ADTRAN NetVanta 8044M Bedienungsanleitung

NETVANTA HSSI WIDE MODULE P/N 1200934L1

For more detailed documentation, visit us online at www.adtran.com

Quick Start Guide

SPECIFICATIONS

Interface Type: 50 pin SCSI-II female connector

Line Rate: 0-52 Mbps

Signal Type: Electrically balanced with Non Return to Zero

encoding

Diagnostics/Testing: HSSI Loopbacks, HSSI External loopback control

with T3SU or DSU/CSU

Environmental: Operating Temperature: 0°C to 50°C

Storage Temperature: -20°C to 70°C

Relative Humidity: up to 95% Noncondensing

Compliance: FCC Part 15 Class A, UL 60950/CSA-C22.2

No. 60950, EN 60950, IEC 60950,

AS/NZS 60950, EN 55022, EN 54024

HSSI PINOUT

PIN# (+ side) PIN# (- side) Direction Description

1 26 — HSSI SG - Signal Ground

2 27 I HSSI RT - Receive Timing

3 28 I HSSI CA - DCE Available

4 29 I HSSI RD - Receive Data

5 30 I HSSI LC - Loopback Circuit C

6 31 I HSSI ST - Send Timing

7 32 — HSSI SG - Signal Ground

8 33 O HSSI TA - DTE Available

9 34 O HSSI TT - Terminal Timing

10 35 O HSSI LA - Loopback Circuit A

11 36 O HSSI SD - Send Data

12 37 O HSSI LB - Loopback Circuit B

13 38 — HSSI SG - Signal Ground

14 — — No Connection

15 40 — No Connection

16 41 — No Connection

17 42 — No Connection

18 43 — No Connection

19 44 — HSSI SG - Signal Ground

20 45 — No Connection

21 46 — No Connection

22 47 — No Connection

23 — — No Connection

24 49 I HSSI TM - Test Mode

25 50 — HSSI SG - Signal Ground

INSTALLATION INSTRUCTIONS

1. Remove the cover plate from the appropriate option slot in the

NetVanta 5305 Base Unit.

2. Slide the NetVanta HSSI Wide Module into the option slot until the

module is firmly positioned against the front of the chassis.

3. Secure the thumbscrews at both edges of the module. Tighten with a

screwdriver.

4. Connect the cables to the associated device(s).

5. Complete the installation of the system as specified in the Hardware

Installation Guide (P/N 61200890L1-34 or P/N 61200990L1-34).

NETVANTA HSSI WIDE MODULE P/N 1200934L1

For more detailed documentation, visit us online at www.adtran.com

Quick Start Guide

COMMANDS

alias <text>

Comment line to provide text describing the interface.

<text> Up to 80 alphanumeric characters

description <text>

Comment line to provide an identifier for this interface

(for example, circuit ID, contact information, etc.)

<text> Up to 80 alphanumeric characters

external-loopback-request

Enables LC (Loopback circuit C) input to control loopback towards the network.

no external-loopback-request

Disables LC (Loopback circuit C) input control of loopback.

loopback {dce | dte | line | remote |none}

Initiates or removes the specified loopback.

dce Loops the physical interface toward the DCE.

dte Commands the DCE to loopback to DTE.

line Commands the DCE to loopback toward the DTE at

the line port.

remote Commands the remote DCE device to loopback for

purposes of testing data communication channels.

none Removes the loopback.

shutdown

Turns off the interface. The no version of this command turns the interface on and

allows it to pass data.

snmp trap link-status

Enables the interface to send SNMP traps when the link status changes and controls

the SNMP variable, ifLinkUpDownTrap Enable. The default is enabled.

Andere Handbücher für NetVanta 8044M

Dieses Handbuch passt für folgende Modelle

Andere ADTRAN Netzwerk-Hardware Handbücher

ADTRAN

ADTRAN BR1 Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7000 Series Bedienungsanleitung

ADTRAN

ADTRAN IQ 710 Benutzerhandbuch

ADTRAN

ADTRAN OSU 300 Bedienungsanleitung

ADTRAN

ADTRAN Total Access 374 Produkthandbuch

ADTRAN

ADTRAN TRACER 4106 Plan Benutzerhandbuch

ADTRAN

ADTRAN DS3 MX Bedienungsanleitung

ADTRAN

ADTRAN Total Access 300 Series Produkthandbuch

ADTRAN

ADTRAN T400 Bedienungsanleitung

ADTRAN

ADTRAN T200 HTU-R Bedienungsanleitung

ADTRAN

ADTRAN Stub Routing Bedienungsanleitung

ADTRAN

ADTRAN TSU 120 Bedienungsanleitung

ADTRAN

ADTRAN TSU 100 Bedienungsanleitung

ADTRAN

ADTRAN 1442880G1 Bedienungsanleitung

ADTRAN

ADTRAN U-BR1TE Wartungs- und Serviceanleitung

ADTRAN

ADTRAN U-BR1TE Bedienungsanleitung

ADTRAN

ADTRAN 1203019L2 Bedienungsanleitung

ADTRAN

ADTRAN FXS+ Dual Bedienungsanleitung

ADTRAN

ADTRAN HDSL 3192 HTU-C Bedienungsanleitung

ADTRAN

ADTRAN TRACER 4102 Benutzerhandbuch

ADTRAN

ADTRAN NetVanta 2300 Bedienungsanleitung

ADTRAN

ADTRAN SFP Series Bedienungsanleitung

ADTRAN

ADTRAN 401 1 GE Micro ONT Bedienungsanleitung

ADTRAN

ADTRAN Total Access 300 Series Produkthandbuch

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung