indicating a need for service.

12 Replace the battery with the same type as the product's battery we

recommend. Use of another battery may present a risk of fire or

explosion. Refer battery replacement to a qualified service

technician.

13 Warning! Batteries may explode if not handled properly. Do not

disassemble or dispose of them in fire. Keep them away from

children and dispose of used batteries promptly.

14 Use only the proper type of power supply cord set (provided in

your accessories box) for this unit. It should be a detachable type:

UL listed/CSA certified, type SPT-2, rated 7A 125V minimum, VDE

approved or its equivalent. Maximum length is 15 feet (4.6

meters).

Notices iii

FCC notice iii

Class A equipment iii

Shielded cables iii

Peripheral devices iv

Use conditions iv

Canadian users iv

Laser compliance statement iv

Important safety instructions v

1 System information 1

Product briefing 3

Processor 3

Memory subsystem 3

Storage 4

Graphics interface 4

Networking 4

I/O ports 4

Caring features 6

Product specification summary 7

2 System tour 9

System board 11

Connector and Header Locations 11

Back Panel Connectors 13

SCSI Backplane 15

External and internal structure 16

Front view (with bezel) 16

Front view (w/o bezel) 16

Front panel 18

Front Panel LED and Buttons description 18

Control Button Functions 19

LED Indicator Status 19

Rear view 21

Optional Peripherals 22

Internal components 23

3 Getting Started 25

Setting up the system 27

Preinstallation requirements 27

Selecting a site 27

Checking the package contents 27

Contents

System startup 28

Turning on the system 28

Turning off the system 28

Power-on problems 29

4 Configuring the system 31

Upgrading the system 33

Installation precautions 34

ESD precautions 34

Preinstallation instructions 34

Post-installation instructions 35

Opening the server 36

Before opening the server 36

Removing the Chassis Cover 37

Installing the Chassis Cover 38

Removing and Installing the Processor Air Duct 39

Removing the Processor Air Duct 39

Installing the Processor Air Duct 39

Removing the Processor Air Dam (if required) 41

Removing the Processor Air Dam 41

Installing and removing a hard disc drive 42

Removing a hard disc 42

Installing a hard disc 43

Installing or Removing a Floppy, CD-ROM, or DVD-ROM

Drive 45

Install a Slimline Floppy Drive into Altos R710 45

Removing a Floppy Drive from the Slim Line Drive

bay with Altos R710 47

Installing a Floppy Drive into the Converted Hard

Drive Bay on Altos R710 Server System 48

Removing a Floppy Drive from the Converted Hard

Drive Bay 52

Installing the SCSI 6th HD upgrade kit in Altos R710 53

Installing a Tape Drive in Altos R710 55

Install a Slimline Optical drive into Altos R710 59

Removing a Slim line Optical Drive from Altos R710 61

Removing and Installing the PCI Riser Assembly 62

Removing the PCI Riser Assembly 62

Installing the PCI Riser Assembly 63

Replacing the PCI Riser Board 64

Installing a PCI Add-in Card 65

Replacing a System Fan 67

Connecting peripherals 67

Hard Disk Drives 68

Floppy / CD-ROM / DVD-ROM Slimline Cages 68

Rack-Mounted Systems 69

Configuration Jumpers 70

Hardware Requirements 71

Processor 71

Memory 72

Power Supply 75

Optional Hardware 76

Hard Disk Drives 76

Intelligent Management Module 76

Upgrading the CPU 77

Installing a CPU 77

Removing a CPU 79

Upgrading the system memory 80

To remove a DIMM 80

To install a DIMM 81

Reconfiguring the system memory 81

5 BIOS setup 83

Before You Begin 85

Tools and Supplies Needed 85

Installing and Removing Memory 85

RJ45 Serial Port Configuration 85

Replacing the Backup Battery 86

BIOS Setup Utility 89

Main 93

Advanced 95

Upgrading the BIOS 139

Preparing for the Upgrade 139

Recording the Current BIOS Settings 139

Obtaining the Upgrade 139

Upgrading the BIOS 140

Clearing the Password 141

Clearing the CMOS 142

6 Troubleshooting 143

Resetting the System 145

Problems following Initial System Installation 145

First Steps Checklist 145

Hardware Diagnostic Testing 147

Verifying Proper Operation of Key System Lights147

Confirming Loading of the Operating System 148

Specific Problems and Corrective Actions 148

Power Light Does Not Light 148

No Characters Appear on Screen 149

Characters Are Distorted or Incorrect 150

System Cooling Fans Do Not Rotate Properly 150

Diskette Drive Activity Light Does Not Light 150

CD-ROM Drive or DVD-ROM Drive Activity

Light Does Not Light 151

Cannot Connect to a Server 151

Problems with Network 151

System Boots when Installing PCI Card 152

Problems with Newly Installed Application

Software 152

Problems with Application Software that

Ran Correctly Earlier 153

Devices are not Recognized under Device

Manager (Windows* Operating System) 153

Hard Drive(s) are not recognized 154

Bootable CD-ROM Is Not Detected 154

BIOS POST Beep Codes 156

Appendix A: Management software installation

159

Installing ASM 161

System requirements 161

ASM Agent 161

ASM Console 161

System setup 161

Installing ASM Agent (Windows version) 162

Installing ASM Console (Windows version) 162

Installing ASM Agent (Linux version) 163

Appendix B: Tool-less rail kit installation 165

Tool-less rail kit installation 167

Setting the Multi-Pin Adapters for Rack Type 167

Installing the Slide Rails into the Rack 168

Installing the Component into the Slide Rails 170

Cable Management ARM installation 171

Required Installation Position of the CMA 172

Installing the CMA on the Slide Rails 173

Placing and Securing Cabling Within the CMA 174

Andere Handbücher für Altos R710

Inhaltsverzeichnis

Andere Acer Server Handbücher

Acer

Acer Altos 1200 Bedienungsanleitung

Acer

Acer AT310 F2 Bedienungsanleitung

Acer

Acer Altos R480 F4 Bedienungsanleitung

Acer

Acer Altos G710 Bedienungsanleitung

Acer

Acer AR385 F1 Bedienungsanleitung

Acer

Acer Altos R720 Series Bedienungsanleitung

Acer

Acer Altos easyStore M2 Bedienungsanleitung

Acer

Acer Altos R700 Series Bedienungsanleitung

Acer

Acer Altos G700 series Bedienungsanleitung

Acer

Acer HDS AMS200 Bedienungsanleitung

Acer

Acer Altos G710 Bedienungsanleitung

Acer

Acer AT310 F2 Bedienungsanleitung

Acer

Acer AR360 F1 Series Bedienungsanleitung

Acer

Acer Altos G300 Bedienungsanleitung

Acer

Acer Altos R310 Bedienungsanleitung

Acer

Acer Altos R700 Series Bedienungsanleitung

Acer

Acer ALTOS R910 Series Bedienungsanleitung

Acer

Acer R5250-Q2000 - Altos - 2 GB RAM Bedienungsanleitung

Acer

Acer AW2000h-AW175h F1 Bedienungsanleitung

Acer

Acer Altos G300 Bedienungsanleitung

Acer

Acer AR380 F1 Series Bedienungsanleitung

Acer

Acer Altos G520 series Bedienungsanleitung

Acer

Acer AT110 F2 Bedienungsanleitung

Acer

Acer AR320 F1 Series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung