Acer AT115 F1 Bedienungsanleitung

Gateway

GT115

Service Guide

PART NO.:

PRINTED IN TAIWAN

Preface

1. This Service Guide provides you with all technical information relating to the BASIC CONFIGURATION

decided for Gateway's "global" product offering. To better fit local market requirements and enhance

product competitiveness, your regional office MAY have decided to extend the functionality of a machine

(e.g. add-on card, modem, or extra memory capability). These LOCALIZED FEATURES will NOT be

covered in this generic service guide. In such cases, please contact your regional offices or the

responsible personnel/channel to provide you with further technical details.

2. Please note WHEN ORDERING FRU PARTS, that you should check the most up-to-date information

available on your regional web or channel. If, for whatever reason, a part number change is made, it will not

be noted in the printed Service Guide. For GATEWAY-AUTHORIZED SERVICE PROVIDERS, your

Gateway office may have a DIFFERENT part number code to those given in the FRU list of this printed

Service Guide. You MUST use the list provided by your regional Gateway office to order FRU parts for

repair and service of customer machines.

Revision History

Please refer to the table below for the updates made on Gateway GT115 service guide.

Date Chapter Updates

reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer

language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise,

without

the prior written permission of Gateway Incorporated.

Disclaimer

The information in this guide is subject to change without notice.

Gateway Incorporated makes no representations or warranties, either expressed or implied, with respect to

the contents hereof and specifically disclaims any warranties of merchantability or fitness for any particular

purpose. Any Gateway Incorporated software described in this manual is sold or licensed "as is". Should

the

programs prove defective following their purchase, the buyer (and not Gateway Incorporated, its distributor, or

its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential

damages resulting from any defect in the software.

Gateway is a registered trademark of Gateway

Corporation. Intel is a registered trademark of Intel

Corporation.

Pentium and Pentium II/III are trademarks of Intel Corporation.

Other brand and product names are trademarks and/or registered trademarks of their respective holders.

Conventions

The following conventions are used in this manual

Screen messages Denotes actual messages that appear

on screen.

NOTE Gives bits and pieces of additional

information related to the current

topic.

WARNING Alerts you to any damage that might

result from doing or not doing specific

actions.

CAUTION Gives precautionary measures to

avoid possible hardware or software

problems.

IMPORTANT Reminds you to do specific actions

relevant to the accomplishment of

procedures.

III

Safety, Care and Regulatory Information

Before installing a server, be sure that you understand the following warnings and cautions.

WARNING: To reduce the risk of electric shock or damage to the equipment:

Do not disable the power cord grounding plug. The grounding plug is an important safety feature.

Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.

Unplug the power cord from the power supply to disconnect power to the equipment.

Do not route the power cord where it can be walked on or pinched by items placed against it. Pay particular

attention to the plug, electrical outlet, and the point where the cord extends from the server.

WARNING:To reduce the risk of personal injury from hot surfaces, allow the drives and the internal

system components to cool before touching them.

CAUTION: Do not operate the server for long periods with the access panel open or removed.

Operating the server in this manner results in improper airflow and improper cooling that can lead to thermal

damage.

Preventing electrostatic discharge

To prevent damaging the system, be aware of the precautions you need to follow when setting up the system

or handling parts. A discharge of static electricity from a finger or other conductor may damage system boards

or other static-sensitive devices. This type of damage may reduce the life expectancy of the device. To

prevent electrostatic damage:

Avoid hand contact by transporting and storing products in static-safe containers.

Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.

Place parts on a grounded surface before removing them from their containers.

Avoid touching pins, leads, or circuitry.

Always be properly grounded when touching a static-sensitive component or assembly.

Server warnings and cautions

Before installing a server, be sure that you understand the following warnings and cautions.

WARNING: To reduce the risk of electric shock or damage to the equipment:

1. Do not disable the power cord grounding plug. The grounding plug is an important safety feature.

2. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.

3. Unplug the power cord from the power supply to disconnect power to the equipment.

4. Do not route the power cord where it can be walked on or pinched by items placed against it. Pay

particular attention to the plug, electrical outlet, and the point where the cord extends from the server.

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal

system components to cool before touching them.

CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating the

server in this manner results in improper airflow and improper cooling that can lead to thermal damage.

Table of Contents

PREFACE I

REVISION HISTORY I

DISCLAIMER I

CONVENTIONS II

SAFETY, CARE AND REGULATORY INFORMATION III

PREVENTING ELECTROSTATIC DISCHARGE III

SERVER WARNINGS AND CAUTIONS III

TABLE OF CONTENTS 1

MECHANICAL COMPONENTS 4

SYSTEM FRU LIST 6

SYSTEM COMPONENTS 9

SYSTEM SPECIFICATIONS 10

Hardware specification 10

Environmental specification 12

Mechanical specification 13

Power supply specification 14

APPEARANCE OF SYSTEM 16

Front view 16

Rear view 17

Internal Component 18

Switch and LED Indicators Introduction 19

Front Panel LED Description 19

Hard Disk Drive Sequence & LED Description 19

LAN Port LED Description 19

System Block Diagram 21

MOTHERBOARD PLACEMENT AND JUMPER SETTING 22

Motherboard Component 22

Connector Icon Description 23

Motherboard Jumper Setting 24

INSTALLING/REMOVING SYSTEM HARDWARE 25

Chassis Cover Removal and Installation 26

Removing the side cover 26

CPU Installation / Removal 27

Cooling Fan Installation / Removal 28

Memory Installation / Removal 29

PCI Expansion Card Installation / Removal 30

Install the expansion card 30

Hard Disk Drive Installation / Removal 31

Power supply installation / Removal 32

Install a hot-swap power supply module 32

CABLE ROUTING 33

Cable Routing image 33

BIOS SETUP 34

Main Menu 36

Advanced Menu 37

Processor Configuration 38

Memory Configuration 40

SATA Controller Configuration 41

PCI Configuration 42

USB Configuration 43

Legacy Device Configuration 44

Console Redirection 45

Power Configuration 47

Hardware Monitor 48

Security Menu 49

Setting a System Password 50

Changing a System Password 50

Removing a System Password 50

Server Menu 51

System Information 52

Event Log Configuration 53

Boot Option Menu 54

Boot Manager Menu 56

Exit Menu 57

TROUBLESHOOTING 58

Error Symptoms List 58

BIOS BEEP CODES 61

BIOS Beep Codes Table 61

PEI Beep Codes 61

DXE Beep Codes 61

BIOS Recovery Instruction 61

BIOS POST ERROR MESSAGES LIST 64

BIOS POST error message list 64

PEI Phase 64

DXE Phase 65

UNDETERMINED PROBLEMS 67

Mechanical Components

Item Description

1 Right side cover

2 System support retainer

3 System bottom plate

4 System support retainer

5 System plastic stands

6 Hard drive cage

7 Hard drive bracket

8 Front door plate

9 Front bezel

10 Power button

11 Bezel lens

12 Power lens

13 Optical drive cage

14 USB bracket

15 USB bracket

16 Left side cover

17 Hard drive slider

18 Hard drive cage

19 Top cover

20 System top cover

21 CD-ROM bracket patch

22 PCI retainer

23 Back cover

24 Rear window

System FRU List

Item Photo Part number

Chassis

HS.31600.004

SATA ODD CABLE 7 PINS,

500MM

CA.R4300.001

SATA HDD CABLE 7 PINS,

500MM

CA.R4300.002

SAS HDD CABLE

CA.31400.030

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Acer Server Handbücher

Acer

Acer AR385 F1 Bedienungsanleitung

Acer

Acer AB2x280 F1 Bedienungsanleitung

Acer

Acer Altos R310 Bedienungsanleitung

Acer

Acer AR320 F1 Series Bedienungsanleitung

Acer

Acer AT350 F1 Series Bedienungsanleitung

Acer

Acer AR360 F2 Bedienungsanleitung

Acer

Acer Altos R710 Bedienungsanleitung

Acer

Acer Altos R720 Series Bedienungsanleitung

Acer

Acer AR385 F1 Bedienungsanleitung

Acer

Acer AT350 F2 Series Bedienungsanleitung

Acer

Acer Altos R920 Series Bedienungsanleitung

Acer

Acer Altos G520 series Bedienungsanleitung

Acer

Acer ALTOS R910 Series Bedienungsanleitung

Acer

Acer Altos G320 Series Bedienungsanleitung

Acer

Acer AR320 Bedienungsanleitung

Acer

Acer R5250-Q2000 - Altos - 2 GB RAM Bedienungsanleitung

Acer

Acer Altos G5350 Bedienungsanleitung

Acer

Acer Altos R500 Bedienungsanleitung

Acer

Acer AT350 F1 Series Bedienungsanleitung

Acer

Acer Altos RM900 Bedienungsanleitung

Acer

Acer Altos G710 Bedienungsanleitung

Acer

Acer Network Device Altos R520 Bedienungsanleitung

Acer

Acer HDS WMS100 Bedienungsanleitung

Acer

Acer AB460 F1 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung