ACME RAYZOR HYBRID Bedienungsanleitung

CONTENTS

1. Safety Instructions ......................................................................................... 2

2. Technical Specifications ................................................................................. 4

3. Control Panel ................................................................................................. 6

4. Color Wheel/Gobo Wheels ............................................................................ 7

5. How To Set The Unit....................................................................................... 7

5.1 Main Function.......................................................................................... 7

5.2 Home Position Adjustment .................................................................... 14

6. Control By Universal DMX Controller ........................................................... 16

6.1 DMX512 Connection.............................................................................. 16

6.2 Address Setting ...................................................................................... 17

6.3 DMX512 Configuration........................................................................... 17

7. Troubleshooting........................................................................................... 25

8. Fixture Cleaning........................................................................................... 25

1. Safety Instructions

WARNING

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that

they also receive this instruction manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty. The dealer will

not accept liability for any resulting defects or problems.

Unpack and check carefully to ensure that there is no transportation damage before using the

unit.

This product is for indoor use only. Use only in a dry location.

DO install and operate by qualified operator.

DO NOT allow children to operate the fixture.

Use safety chain when fixing the unit. Handle the unit by carrying its base instead of head only.

The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surfaces.

Be sure that no ventilation slots is blocked, otherwise the unit will be overheated.

Before operation, ensure that you are connecting this product to the proper voltage in

accordance with the specifications in this manual or on the product’s specification label.

It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

Minimum ambient temperature TA: 0℃. Maximum ambient temperature TA: 40℃. Do not

operate this product at a lower or higher temperature.

DO NOT connect the device to any dimmer pack.

Keep flammable materials away from the fixture while operating to avoid fire hazard.

Make sure the power cord is not crimped or damaged; replace it immediately if damaged.

Avoid any flammable liquids, water or metal from entering the unit. Once it happens, cut off

the mains power immediately.

DO NOT operate in a dirty or dusty environment. DO clean the fixture regularly.

DO NOT touch any wire during operation as there might be a hazard of electric shock.

Please read the instruction carefully which includes important information about

the installation, usage and maintenance.

Avoid entanglement of the power cord with other wires.

The minimum distance to objects/surface must be more than 2 meters.

Disconnect mains power before fuse replacement or servicing.

Replace fuse only with the same type.

In the event of serious operating problem, stop using the unit immediately.

Never turn on and off the unit time after time.

The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

DO NOT open the housing as there are no user serviceable parts inside.

DO NOT attempt to operate this unit if it becomes damaged. DO NOT attempt any repairs

yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please

contact the nearest authorized technical assistance center if needed.

Disconnect this product from its power source before servicing.

DO use the original packaging if the device is to be transported.

Avoid direct eye exposure to the light source while the product is on.

DO NOT operate this product if you see damage on the housing, shields, or cables. Have the

damaged parts replaced by an authorized technician at once.

Installation:

The fixture should be fixed on the clamp. Always ensure that the unit is firmly fixed to avoid

vibration and slipping off during operation. Ensure that the trussing or area of installation must be

able to hold 10 times the weight without any deformation. Always install a safety cable that can

hold at least 12 times the weight of the fixture when installing.

DO install and operate by qualified operator. It must be installed in a place where there is out of the

reach of people.

2. Technical Specifications

Power Voltage:

100-240V~, 50/60Hz

Power Consumption:

190W

Light Source:

PU55-90FWL

Angle:

Beam Angle: 2°/4°/6°/8°/10°

3°/6°/9°/12°/15°/19°(with zoom lens)

Spot Angle: Static Gobo: 10°15°(with zoom lens)

Rotating Gobo: 10°17°(with zoom lens)

Wash Angle: 15°28°

Movement:

Pan: 540°

Tilt: 270°

Pan/Tilt Resolution: 16 bit

Dimmer/Shutter:

Smooth dimming from 0-100%; outstanding strobe effect with variable speed

Color Wheel:

1 x color wheel with 8 fixed colors plus white with rainbow effect

Gobo Wheel:

1 x static gobo wheel with 7 gobos plus open

1 x rotating gobo wheel with 6 gobos plus open

Control:

DMX Channel: 17/20 Channels

Protocols: DMX, RDM, Primary/Secondary, Sound Active

Firmware Upgrade via DMX link

Construction:

Display: LCD display

Data In/Out: 3-pin & 5-pin XLR

Power in/out: Power Connector in/out

Protection Rating: IP20

Features:

Motorized focus

1 x prism: 3-facets prism, rotating in both directions

Outstanding color macro effect

Independent frost effect

Integrated three features: beam, spot, and wash

Dimensions/Weight:

312x256x452mm, 13.2kgs

12.3”x10.1”x17.8”in, 29.1lbs

Photometric Diagram:

3. Control Panel

1. LED:

DMX

DMX input present

PRIMARY

Primary mode

SECONDARY

Secondary mode

SOUND

Sound activation

2. DISPLAY: To show the various menus and the selected function

3. Button:

To enter into move backward or leave the menu

To go backward to move up in the menu

DOWN

To go forward to move down in the menu

ENTER

To perform the desired functions

4. DMX IN:

For DMX512 link, use 3/5 -pin XLR cable to link the unit and DMX controller

5. DMX OUT:

For DMX512 link, use 3/5 -pin XLR cable to link the next units

6. MAINS IN: Used to connect to supply power

7. MAINS OUT: Used to connect to the next unit

8. FUSE(T 5A): Protect the unit from damage of over current

4. Color Wheel/Gobo Wheels

DANGER!

Install the color wheel/gobo wheels with the device switched off only.

Unplug from mains before changing color wheel/gobo wheels!

CAUTION: Never unscrew the screws of the rotating gobo as the ball bearing will otherwise be

opened!

5. How To Set The Unit

5.1 Main Function

Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until

the required function is shown on the monitor. Select the function by the ENTER button. Use the

UP/DOWN button to choose the submenu, press the ENTER button to store and automatically

return to the last menu. Press the MENU button or let the unit idle 30 seconds to exit menu mode.

The main functions are shown below:

DMX Functions

To select DMX Functions, press the ENTER button to confirm, use the UP/DOWN button to select

DMX Address, DMX Channel Mode or DMX State.

DMX Address

To select DMX Address, press the ENTER button to confirm. Use the UP/DOWN button to adjust the

address from 001 to 512, press the ENTER button to store. Press the MENU button back to the last

menu or let the unit idle 30 seconds to exit menu mode.

DMX Channel Mode

To select DMX Channel Mode, press the ENTER button to confirm. Use the UP/DOWN button to

select Mode1(17) or Mode2(20) channels mode, press the ENTER button to store. Press the MENU

button back to the last menu or let the unit idle 30 seconds to exit menu mode.

DMX State

To select DMX State, press the ENTER button to confirm. Use the UP/DOWN button to select

Pri./Sec.(primary/secondary mode), Blackout(fixture blacks out if DMX signal stops) or Hold(fixture

continues to obey the last command it received Via DMX if DMX signal stops), press the ENTER

button to store. Press the MENU button back to the last menu or let the unit idle 30 seconds to exit

menu mode.

Fixture Setting

To select Fixture Setting, press the ENTER button to confirm, use the UP/DOWN button to select

Pan Inverse, Tile Inverse, P/T Feedback, Dimmer Curve or Show Focus.

Pan Inverse

To select Pan Inverse, press the ENTER button to confirm. Use the UP/DOWN button to select No

(normal) or Yes (pan inverse), press the ENTER button to store. Press the MENU button back to the

last menu or let the unit idle 30 seconds to exit menu mode.

Tilt Inverse

To select Tilt Inverse, press the ENTER button to confirm. Use the UP/DOWN button to select No

(normal) or Yes (tilt inverse), press the ENTER button to store. Press the MENU button back to the

last menu or let the unit idle 30 seconds to exit menu mode.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ACME Beleuchtungsausrüstung Handbücher

ACME

ACME Thunderroar Bedienungsanleitung

ACME

ACME LED-245/2 Bedienungsanleitung

ACME

ACME VOGUE Bedienungsanleitung

ACME

ACME BW-54-10FC II RL Bedienungsanleitung

ACME

ACME Neozone Bedienungsanleitung

ACME

ACME Libre Bedienungsanleitung

ACME

ACME Stage Par 220MP-220 Bedienungsanleitung

ACME

ACME LED-747-1W Bedienungsanleitung

ACME

ACME BP-183 RGBW S R DXX Bedienungsanleitung

ACME

ACME Whack Bedienungsanleitung

ACME

ACME Xperior 700SZ Spot Bedienungsanleitung

ACME

ACME Oxygen Bedienungsanleitung

ACME

ACME Gemini Bedienungsanleitung

ACME

ACME XP-5000WZ Bedienungsanleitung

ACME

ACME FLASHDOT Bedienungsanleitung

ACME

ACME LED-0408 Bedienungsanleitung

ACME

ACME Spider FC Bedienungsanleitung

ACME

ACME CB-16TC Bedienungsanleitung

ACME

ACME DAZZLED COLORLED-430 Bedienungsanleitung

ACME

ACME VENOM LED-460 Bedienungsanleitung

ACME

ACME LED-767 RGBW Bedienungsanleitung

ACME

ACME ENERGY SPOT XA-400 SPOT Bedienungsanleitung

ACME

ACME LED-WAV-10W Bedienungsanleitung

ACME

ACME IP Cabin AR-01 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung