Advantech USB-4751 Bedienungsanleitung
User Manual
USB-4751/4751L
48/24-channel Digital Input/
Output USB Module
USB-4751/4751L User Manual ii
Copyright
The documentation and the software included with this product are copyrighted 2023
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. The information provided in this manual is intended to be accurate and reliable.
However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any
infringements of the rights of third parties that may result from its use.
Acknowledgments
Intel and Pentium are trademarks of Intel Corporation.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Product Warranty (2 years)
Advantech warrants the original purchaser that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products that have been repaired or altered by
persons other than repair personnel authorized by Advantech, or products that have
been subject to misuse, abuse, accident, or improper installation. Advantech
assumes no liability under the terms of this warranty as a consequence of such
events.
Because of Advantech’s high quality-control standards and rigorous testing, most
customers never need to use our repair service. If an Advantech product is defective,
it will be repaired or replaced free of charge during the warranty period. For out-of-
warranty repairs, customers will be billed according to the cost of replacement mate-
rials, service time, and freight. Please consult your dealer for more details.
If you believe your product to be defective, follow the steps outlined below.
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages displayed when the prob-
lem occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain a return merchandise authori-
zation (RMA) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a completed Repair and Replacement
Order Card, and a proof of purchase date (such as a photocopy of your sales
receipt) into a shippable container. Products returned without a proof of pur-
chase date are not eligible for warranty service.
5. Write the RMA number clearly on the outside of the package and ship the pack-
age prepaid to your dealer.
Part No. 2003475102 Edition 3
Printed in Taiwan January 2023
iii USB-4751/4751L User Manual
Declaration of Conformity
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference. In
this event, users are required to correct the interference at their own expense.
CE
This product has passed the CE test for environmental specifications when shielded
cables are used for external wiring. We recommend the use of shielded cables. This
type of cable is available from Advantech. Please contact your local supplier for
ordering information.
Test conditions for passing also include the equipment being operated within an
industrial enclosure. In order to protect the product from damage caused by electro-
static discharge (ESD) and EMI leakage, we strongly recommend the use of CE-
compliant industrial enclosure products.
Technical Support and Assistance
1. Visit the Advantech website at www.advantech.com/support to obtain the latest
product information.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before calling:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Document Feedback
To assist us with improving this manual, we welcome all comments and constructive
criticism. Please send all feedback in writing to [email protected].
USB-4751/4751L User Manual iv
Safety Precautions - Static Electricity
Follow these simple precautions to protect yourself from harm and the products from
damage.
To avoid electrical shock, always disconnect the power from the PC chassis
before manual handling. Do not touch any components on the CPU card or
other cards while the PC is powered on.
Disconnect the power before making any configuration changes. A sudden rush
of power after connecting a jumper or installing a card may damage sensitive
electronic components.
v USB-4751/4751L User Manual
Contents
Chapter 1 Introduction..........................................1
1.1 Introduction ............................................................................................... 2
1.2 Hardware Features ................................................................................... 2
1.3 Software Overview.................................................................................... 2
Chapter 2 Installation............................................3
2.1 Unpacking ................................................................................................. 4
2.2 Driver Installation ...................................................................................... 4
Figure 2.1 XNavi Installer ............................................................ 4
2.2.1 Software Development Using DAQNavi SDK ............................... 5
2.3 Hardware Installation ................................................................................ 5
2.4 Hardware Uninstallation............................................................................ 6
Figure 2.2 Uninstalling USB-4751/4751L .................................... 6
Chapter 3 Signal Connections .............................7
3.1 Overview ................................................................................................... 8
3.2 I/O Connectors.......................................................................................... 8
3.2.1 Pin Assignments ........................................................................... 8
Figure 3.1 I/O Connector Pin Assignment ................................... 8
Figure 3.2 CN1/CN2 .................................................................... 8
3.2.2 Pin Assignments CN1 ................................................................... 9
Table 3.1: .................................................................................... 9
3.2.3 Pin Assignments CN2 ................................................................... 9
Table 3.2: .................................................................................... 9
3.2.4 I/O Connector Signal Description................................................ 10
Table 3.3: I/O Connector Signal Descriptions ........................... 10
3.2.5 LED Indicator Status Description ................................................ 10
Table 3.4: Table 3.2: LED Indicator Status Description............. 10
3.3 Digital I/O Connections ........................................................................... 11
3.3.1 Digital Input Signal Connection (TTL DI/O, Pull-Up)................... 11
Figure 3.3 Digital input signal connection .................................. 11
3.3.2 Digital Output Signal Connection (TTL DI/O).............................. 12
Figure 3.4 Digital output signal connection................................ 12
3.3.3 Counter Input Signal Connection (TTL, Pull-Up) ........................ 12
Figure 3.5 Counter input signal connection ............................... 12
3.3.4 Counter Output Signal Connection (TTL) ................................... 13
Figure 3.6 Counter output signal connection ............................. 13
3.4 Field Wiring Considerations .................................................................... 13
Appendix A Specifications ....................................15
A.1 Digital Input/Output ................................................................................. 16
A.2 Digital Input ............................................................................................. 16
A.3 Digital Output .......................................................................................... 16
A.4 General-Purpose Counter ....................................................................... 17
A.5 General Specifications ............................................................................ 17
USB-4751/4751L User Manual vi
Chapter 1
1Introduction
Sections include:
Introduction
Features
Specifications
USB-4751/4751L User Manual 2
1.1 Introduction
Thank you for buying the Advantech’s USB-4751/4751L data acquisition module.
The Advantech USB-4751/4751L is a powerful data acquisition (DAS) module for the
USB port. It features a unique circuit design and complete functions for data acquisi-
tion and control.
1.2 Hardware Features
USB-4751/4751L features excellent measurement & control functions:
48/24 digital input/output channels
50-pin box header
Interrupt handling
Programmable Counter/Timer
Supports both dry and wet contact
Compatible with USB 1.1/2.0
Bus-powered
1.3 Software Overview
Advantech offers device drivers, SDKs, third-party driver support and application
software to help fully exploit the functions of your DAQ devices. All these software
packages are available on Advantech website: http://www.advantech.com/.
The Advantech Navigator is a utility that allows you to set up, configure and test your
device, and later stores your settings in a proprietary database.
1. To set up the I/O device for your card, you could first run the Advantech Naviga-
tor program (by accessing Start/Programs/Advantech Automation/DAQNavi/
Advantech Navigator). The settings could also be saved to XML file, that can be
loaded in the applications using LoadProfile API.
2. You can then view the device(s) already installed on your system (if any) on the
Installed Device tree view. If the software and hardware installation are com-
pleted, you will see the device in the Installed Devices list.
Note! You can install up to sixteen USB-4751/4751L’s to a system because of
the maximum number limit of the device BoardID.
Note! The power output of an USB port is 500 mA, while the USB-4751/4751L
requires 500mA (Max.). This means that if an USB hub is used, it will
need an external power supply to support more than one USB-4751/
4751L device.
Note! For detailed specifications of USB-4751/4751L, please refer to Appendix
A, Specifications.
Chapter 2
2Installation
Sections include:
Unpacking
Driver Installation
Hardware Installation
Hardware Uninstallation
USB-4751/4751L User Manual 4
2.1 Unpacking
After receiving your USB-4751/4751L package, please inspect its contents first. The
package should contain the following items:
USB-4751/4751L Module
Shielded USB 2.0 Cable (1.72 m)
User Manual
The USB-4751/4751L Module harbors certain electronic components vulnerable to
electrostatic discharge (ESD). ESD could easily damage the integrated circuits and
certain components if preventive measures are not carefully paid attention to. Before
removing the module from the anti-static plastic bag, you should take following pre-
cautions to ward off possible ESD damage:
Touch the metal part of your computer chassis with your hand to discharge static
electricity accumulated on your body. One can also use a grounding strap.
Make contact between the anti-static bag and ground before opening.
After taking out the module, you should first:
Inspect the module for any possible signs of external damage (loose or damaged
components, etc.). If the module is visibly damaged, please notify our service depart-
ment or our local sales representative immediately. Avoid using a damaged module
with your system.
Avoid physical contact with materials that could hold static electricity such as
plastic, vinyl and Styrofoam.
2.2 Driver Installation
The driver package could be found on Advantech Support Portal (https://www.advan-
tech.com/support). Search for USB-4751/4751L on the support portal, then the corre-
sponded driver/SDK package could be found. You’ll get the XNavi installer after the
download session finishes.
Execute the installer, then it will guide you through the session. You can choose the
device and software components you’d like to install in the system (Figure 2.1). After
the selection, click on “start” to begin the installation.
Figure 2.1 XNavi Installer
Andere Handbücher für USB-4751
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Advantech E/A-System Handbücher
Advantech
Advantech ADAM-6251 Installations- und Betriebshandbuch
Advantech
Advantech PCI-1750SO Bedienungsanleitung
Advantech
Advantech PCM-3730 Bedienungsanleitung
Advantech
Advantech PCI-1727U Bedienungsanleitung
Advantech
Advantech PCL-733 Bedienungsanleitung
Advantech
Advantech PCI-1750 Bedienungsanleitung
Advantech
Advantech I/O Module 5000 Series Bedienungsanleitung
Advantech
Advantech USB-5820 Bedienungsanleitung
Advantech
Advantech PCIE-1762H Bedienungsanleitung
Advantech
Advantech MIOe-220 Installations- und Betriebshandbuch
Advantech
Advantech ADAM-3013 Bedienungsanleitung
Advantech
Advantech PCM-3724 Installations- und Betriebshandbuch
Advantech
Advantech 98910770500 Installations- und Betriebshandbuch
Advantech
Advantech PCIE-1730 Series Bedienungsanleitung
Advantech
Advantech ADAM-5013 Bedienungsanleitung
Advantech
Advantech PCI-1730 Bedienungsanleitung
Advantech
Advantech PCL-813 Bedienungsanleitung
Advantech
Advantech WISE-4060 Installations- und Betriebshandbuch
Advantech
Advantech PCI-1713 Bedienungsanleitung
Advantech
Advantech PCI-1758UDIO Installations- und Betriebshandbuch
Beliebte E/A-System Handbücher anderer Marken
WAGO
WAGO 750-344 Bedienungsanleitung
Teknim
Teknim TWM-1887 Bedienungsanleitung
Intelligent Appliance
Intelligent Appliance IA-2662-E Bedienungsanleitung
BERGHOF
BERGHOF ECC DIO 16/16 Bedienungsanleitung
Festo
Festo CP-E08-M12-CL Bedienungsanleitung
Measurement Computing
Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung
