ADTRAN TSU 120 Bedienungsanleitung

TSU 120 & 120e

User Manual

Part Number

1202129L1

1202129L2

January 1999

61202129L1-1C

Trademarks:

Windows is a registered trademark of Microsoft Corp.

T-WATCH Pro is a trademark of ADTRAN, Inc.

OpenView® is a trademark of Hewlett Packard.

SLC96 is a trademark of AT&T

901 Explorer Boulevard

P.O. Box 140000

Huntsville, AL 35814-4000

Phone: (256) 963-8000

Printed in USA.

iii

ADTRAN Year 2000 (Y2K) Readiness Disclosure

ADTRAN has established a Year 2000 program to ensure that our products

will correctly function in the new millennium. ADTRAN warrants that all

products meet Y2K specifications regardless of model or revision.

Information about ADTRAN’s Y2K compliance program is available at the

following locations:

ADTRAN Web Site www.adtran.com

Product Matrix www.adtran.com/y2kfax.html

Faxback Document Line (256) 963-8200

Y2K plans and product certifications are listed in

the matrix.

Y2K Project Line (256) 963-2200

E-mail year2000@adtran.com

Notes provide additional useful information.

Cautions signify information that could prevent service interrup-

tion.

Warnings provide information that could prevent damage to the

equipment or endangerment to human life.

FCC Regulations Require that the Following Information be

Provided to the Customer

1. This equipment complies with Part 68 of the FCC rules. The required label

is attached to the bottom of the chassis.

2. An FCC compliant telephone cord and modular plug is provided with this

equipment. This equipment is designed to be connected to the telephone

network or premises wiring using a compatible modular jack which is Part

68 compliant. See installation instructions for details.

3. If your TSU 120 causes harm to the telephone network, the Telephone Com-

pany may discontinue your service temporarily. If possible, they will

notify you in advance. If advance notice is not practical, you will be noti-

fied as soon as possible. You will be advised of your right to file a com-

plaint with the FCC.

4. Your telephone company may make changes in its facilities, equipment,

operations, or procedures that could affect the proper operation of your

equipment. If they do, you will be given advance notice so as to give you

an opportunity to maintain uninterrupted service.

5. If you experience trouble with the equipment TSU 120, please contact

ADTRAN at (256) 963-8000 for repair/warranty information. The tele-

phone company may ask you to disconnect this equipment from the net-

work until the problem has been corrected, or until you are sure the

equipment is not malfunctioning.

6. This unit contains no user serviceable parts.

7. The following information may be required when applying to your local

telephone company for leased line facilities.

Service Type REN/SOC FIC USOC

1.544 Mbps -SF 6.0N 04DU9-BN RJ-48C

1.544 Mbps - SF and B8ZS 6.0N 04DU9-DN RJ-48C

1.544 Mbps - ESF 6.0N 04DU9-1KN RJ-48C

1.544 Mbps - ESF and B8ZS 6.0N 04DU9-1SN RJ-48C

Federal Communications Commission Radio Frequency

Interference Statement

This equipment has been tested and found to comply with the limits for

a Class A digital device, pursuant to Part 15 of the FCC Rules. These lim-

its are designed to provide reasonable protection against harmful inter-

ference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual,

may cause harmful interference to radio frequencies. Operation of this

equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own

expense.

Shielded cables must be used with this unit to ensure compliance with

Class A FCC limits.

Changes or modifications to this unit not expressly approved by the

party responsible for compliance could void the user’s authority to op-

erate the equipment.

vii

CANADIAN EMISSIONS REQUIREMENTS

This digital apparatus does not exceed the Class A limits for radio noise

emissions from digital apparatus as set out in the interference-causing

equipment standard entitled “Digital Apparatus,” ICES-003 of the De-

partment of Communications.

Cet appareil nuerique respecte les limites de bruits radioelectriques ap-

plicables aux appareils numeriques de Class A prescrites dans la norme

sur le materiel brouilleur: “Appareils Numeriques,” NMB-003 edictee

par le ministre des Communications.

viii

CANADIAN EQUIPMENT LIMITATIONS

The Industry Canada Certification label identifies certified equipment.

This certification means that the equipment meets certain telecommu-

nications network protective, operational, and safety requirements.

The Department does not guarantee the equipment will operate to the

user's satisfaction.

Before installing this equipment, users should ensure that it is permissi-

ble to be connected to the facilities of the local telecommunications com-

pany. The equipment must also be installed using an acceptable method

of connection. In some cases, the company's inside wiring associated

with a single line individual service may be extended by means of a cer-

tified connector assembly (telephone extension cord). The customer

should be aware that compliance with the above conditions may not

prevent degradation of service in some situations.

Repairs to certified equipment should be made by an authorized Cana-

dian maintenance facility designated by the supplier. Any repairs or al-

terations made by the user to this equipment, or equipment

malfunctions, may give the telecommunications company cause to re-

quest the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground

connections of the power utility, telephone lines and internal metallic

waterpipe system, if present, are connected together. This precaution

may be particularly important in rural areas.

Users should not attempt to make such connections themselves, but

should contact the appropriate electric inspection authority, or an elec-

trician, as appropriate.

The Load Number (LN) assigned to each terminal device denotes the

percentage of the total load to be connected to a telephone loop which is

used by the device, to prevent overloading. The termination on a loop

may consist of any combination of devices subject only to the equipment

that the total of the LNs of all devices does not exceed 100.

The ringer equivalence number (REN) assigned to each terminal adapter

is used to determine the total number of devices that may be connected

to each circuit. The sum of the RENs from all devices in the circuit

should not exceed a total of 5.0.

Affidavit Requirements for Connection To Digital Services

• An affidavit is required to be given to the telephone company when-

ever digital terminal equipment without encoded analog content and

billing protection is used to transmit digital signals containing encod-

ed analog content which are intended for eventual conversion into

voiceband analog signals and transmitted on the network.

• The affidavit shall affirm that either no encoded analog content or

billing information is being transmitted or that the output of the de-

vice meets Part 68 encoded analog content or billing protection spec-

ifications.

• End user/customer will be responsible to file an affidavit with the lo-

cal exchange carrier when connecting unprotected CPE to a 1.544

Mbps or subrate digital services.

• Until such time as subrate digital terminal equipment is registered

for voice applications, the affidavit requirement for subrate services

is waived.

Affidavit For Connection Of Customer Premises Equipment To 1.544 Mbps

And/or Subrate Digital Services

For the work to be performed in the certified territory of

_______________________________________(telco name)

State of ___________________________________________

County of ________________________________

I, ___________________________________ (name),

(business address), ______________________ (telephone number) being

duly sworn, state:

I have responsibility for the operation and maintenance of the terminal

equipment to be connected to 1.544 Mbps and/or ________ subrate dig-

ital services. The terminal equipment to be connected complies with

Part 68 of the FCC rules except for the encoded analog content and bill-

ing protection specifications. With respect to encoded analog content

and billing protection:

( ) I attest that all operations associated with the establishment, main-

tenance, and adjustment of the digital CPE with respect to analog con-

tent and encoded billing protection information continuously complies

with Part 68 of the FCC Rules and Regulations.

( ) The digital CPE does not transmit digital signals containing encoded

analog content or billing information which is intended to be decoded

within the telecommunications network.

( ) The encoded analog content and billing protection is factory set and

is not under the control of the customer.

I attest that the operator(s)/maintainer(s) of the digital CPE responsible

for the establishment, maintenance, and adjustment of the encoded an-

alog content and billing information has (have) been trained to perform

these functions by successfully having completed one of the following

(check appropriate blocks):

Andere Handbücher für TSU 120

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere ADTRAN Netzwerk-Hardware Handbücher

ADTRAN

ADTRAN NIU3 Bedienungsanleitung

ADTRAN

ADTRAN 1442120G1 Bedienungsanleitung

ADTRAN

ADTRAN HDSL4 Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 5660 Bedienungsanleitung

ADTRAN

ADTRAN Total Access 300 Series Produkthandbuch

ADTRAN

ADTRAN Total Reach DDS-R Bedienungsanleitung

ADTRAN

ADTRAN 1203019L2 Bedienungsanleitung

ADTRAN

ADTRAN DSU III TDM Bedienungsanleitung

ADTRAN

ADTRAN TRACER 4102 Benutzerhandbuch

ADTRAN

ADTRAN jobAid+ 1200482G1 Bedienungsanleitung

ADTRAN

ADTRAN Express 3100 Bedienungsanleitung

ADTRAN

ADTRAN Fractional T1 Tandem Channel Unit FT1-TDM Bedienungsanleitung

ADTRAN

ADTRAN TRACER 4x06 Referenzhandbuch

ADTRAN

ADTRAN Total Access 832 Bedienungsanleitung

ADTRAN

ADTRAN ENHANCED PSD 239 H2R Bedienungsanleitung

ADTRAN

ADTRAN ATLAS 800 Series Module QUAD E1 Bedienungsanleitung

ADTRAN

ADTRAN 411 Bedienungsanleitung

ADTRAN

ADTRAN Express 6500 Series Bedienungsanleitung

ADTRAN

ADTRAN HD-10 BRI MUX Bedienungsanleitung

ADTRAN

ADTRAN Total Access 1248 Bedienungsanleitung

ADTRAN

ADTRAN ATLAS 810 Plus Bedienungsanleitung

ADTRAN

ADTRAN NetVanta Series Bedienungsanleitung

ADTRAN

ADTRAN TRACER 4205 Bedienungsanleitung

ADTRAN

ADTRAN Total Access 3050 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung