Advantech UNO-238 V2 Installations- und Betriebshandbuch

UNO-238 V2 Startup Manual 1

Before you begin installing your card, please make sure that

the following items have been shipped:

1. UNO-238 V2 bare-bone system x 1

2. Startup manual EN\CN\TC for UNO-238 V2 1st Ed

P/N: 2044023800

3. 84W 12V adapter

P/N: XUNO-FSP084-DHAN3

4. Thermal pad (for CPU)

P/N: 1990040776N000

If any of these items are missing or damaged, please con-

tact your distributor or sales representative immediately.

Note:  AcrobatReaderisrequiredtoviewanyPDFle.

Acrobat Reader can be downloaded at: get.

adobe.com/reader (Acrobat is a trademark of

Adobe)

UNO-238 V2

Intel®12th Generation Core i Compact IoT Edge

Computer

Startup Manual

Caution: DANGER OF EXPLOSION IF BATTERY IS

INCORRECTLY REPLACED. REPLACE ONLY

WITH THE SAME OR EQUIVALENT TYPE

RECOMMENDED BY THE MANUFACTURER,

DISCARD USED BATTERIES ACCORDING TO

THE MANUFACTURER’S INSTRUCTIONS.

Attention:DANGER D’EXPLOSION SI LA BATTERIE EST

INEXACTEMENT REMPLACÉE. REMPLACEZ

SEULEMENT AVEC LA MÊME CHOSE OU

LE TYPE ÉQUIVALENT RECOMMANDÉ PAR

LE FABRICANT, JETTENT LES BATTERIES

UTILISÉES INSTRUCTIONS DE S SELON

FABRICANT DES’.

Processor System

• Intel®i7-1265UE 10 core, 1.7 GHz (up to 4.7 GHz)

• Intel®i5-1245UE 10 core, 1.5 GHz (up to 4.4 GHz)

• Intel®i3-1215UE 6 core, 1.2 GHz (up to 4.4 GHz)

Memory

• Supports dual channel DDR5 SODIMM-4800 MHz; Max.

capacity is 64 GB

Graphics

• Intel®Iris Xe®Graphics

Serial Ports

• 2 x RS-232/422/485 (50 to 115.2Kbps)

Ethernet

• LAN A: Intel®i226, 10/100/1000/2500Mbps

• LAN B: Intel®i219-LM, 10/100/1000Mbps

Storage

• 1 x M.2 B Key 2242 (PCIe x1/SATA, USB2.0)

• 1 x M.2 M Key 2280 (PCIe x4, Gen4 NVMe)

Expansion

• 1 x M.2 B-Key 3042/3052 (PCIe x1/SATA, USB 2.0)

• 1 x M.2 E-Key 2230 (PCIe x1, USB 2.0)

• 1 x M.2 M-Key 2280 (PCIe x4, Gen 4 NVMe)

External I/O

• Display: 1 x DP, 1 x HDMI

• USB:

4 x USB 3.2 (Gen2 10Gbps)

2 x USB Type-C (USB3.2 Gen2, supports DP1.4)

The Type-C one at rear side also supports Thunderbolt 4

• Serial: 2 x RS-232/422/485

• CANBus: 2 x CAN2.0 (Combo)

• Others: 1 x GPIO (8 bit)

Specications

Packing List

For more information on this and other Advantech

products, please visit our website at:

http://www.advantech.com

For technical support and service, please visit our sup-

port website for UNO-238 V2 at:

months extra warranty for Free at:

http://www.register.advantech.com

Part No. 2044023800 1st Edition

Printed in China September 2023

Packing List (Cont.)

2 UNO-238 V2 Startup Manual

Power Requirement

• Power type: ATX

• Power Input Voltage: 12VDC

• Power Connector: 1 x Terminal block

• Minimum Power Input: 12VDC 7A

ThisproductisintendedtobesuppliedbyaULcertied

powersupplyorULcertiedDCsourcerated12V

minimum. If you need further assistance, please contact

Advantech for further information.

Environmental

• Operational Temperature:

-20~60°Cwith0.7m/sairow

Note: With extended temperature peripherals, please

refer to the optional memory list in Datasheet.

• Storage Temperature: -40 ~ 85°C (-40 ~ 185°F)

• Relative Humidity: 95% @ 60°C (non-condensing)

Physical Characteristics

• Dimensions (W x H x D): 150 x 107 x 60 mm

• Weight: 1.8 kg (3.9 lb)

The board has a number of jumpers that allow you to con-

gureyoursystemtosuityourapplication.Thetablebelow

lists the function of each of the jumpers and connectors.

Connectors

Label Function

DP1 DP connector

HDMI1 HDMI connector

COM 1/2 RS-232/422/485

GPIO GPIO connector

USB 1-4 USB3.2

Type-C 1-2 Type-C

LAN A Intel i226

LAN B Intel i219-LM

CANBus 2 x CAN2.0 (combo)

DC 12V Power connector

The computer is supplied with a battery-powered real-time

clock circuit. There is a danger of explosion if the battery is

incorrectly replaced. Replace only with same or equivalent

type recommended by the manufacturer. Discard used bat-

teries according to the manufacturer’s instructions.

This device complies with the requirements in Part 15 of

the FCC rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received,

including interference that may cause undesired opera-

tion.

Specications(Cont.)

Declaration of Conformity

System I/O Interface

Battery

Jumpers and Connectors

UNO-238 V2 Startup Manual 3

Memory Installation

The UNO-238 V2 supports DDR5 SO-DIMM memory

modules. If you require a detailed list of compatible memory

modules, please get in touch with your distributor or sales

representative.

1. Unscrew (1930001241-11*4) and remove the bottom

cover (1960098469N011*1).

2. Unscrew (1930006647-01*4).

3. Unscrew (1930001241-11*4) and remove the top cover

(1960098692T011*1).

4. Apply a thermal pad (1990040776N00*1).

For DDR5 8GB or 16GB

Attach an “Up” thermal pad (1990026727N030*1)

and a “Down” thermal pad (1990040197N020*1).

Simple Maintenance Process Simple Maintenance Process (Cont.)

4 UNO-238 V2 Startup Manual

For DDR5 32GB:

Use an “Up” thermal pad (1990026727N010*1)

and a “Down” thermal pad (1990040197N000*1).

5. Install the top cover (1960098692T011*1) and lock

screws (1930001241-11*4).

6. Secure the lock screws (1930006647-01*4).

Simple Maintenance Process (Cont.)

7. Reinstall the bottom cover (1960098469N011*1) and

lock screws (1930001241-11*4).

Storage Installation

1. Unscrew (1930001241-11*4) and remove the bottom

cover (1960098469N011*1).

Simple Maintenance Process (Cont.)

UNO-238 V2 Startup Manual 5

2. Unscrew (19350304A0*1).

3. Insert the NVME Card and secure it with the lock screw

(19350304A0*1)

4. If using an M-key storage with a capacity greater than

1TB, apply a thermal pad (1990040412N000*1) to the

bottom cover.

5. Reinstall the bottom cover (1960098469N011*1) and

lock screws (1930001241-11*4).

M.2 B Key (LTE module) Installation

The UNO-238 V2 supports M.2 B key modules for both

3042 and 3052.

For B Key for 3052

1. Unscrew (1930001241-11*4) and remove the bottom

cover (1960098469N011*1).

Simple Maintenance Process (Cont.) Simple Maintenance Process (Cont.)

6 UNO-238 V2 Startup Manual

2. Remove the support bracket (1960102502T000) and

unscrew (19350304A0*1).

3. Insert the 5G module in the B key slot and secure it with

the lock screw (19350304A0*1).

4. Apply a thermal pad (1990040198N000*1) to the bot-

tom cover.

5. Reinstall the bottom cover (1960098469N011*1) and

lock screws (1930001241-11*4).

For B Key for 3042

1. Unscrew (1930001241-11*4) and remove the bottom

cover (1960098469N011*1).

2. Unscrew (19350304A0*1).

Simple Maintenance Process (Cont.) Simple Maintenance Process (Cont.)

UNO-238 V2 Startup Manual 7

3. Insert the storage module in the B key slot and secure it

with the lock screw (19350304A0*1).

4. Reinstall the bottom cover (1960098469N011*1) and

lock screws (1930001241-11*4).

Internal USB 2.0 M.2 E Key Installation

1. Unscrew (1930001241-11*4) and remove the bottom

cover (1960098469N011*1).

2. Unscrew (19350304A0*1).

3. Insert the WiFi module in the E key slot and secure it

with the lock screw (19350304A0*1).

4. Reinstall the bottom cover (1960098469N011*1) and lock

screws (1930001241-11*4).

Simple Maintenance Process (Cont.) Simple Maintenance Process (Cont.)

8 UNO-238 V2 Startup Manual

DIN-Rail Mount Installation

1. Take the mounting kit from the accessory box.

2. Secure the bracket to the bottom cover using 3 screws.

Wall Mount and Stand Mount

1. Read these safety instructions carefully.

2. Keep this Startup Manual for later reference.

3. Disconnect this equipment from any AC outlet before

cleaning. Use a damp cloth. Do not use liquid or spray

detergents for cleaning.

4. For plug-in equipment, the power outlet socket must

be located near the equipment and must be easily

accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installa-

tion. Dropping it or letting it fall may cause damage.

7. The openings on the enclosure are for air convection.

Protect the equipment from overheating. DO NOT

COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct

before connecting the equipment to the power outlet.

9. Position the power cord so that people cannot step on

it. Do not place anything over the power cord.

10. All cautions and warnings on the equipment should be

noted.

11. If the equipment is not used for a long time, disconnect

it from the power source to avoid damage by transient

overvoltage.

12. Never pour any liquid into an opening. This may cause

reorelectricalshock.

13. Never open the equipment. For safety reasons, the

equipmentshouldbeopenedonlybyqualiedservice

personnel.

14. If one of the following situations arises, get the equip-

ment checked by service personnel:

•The power cord or plug is damaged.

•Liquid has penetrated into the equipment.

•The equipment has been exposed to moisture.

•The equipment does not work well, or you cannot get

it to work according to the user’s manual.

•The equipment has been dropped and damaged.

•The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRON-

MENT WHERE THE STORAGE TEMPERATURE

MAY GO BELOW -40°C (-40°F) OR ABOVE 85°C

(185°F). THIS COULD DAMAGE THE EQUIPMENT.

THE EQUIPMENT SHOULD BE IN A CONTROLLED

ENVIRONMENT.

16. CAUTION: DANGER OF EXPLOSION IF BATTERY IS

INCORRECTLY REPLACED. REPLACE ONLY WITH

THE SAME OR EQUIVALENT TYPE RECOMMENDED

BY THE MANUFACTURER, DISCARD USED BAT-

TERIES ACCORDING TO THE MANUFACTURER’S

INSTRUCTIONS.

17. The sound pressure level at the operator’s position ac-

cording to IEC 704-1:1982 is no more than 70 dB (A).

18. RESTRICTED ACCESS AREA: The equipment should

only be installed in a Restricted Access Area.

19. DISCLAIMER: This set of instructions is given accord-

ing to IEC 704-1. Advantech disclaims all responsibility

for the accuracy of any statements contained herein.

Simple Maintenance Process (Cont.) Safety Instructions

UNO-238 V2 Startup Manual 9

IO Connectors

10 UNO-238 V2 Startup Manual

150.00

162.00

R2.00

R2.70

88.10

81.60

94.60

60.00

107.00

System Dimensions

Andere Handbücher für UNO-238 V2

Inhaltsverzeichnis

Andere Advantech Computerhardware Handbücher

Advantech

Advantech AIMC-3422 Installations- und Betriebshandbuch

Advantech

Advantech PCA-6275 Bedienungsanleitung

Advantech

Advantech UNO-2372G V2 Bedienungsanleitung

Advantech

Advantech ASMB-785 Installations- und Betriebshandbuch

Advantech

Advantech PCA-6190 Bedienungsanleitung

Advantech

Advantech MIO-2375 Installations- und Betriebshandbuch

Advantech

Advantech PPC-3151 Bedienungsanleitung

Advantech

Advantech SOM-MZ10 Installations- und Betriebshandbuch

Advantech

Advantech PCA-6742 Series Installations- und Betriebshandbuch

Advantech

Advantech MIC-75M11 Installations- und Betriebshandbuch

Advantech

Advantech PCL-848A/B Bedienungsanleitung

Advantech

Advantech MIC-3820 Installations- und Betriebshandbuch

Advantech

Advantech PCE-2033 Bedienungsanleitung

Advantech

Advantech PPC RFID 98R3P300010 Installations- und Betriebshandbuch

Advantech

Advantech MIO-5377 Bedienungsanleitung

Advantech

Advantech EPD-660 Bedienungsanleitung

Advantech

Advantech ARK-1551 Bedienungsanleitung

Advantech

Advantech PCE-5133 Installations- und Betriebshandbuch

Advantech

Advantech ROM-5420 Bedienungsanleitung

Advantech

Advantech SOM-7583 Bedienungsanleitung

Advantech

Advantech CPC-2520 Bedienungsanleitung

Advantech

Advantech VEGA-2002 Bedienungsanleitung

Advantech

Advantech SOM-5992 Bedienungsanleitung

Advantech

Advantech MIC-715 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung