ACME Thunderroar Bedienungsanleitung

CONTENTS

Safety Instruction ............................................................................... 2

Technical Specifications ...................................................................... 3

Installation and Connection ................................................................ 4

Description ........................................................................................... 6

4.1

Control Panel

.................................................................................. 6

How To Set The Unit ........................................................................... 7

5.1

Main Function

................................................................................. 7

5.2

Home Position Adjustment

........................................................... 13

Control By Universal DMX Controller ................................................ 16

6.1

Connection

................................................................................... 16

6.2

Address Setting

............................................................................. 17

6.3

DMX 512 Configuration

................................................................ 17

Error Information ............................................................................... 21

Troubleshooting ............................................................................... 22

Fixture Cleaning ................................................................................ 22

1.Safety Instruction

WARNING

Please read the instruction carefully which includes important information

about the installation, usage and maintenance.

Please keep this User Manual for future consultation. If you sell the fixture to another user, be sure

that they also receive this instruction booklet.

Please unpack and check carefully there is no transportation damage before using the fixture.

Please ground the power cord to prevent electric shock.

Please disconnect main power before servicing and maintenance.

This product is suitable for indoor use and wet locations. Do not immerse in water.

The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surfaces. Be sure that no ventilation slots are blocked.

The maximum ambient temperature is Ta: 40℃. DO NOT operate it where the temperature is higher

than this.

Unit surface temperature may reach up to 75℃. Don’t touch with bare hands during its operation.

In the event of serious operating problem, stop using the fixture immediately. Never try to repair the

fixture by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please

contact the nearest authorized technical assistance center. Always use the same type spare parts.

DO NOT connect the device to any dimmer pack.

DO NOT touch the wire when the lamp is running to avoid electric shock.

The housing must be replaced if they are visibly damaged.

DO NOT look straight at the light when it is on.

There are no user serviceable parts inside the fixture. Do not open the housing or attempt any

repairs by yourself. In the unlikely event your fixture may require service, please contact your nearest

dealer.

2.Technical Specifications



Power Voltage:

AC 100~240V, 50/60Hz



PowerConsumption:

710W



LightSource:

PBLA-15LTE-S



Beam Angle:

16°/31°/45°

Control:

DMX Channel: 14 channel modes

Control Mode: DMX512, RDM



Construction:

OLED display

Data In/Out: 3-pin IP XLR (5-pin IP XLR is optional)

Power In/Out: Waterproof Power Connector in/out

Protection Rating: IPX4

Dimension/Weight:

503 x 183 x 318mm, 10.5kgs

19.8"x 7.2" x 12.5"in,23.1lbs

Installation and Connection

The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed

to avoid vibration and slipping while operating. Always ensure that the structure to which you are

attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight. Also always

use a safety cable that can hold 12 times of the weight of the unit when installing the fixture.

The equipment must be fixed by professionals. And it must be fixed at a place where is out of the touch

of people and has no one pass by or under it. The installation height of the equipment is between 0 and

30 meters.

Installation mode of the hanging bracket: Installation mode of a single angle-adjustable

equipment’s hanging bracket:

Installation mode of the bolt: Assemblymethodbetweentwoequipment:

Installationmodeofthebighangingbracket(operational):

Assemblymethodbetweenmultipleequipment:

Warning: no more than 7 equipment can be spliced vertically

4. Description

4.1ControlPanel

Display:

To show the various menus and the selected function

Button:

To enter into move backward or leave the menu

To go backward to move up in the menu

DOWN

To go to move down in the menu

ENTER

To perform the desired functions

DMX input:

For DMX512 operation, use 3-pin XLR plug cable to link the units together. (5-pin IP XLR is

optional)

DMX output:

For DMX512 operation, use 3-pin XLR plug cable to link the next unit. (5-pin IP XLR is optional)

Power in:

Used to connect to supply power

Power out:

Used to connect to the next fixture

How To Set The Unit

5.1 MainFunction

Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until the

required function is shown on the monitor. Select the function by the ENTER button. Use the UP/DOWN

button to choose the submenu, press the ENTER button to store and automatically return to the last

menu. Press the MENU button or let the unit idle one minute to exit menu mode.

The main functions are shown below (the grayed boxes are preset settings):

Manual

RDM UID xxxxxx

Error Logs

Fixture Errors

Reset Error Log No

Yes Passsword=050

RDM UID xxxxxx

Error Logs

Fixture Errors

Reset Error Log No

Yes Passsword=050

RDM UID xxxxxx

Error Logs

Fixture Errors

Reset Error Log No

Yes Passsword=050

RDM UID xxxxxx

Error Logs

Fixture Errors

Reset Error Log No

Yes Passsword=050

RDM UID xxxxxx

Error Logs

Fixture Errors

Reset Error Log No

Yes Passsword=050

RDM UID

XXXXXX

Error Logs

Passsword=050

Fixture Errors

Reset Error Log

DMX Settings

To select DMX Settings press the ENTER button to confirm. Use the UP/DOWN button to select DMX

Address, Channel Mode or No DMX Status.

DMX Address —DMX512 address setting

To select DMX Address, press the ENTER button to confirm. Use the UP/DOWN button to adjust the

address from 001 to 504, press the ENTER button to store. Press the MENU button back to the last

menu or let the unit idle one minute to exit menu mode.

Channel Mode — channel mode

To select Channel Mode, press the ENTER button to confirm. Use the UP/DOWN button to select 5

channel 8bit channels mode, 8channel, 9 channel

, 10 channel 16 bit channels mode, 1pixel DMX

Channel,2Vpixel DMX Channel , 2Hpixel DMX Channel , 4Vpixel DMX Channel , 4Hpixel DMX Channel ,

8Vpixel DMX Channel , 8Hpixel DMX Channel , 16pixel DMX Channel ,or68channel press the ENTER

button to store. Press the

MENU button back to the last menu or let the unit idle one minute to exit

menu mode.

No DMX Status— fixture state while DMX single stops

To select No DMX Status, press the ENTER button to confirm. Use the UP/DOWN button to select

Black Out ， Hold or Manual, press the ENTER button to store. Press the MENU button back to the

last menu or let the unit idle one minute to exit menu mode.

Fixture Settings

To select Fixture Settings, press the ENTER button to confirm. Use the UP/DOWN button to select Fan

Mode, Dimmer Curve, Dimmer Speed or White Balance.

Fan Mode

To select Fan Mode, press the ENTER button to confirm. Use the UP/DOWN button to select Auto or

Silent, press the ENTER button to store. Press the MENU button back to the last menu or let the unit

idle one minute to exit menu mode.

Inhaltsverzeichnis

Andere ACME Beleuchtungsausrüstung Handbücher

ACME

ACME Colortec 250 Bedienungsanleitung

ACME

ACME BOOTES Bedienungsanleitung

ACME

ACME CA-DC6S Bedienungsanleitung

ACME

ACME TOUR PIXEL BAR 1010 II Bedienungsanleitung

ACME

ACME Glamour 350Z Bedienungsanleitung

ACME

ACME LP-1600 BD30 Bedienungsanleitung

ACME

ACME DMX512 Dynamic Scan Bedienungsanleitung

ACME

ACME XP-5000WZ Bedienungsanleitung

ACME

ACME ASTRO LED-256D Bedienungsanleitung

ACME

ACME Oxygen Bedienungsanleitung

ACME

ACME V-BOX Bedienungsanleitung

ACME

ACME Xperior 700SZ Spot Bedienungsanleitung

ACME

ACME Stag Par MP-200 Bedienungsanleitung

ACME

ACME IM-250 SP Bedienungsanleitung

ACME

ACME SABER HYBRID PRO Bedienungsanleitung

ACME

ACME Spartan Hybrid C Bedienungsanleitung

ACME

ACME Sunrise Bedienungsanleitung

ACME

ACME DIABOLO 500 Bedienungsanleitung

ACME

ACME Dynamic 25 Spin LED?GF25 Bedienungsanleitung

ACME

ACME Thunderbreaker Bedienungsanleitung

ACME

ACME LED Move 600SE Bedienungsanleitung

ACME

ACME BIG BANG Bedienungsanleitung

ACME

ACME IP Cabin AR-01 Bedienungsanleitung

ACME

ACME LED-PS10 Bedienungsanleitung

Beliebte Beleuchtungsausrüstung Handbücher anderer Marken

Brizo

Brizo 8SP-MU-4 Bedienungsanleitung

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Bedienungsanleitung

IKEA

IKEA BJÖRKSPIREA Bedienungsanleitung

Laserworld

Laserworld Evolution Series ES-400RGB Bedienungsanleitung

EuroLite

EuroLite LED B-40 Bedienungsanleitung

Qazqa

Qazqa Suplux SL 3 Black 103062 Bedienungsanleitung

Commercial Electric

Commercial Electric 54568141 Bedienungsanleitung

CREE LIGHTING

CREE LIGHTING 304 Series Bedienungsanleitung

Goobay

Goobay 49867 Bedienungsanleitung

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Bedienungsanleitung

Alkalite

Alkalite Krypton KT-81 Bedienungsanleitung

Clas Ohlson

Clas Ohlson GU10 Bedienungsanleitung

DTS

DTS DELTA 10 F Bedienungsanleitung

ring

ring Solar Steplight Bedienungsanleitung

One Stop Gardens

One Stop Gardens 57696 Montageanleitung

SIREM

SIREM Swimeo A2 Bedienungsanleitung

Silvair

Silvair MESH-CEDRP Bedienungsanleitung

S&P

S&P PCRL80 Bedienungsanleitung