AGCO HayBoss G2 644A Bedienungsanleitung

644A, 645A, 650A, 651A-16-OPR-BLE

12/18

Operation Manual

Model 644A,645A,650A & 651A

25 & 55 Gallon Automatic Preservative Applicator

Forage Harvester

(intentionally blank)

Harvest Tec 644, 645, 650 & 651 Operation Table of Contents

PAGE

Introduction

Model Reference Chart

Operation of Applicator

5-13

Bluetooth Operation

Turn iPad On/Off

Downloading Hay App

Shutting Down the Hay App

Bluetooth Receiver

Device Selection

Manual & Recommended Preservative

Tab Descriptions

Screen Menus

Setup Mode

Job Records

12-13

First Time and Annual Startup Instructions

Setting up the System for Initial Use

15-16

Application Rate

Baling Rate

Stroke Counter Setup

Operation Instructions

17-22

Automatic Mode

Manual Mode

Job Records

Download Job Records

Export Job Records

21-22

Wiring Diagram

Common Questions

Troubleshooting

25-26

iPad Troubleshooting

Maintenance, Winter Storage

Status Alerts

Pin Outs

29-30

Parts Breakdown

31-42

Model 644 & 645 Base Kit

Model 650 & 651 Base Kit

Pump Plate

Star Wheels, Bale Rate Sensor, and Hoses

Drain / Fill Kit

Control Boxes and Wiring Harnesses

Installation Kits

36-42

Model 4410B

Model 4415B-SO

Model 4415B

Model 4416B

Model 4485B

Model 4502B

Model 4506B

Model 4507B

Optional iPad Mini Mounting Kit

Optional iPad Display Kit

Notes

Warranty Statement

Introduction

Thank you for purchasing a Harvest Tec Model 662 Hay Preservative Applicator. This 662 applicator system

has been designed to operate through an Apple iPad (not included) using the Hay App. As well as plug directly

into most tractors that have an ISOBUS Monitor. The 662 Applicator System offers these advantages by

operating though an Apple iPad:

1. Large bright, clear, colorful display

2. More durable and can be read in bright sunlight

3. Wireless connection in cab

4. Can be used for multiple other uses than just the applicator display

5. Option to tie-into the tractor ISOBUS system

The 662 Hay Preservative Applicator System is designed to apply buffered propionic acid to the forage crop as

it is baled and will adjust the rate of application based on moisture and tonnage of the crop being harvested.

This manual will take you through the steps for installing the applicator. If you are unsure about installing the

system after consulting this manual, contact your local authorized dealership for additional assistance. For your

convenience a parts breakdown is located in the back of this manual, contact your local authorized dealer to

order the parts. This applicator is designed to apply AGCO buffered propionic acid.

*iPad Mini or iPad 3rd Generation (2012) or newer, running the current iOS operating system

or one version previous required for iPad option

Right and Left sides are determined by facing the direction of forward travel

Baler Make

Baler Model

Model

Number

Install

Kit

CASE IH

SBX530, SBX540, SBX550, SB 531 –SB 551

651

4415B

NEW HOLLAND

570, 575, 580 & BC 5060 –BC 5080

651

4415B

CASE IH

2001 AND OLDER SQUARE BALERS (TWO TIE)

650

4485B

HESSTON,

MASSEY

NEW IDEA, AND

CHALLENGER

ALL CONVENTIONAL SQUARE (TWO TIE) BALERS

650

4485B

HESSTON,

MASSEY

NEW IDEA, AND

CHALLENGER

ALL THREE TIE BALERS

650

4502B

FREEMAN

ALL THREE TIE BALERS

650

4506B

NEW HOLLAND

BB 900 & 585

650

4507B

JOHN DEERE

ALL SMALL SQUARE BALERS

645

4410B

Model Reference Chart

Bluetooth Operation

Turn On / Off iPad using the Sleep/Wake button

*(Info from Apple User’s Guide)

Turn iPad on. Hold down the Sleep/Wake button until Apple logo appears. iPad will take a moment to load.

You can lock iPad and put it to sleep when you’re not using it. Locking

iPad puts the display to sleep, saves the battery, and prevents

anything from happening if you touch the screen.

When you are not going to use the iPad for an extended period of time put the unit into sleep mode by pressing

the Sleep/Wake button. Press Sleep/Wake button to wake iPad and then unlock iPad by entering passcode.

Turn iPad off. Hold down the Sleep/Wake button for a few seconds until the slider appears onscreen, then drag

the slider to the right.

Downloading Hay App

1. If iPad does not have Wi-Fi turned on, select the Settings tab then select the Wi-Fi tab (below).

4. Select an available network when detected by the iPad, shown in area above that currently says ‘Other.’

5. Select App Store icon (below) and open. *You will need a Wi-Fi connection available to view App Store.

Download the Hay App in the App Store by searching for

‘Hay App’ in the search bar in the top right corner of screen (right):

*The advertisements displayed on the App Store screen will change.

The app will have the icon as shown:

Note: Operation requires iPad Mini or iPad 3rd Generation (2012) or newer, running the current iOS operating

system or one version previous required for iPad option.

Hay App

Sleep/Wake Button

2. Turn Wi-Fi on by sliding button to the right.

*Green bar indicates ON

3. Use same process to turn on Bluetooth function

Shutting Down the Hay App

To shut down the Hay App double click the home button (Figure A). This will show the open apps that are

running on your iPad (Figure B).

*Note: By pressing the home button one time to return to the home screen, the Hay App does not shut down.

The system will however, stop applying preservative after 10 seconds.

Slide the app you want to shut down by sliding the app toward the top of the iPad, until the app is no longer

visible (Figure C).

Bluetooth Receiver

*New for production year 2018. All Bluetooth receivers (030-6672B) are

now equipped with lights to indicated both power and iPad connection.

Blinking Lights –System is waiting for the processor to connect, which

could take up to 35 seconds.

Red Light –The Bluetooth receiver has power

Green Light –When the proper active connection is selected in the Hay

App menu, the green light will indicate connection with the iPad.

Figure A

Figure B

Figure C

Operating the Harvest Tec iPad App

After installation of the Bluetooth Receiver (030-6672A) on to the applicator system, attach the power cord

006-6650TM to supply power.

*Refer to the applicator installation manual for details on connecting the Bluetooth Receiver.

When ready to operate your applicator system, open the Hay App on the iPad by selecting the Hay App icon.

Device Selection

The app will open to the Device Menu screen as shown below. Applicators which are equipped with the

Bluetooth receiver that are within range (20’) of the iPad and have power going to them, will be shown under

the Active Connections section.

The In-Active Connections section will show applicator systems that have been connected in the past, but are

not within range of the iPad or do not currently have power going to them (bottom left).

To remove a baler from the In-Active list, slide the bar displaying the baler name to the left, and select the

Delete button that will appear (bottom right).

After the iPad connects to

the Bluetooth receiver,

select the applicator you

want to connect with.

Operating the Harvest Tec iPad App (continued)

Demo Mode

Selecting the 300 Demo or 600 Demo button (below) will allow you to view the different screens of the

applicator without requiring connection to an applicator system.

*This function is intended to be used as a visual aid, no values will be displayed.

Manual Selection

Selecting the Manual button (below) displayed to the right of the baler name will open the operation manual for

your baler.

*You do not need to be connected to a baler to open the manual and recommended preservative tabs after a

baler has been connected.

Recommended Preservative

To view recommended preservative information, application rates, and frequently asked preservative

questions, select Recommended Preservative (below).

Operating the Harvest Tec iPad App (continued)

Once you have selected the baler you want to connect with from the Device Menu, the applicator main menu

will display (below).

Ensure the iPad Bluetooth function is turned on in the Settings App.

*The applicator system will not appear under the Bluetooth Devices in the Settings App upon initial connection.

You must open the Hay App to view the available devices by selecting the Device Menu. After you have

connected through the Hay App, the system will then appear under the Bluetooth Devices in the Settings App.

Tab Descriptions

Automatic Mode: This mode allows you to use all of the applicator features such as adjusting preservative

application on the go and counting total pounds of product used.

Manual Mode: Allows operator to manually turn pumps on and off. This mode also has moisture content

displayed. Use this mode to prime pumps.

Software Versions: Selecting this tab will display the software currently installed.

Setup Mode: This mode allows the operator to adjust bale rate, application rate settings and select tip output.

Job Records: Keep track of up to 300 jobs with total product used, average moisture content, tons baled, and

baling date.

Screen Menus

Use the screen shots below to navigate through the operation screens.

Automatic Mode

Manual Mode

Operation Note:

Pressing the Home Button on the iPad WILL NOT stop application of the Harvest Tec System (see below):

Select or to stop application

*To close app see the Shutting Down Hay App Section

Bluetooth Connection Indicator

Green

-DCP is connected

Yellow

-DCP connecting

Red

-DCP not connected

Bluetooth Connection Indicator

Green

-DCP is connected

Yellow

-DCP connecting

Red

-DCP not connected

-Pump is OFF

-Pump is ON

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AGCO Landwirtschaftliche Geräte Handbücher

AGCO

AGCO FENDT 870N Bedienungsanleitung

AGCO

AGCO HayBoss G2 445, HayBoss G2 450 Bedienungsanleitung

AGCO

AGCO HayBoss G2 600A1 Bedienungsanleitung

AGCO

AGCO TG9300B Bedienungsanleitung

AGCO

AGCO Massey Ferguson 8516 Bedienungsanleitung

AGCO

AGCO 1800 Series Betriebsanleitung

AGCO

AGCO Combine CEREA 7274 Bedienungsanleitung

AGCO

AGCO MF 9205 Gebrauchsanweisung

AGCO

AGCO FENDT 5220E Gebrauchsanweisung

AGCO

AGCO Hawkeye RoGator RG900 Bedienungsanleitung

AGCO

AGCO Glencoe CP40 CULTIPACKER Bedienungsanleitung

AGCO

AGCO FENDT 700 Vario SCR Stage 3B Bedienungsanleitung

AGCO

AGCO Gleaner S67 Bedienungsanleitung

AGCO

AGCO Glencoe DR8700 Bedienungsanleitung

AGCO

AGCO HayBoss G2 596 Bedienungsanleitung

AGCO

AGCO FENDT Bedienungsanleitung

AGCO

AGCO GSI 54 Bedienungsanleitung

AGCO

AGCO LELY ATTIS PT 130 Bedienungsanleitung

AGCO

AGCO Cumberland Flex-Flo 220 Bedienungsanleitung

AGCO

AGCO Glencoe SS7400 Soil Saver Bedienungsanleitung

AGCO

AGCO VALTRA MOMENTUM Series Bedienungsanleitung

AGCO

AGCO Laverda Combines M400 Bedienungsanleitung

AGCO

AGCO Valtra BC 800 Bedienungsanleitung

AGCO

AGCO Massey Ferguson 9702 Bedienungsanleitung

Beliebte Landwirtschaftliche Geräte Handbücher anderer Marken

GSi

GSi PNEG-2314 Bedienungsanleitung

Checchi & Magli

Checchi & Magli TEXDRIVE Bedienungsanleitung

Amazone

Amazone Cenius 4003-2TX Bedienungsanleitung

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Bedienungsanleitung

Cima

Cima BLITZ Bedienungs- und Wartungsanleitung

Amazone

Amazone CombiDisc 3000 Montageanleitung

HE-VA

HE-VA Disc-Roller XL Contour Bedienungsanleitung

AGT

AGT AGT-SSFM Bedienungsanleitung

Milestone

Milestone 72-84 Bedienungsanleitung

KUHN

KUHN Hector 3000 Bedienungsanleitung

Krone

Krone X-Disc 6200 Bedienungsanleitung

Eliet

Eliet DZC450 Bedienungsanleitung

Taarup

Taarup BIO+ B4000 Bedienungsanleitung

Garland

Garland SHAKER 310 DPG Bedienungsanleitung

stable comfort

stable comfort StableWall System Bedienungsanleitung

Raven

Raven AccuBoom Bedienungsanleitung

International

International 710 Bedienungsanleitung

Ashland

Ashland HDW-3217-14 Bedienungsanleitung