ADTRAN NetVanta Analog Modem Dial Backup Interface... Bedienungsanleitung

NETVANTA ANALOG MODEM DIAL BACKUP INTERFACE MODULE (DIM) P/N 1200864L1

For more detailed documentation, visit us online at www.adtran.com

Quick Start Guide

SPECIFICATIONS

• ITU V.90 Compliant

• Async

INSTALLATION INSTRUCTIONS

1. Remove power from the base unit.

2. If the Network Interface Module (NIM) is already in the

NetVanta chassis, release the pins at both edges of the

NIM faceplate and slide the module out of the chassis.

3. Carefully align the P1 connector on the NIM with the J1

connector on the analog modem DIM. Using only

fingertip pressure so that neither circuit board bends or

flexes, ensure that the connectors are firmly seated.

Secure the analog modem DIM to the NIM using the

screws and standoff posts supplied.

12 VDC

POWER

CONSOLE

LAN

SLOT 1 NET/D BU

WAN-DDS DBU

4. Slide the NIM with the analog modem DIM attached

into the NetVanta option slot until the NIM is firmly

seated against the back of the chassis.

5. Secure the pins at both edges of the NIM.

6. Connect the cables to the associated device(s).

7. Complete installation of the base unit.

8. Restore power to the base unit.

ANALOG MODEM DBU (RJ-48C) CONNECTION PINOUT

Pin Name Description

1-3 — Unused

4 R Network-Ring

5 T Network-Tip

6-8 — Unused

INSTALLATION INSTRUCTIONS (CONTINUED)

NETVANTA ANALOG MODEM DIAL BACKUP INTERFACE MODULE (DIM) P/N 1200864L1

For more detailed documentation, visit us online at www.adtran.com

Quick Start Guide

alias <text>

Comment line to provide the text name assigned by the SNMP network management system.

caller-id override always <number>

Forces a replacement of the incoming caller ID number with the number given. The received

caller ID, if any, is discarded, and the given override number is used to connect the incoming

call to a circuit of the same number. Use no caller-id override (default) to disable any caller

ID overrides.

caller-id override if-no-CID <number>

Allows a replacement of the received caller ID number, but only if there is no caller ID

available on the incoming call. The received caller ID, if available, is used to connect the call.

However, if no caller ID is received, the given override number is used to connect the

incoming call to a circuit of the same number.

description <text>

Comment line to provide an identifier for this interface (for example, circuit ID, contact

information, etc.).

dialin

Enables the modem for remote console dialin disabling the use of the modem for dial-backup.

shutdown

Turns off the unit. The no version of this command turns the interface on and allows it to pass

data.

ANALOG MODEM DIAL BACKUP DIM COMMANDS

Inhaltsverzeichnis

Andere ADTRAN Netzwerk-Hardware Handbücher

ADTRAN

ADTRAN BR10 Bedienungsanleitung

ADTRAN

ADTRAN Total Reach TRDDB Bedienungsanleitung

ADTRAN

ADTRAN Dual Nx56/64 Bedienungsanleitung

ADTRAN

ADTRAN NETVANTA UNIFIED COMMUNICATIONS DEMO KIT Bedienungsanleitung

ADTRAN

ADTRAN Total Access 900 Series Bedienungsanleitung

ADTRAN

ADTRAN IQ 710 Benutzerhandbuch

ADTRAN

ADTRAN Total Access 5006 Bedienungsanleitung

ADTRAN

ADTRAN ATLAS 800 Series Module QUAD E1 Benutzerhandbuch

ADTRAN

ADTRAN Octal IDSL DSLAM Octal IDSL Bedienungsanleitung

ADTRAN

ADTRAN U-BR1TE Bedienungsanleitung

ADTRAN

ADTRAN 1442980G1C Bedienungsanleitung

ADTRAN

ADTRAN Stub Routing Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 1335 Series Bedienungsanleitung

ADTRAN

ADTRAN BVL3ADJD Bedienungsanleitung

ADTRAN

ADTRAN EXPRESS 6503 Bedienungsanleitung

ADTRAN

ADTRAN TRACER 4205 Bedienungsanleitung

ADTRAN

ADTRAN NetVanta Series Bedienungsanleitung

ADTRAN

ADTRAN Fractional T1 Tandem Channel Unit FT1-TDM Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 5660 Bedienungsanleitung

ADTRAN

ADTRAN GPON 452 Bedienungsanleitung

ADTRAN

ADTRAN 850-VoDSL Bedienungsanleitung

ADTRAN

ADTRAN IQ 310 Bedienungsanleitung

ADTRAN

ADTRAN 1203019L2 Bedienungsanleitung

ADTRAN

ADTRAN P/N 1204011L1 Service-Handbuch

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung