Agilent Technologies U2722A Bedienungsanleitung

Agilent U2722A/U2723A USB

Modular Source Measure Unit

Voltage and current programming

and readback

Data Sheet

The Agilent U2722A/U2723A USB modular source measure unit

is more than just a power supply – it has fast response time, and

voltage and current programming/readback with high accuracy

measurement capabilities. The U2722A and its enhanced version,

the U2723A, are capable of four-quadrant operation, acting as

a current source as well as the current sink (load) with both

polarities of the output voltage. The U2723A offers additional

features such as embedded test scripts to simplify automated

testing, and faster rise time to help improve throughput during

mass testing of semiconductor components.

Features

• Three-channel SMU

• Four-quadrant operation

(±20 V, ±120 mA)

• Maximum current output of

120mA per channel

• Embedded test script that is able

to support three channels with

coherent source and measurement

capabilities (for U2723A)

• IV Curve application support in the

Agilent Measurement Manager

software (for U2723A)

• High measurement sensitivity of

100 pA with 16-bit resolution

• 0.1% basic accuracy

• Low current measurement

capability down to nA levels

• High-speed USB 2.0 and

USBTMC-USB488 standards

• Standalone and modular

• SCPI and IVI-COM supported

Increase the efficiency of your

tests

With a high measurement sensitivity

of 100 pA at 16-bit resolution for

pico-level measurement and 0.1%

accuracy, the U2722A/U2723A

USB modular source measure unit

provides more detailed and accurate

analysis and measurement results.

U2722A/U2723A supports SCPI and

IVI-COM. The SMU is compatible

with a ride range of Application

Development Environments, minimiz-

ing your work time and increasing

your software options. Save time

and effort with the bundled Agilent

Measurement Manager (AMM) soft-

ware, which coverts SCPI commands

into snippets of VEE, VB, C++ and

C# code with the command logger

function.

Pre-define test configurations

and execute commands

automatically

The U2723A USB modular source

measure unit provides an embedded

test script to help you pre-define test

configurations or duplicate tests eas-

ily without spending too much time

on programming.

Each channel in the U2723A USB

modular SMU is allocated two

memory lists, each capable of storing

up to 200 commands and results indi-

vidually. Stored commands in active

memory will be executed accord-

ingly while the measurement results

obtained are automatically stored in

the result buffer.

Four-quadrant operations with

high measurement sensitivity

and accuracy

The U2722A/U2723A SMU is a

versatile device that allows you to

perform sweep and measurement

from different operating regions

without needing extra configura-

tions. The four-quadrant operation

(±20V, ±120mA) makes the

U2722A/U2723A SMU well suited

for a wide range of test applications,

including leakage measurement, solar

cell measurement, forward/reverse

voltage and curve tracer transistors.

The U2722A/U2723A SMU also offers

high measurement sensitivity with

16-bit resolution and accuracy that

allows you to obtain more accurate

analysis and measurement results.

Introduction

+120 mA

–120 mA

+20 V–20 V

Product outlook and

dimensions

Front view

117.00 mm

180.00 mm

66.00 mm

Rear view

Top view

Product characteristics and general specifications

Remote interface • Hi-Speed USB 2.0*

• USBTMC-USB4881

Power consumption • +12 VDC, 3 A maximum

• Isolated ELV supply source

Operating environment • Operating temperature from 0 °C to +50 °C

• Relative humidity at 20% to 85% RH (non-condensing)

• Altitude up to 2000 meters

• Pollution Degree 2

• For indoor use only

Storage compliance –20 °C to 70 °C

Safety compliance Certified with:

• IEC 61010-1:2001/EN 61010-1:2001 (2nd Edition)

• USA: ANSI/UL 61010-1:2004

• Canada: CSA C22.2 No.61010-1:2004

EMC compliance • IEC 61326-1:2005/EN61326-1:2006

• Canada: ICES-001:2004

• Australia/New Zealand: AS/NZS CISPR 11:2004

Shock and vibration Tested to IEC/EN 60068-2

IO connector Output connectors

Dimension (W × D × H) Module dimension:

• 120.00 mm x 183.00 mm x 66.00 mm (with bumpers)

• 105.00 mm x 175.00 mm x 50.00 mm (without bumpers)

Weight Module dimension:

• 700 g (with bumpers)

• 650 g (without bumpers)

Warranty One year for U2722A/U2723A

Three months for standard shipped accessories

1. Compatible with Microsoft®Windows®operating systems only.

* If remote connections are necessary, a E5813A USB/LAN hub can be used. Please go to the

product’s user guide for more information.

Standard shipped accessories

• 12 V, 3 A AC/DC Power adapter

• Power cord

• Plug-in connectors and cable casing

• USB Standard-A to Mini-B interface cable

• L-Mount kit (used with modular product chassis)

• Quick Start Guide

• Agilent Measurement Manager Quick Reference Card

• Reference CD-ROM

• Agilent Automation-Ready CD-ROM (contains the Agilent IO Libraries Suite)

• Certificate of Calibration

U2722A/U2723A USB Modular Source Measure Unit

Product Specifications

Model U2722A/U2723A

Number of outputs 3

Output ratings (at 0 °C to 50 °C)

Voltage –20 V to 20 V

Current –120 mA to 120 mA

Performance specification

U2722A/U2723A Range Accuracy1Resolution

Voltage programming

12 months (at 25 °C ± 3 °C), ±(% of output + offset)

±2 V 0.075% + 1.5 mV 0.1 mV

±20 V 0.05% + 10 mV 1 mV

Current programming

12 months (at 25 °C ± 3 °C), ±(% of output + offset)

±1 μA 0.085% + 0.85 nA 100 pA

±10 μA 0.085% + 8.5 nA 1 nA

±100 μA 0.075% + 75 nA 10 nA

±1 mA 0.075% + 750 nA 100 nA

±10 mA 0.075% + 7.5 μA 1 μA

±120 mA 0.1% + 100 μA 20 μA

Voltage readback

12 months (over USB with respect to the actual output at 25 °C ± 3 °C),

±(% of output + offset)

±2 V 0.075% + 1.5 mV 0.1 mV

±20 V 0.05% + 10 mV 1 mV

Current readback

12 months (over USB with respect to the actual output at 25 °C ± 3 °C),

±(% of output + offset)

±1 μA 0.085% + 0.85 nA 100 pA

±10 μA 0.085% + 8.5 nA 1 nA

±100 μA 0.075% + 75 nA 10 nA

±1 mA 0.075% + 750 nA 100 nA

±10 mA 0.075% + 7.5 μA 1 μA

±120 mA 0.1% + 100 μA 20 μA

1. Accuracy measurements are based on NPLC 10.

Product Specifications (continued)

Performance characteristics

Rise/fall time (ms)1U2722A U2723A

For resistive measurement2

±1 μA 170.0 15.0

±10 μA 18.0 5.0

±100 μA 6.0 1.0

±1 mA 1.0 1.0

±10 mA 1.0 1.0

±120 mA 1.0 1.0

Remote sense operating range Ensure that the maximum voltage between the OUTPUT+ and SENSE+,

OUTPUT–, and SENSE– does not exceed 3 V

Temperature coefficient Maximum change in output/readback per °C after a 30-minute warm-up is 0.15

Guard output resistance 0.2 kΩ

Noise 10 Hz to 20 MHz (peak-peak) 100 mV typical into a resistive load (floating mode)

Output voltage overshoot, ±(% of output + offset)2During turn-on or turn-off, the output plus overshoot < 0.1% + 10 mV

Programming language SCPI (Standard Commands for Programmable Instruments)

Maximum sense lead resistance 1 MΩ for rated accuracy

Voltage line regulation 0.01% of range

Voltage load regulation 0.01% + 100 μV

Current line regulation 0.04% of range

Current load regulation 0.04% + 100 μA

Recommended calibration interval One year

Maximum input capacitance load 10 nF

1. Drive 50% of 1 V or 10 V output with a resistive load. Rise time is from 10% to 90% of program voltage change at maximum current.

Fall time is from 90% to 10% of program voltage change at maximum current.

2. Measurements obtained are per default bandwidth setting.

NOTE

• All channels are isolated from the ground and from each other. Isolation is +60 VDC, Category 1.

• All specifications are based on a three-hour warm-up time.

• The measurement accuracy value is x ( 1 + a * y ), where,

◦ x = accuracy specification at room temperature,

◦ a = temperature coefficient, and

◦ y = temperature change from room temperature in °C

Noise 10 Hz to 20 MHz (Peak-peak)

Voltage range

Current range

1 μA 10 μA 100 μA 1 mA 10 mA 120 mA

2 V 50 mV 50 mV 50 mV 50 mV 30 mV 30 mV

20 V 50 mV 50 mV 50 mV 50 mV 30 mV 30 mV

Agilent Measurement Manager

The Agilent Measurement Manager

(AMM) is an application data

viewer software that comes with the

standard purchase of the U2700A

Series USB modular instruments. This

software is designed to help you per-

form quick device configuration, data

logging and data acquisition using the

products.

Supported features found in the

U2722A/U2723A USB modular source

unit:

• Command logger to allow the

capture of configuration commands

that can be easily converted to

snippets of VEE, VB, C++ and C#

code

• Self-test

• Self-calibration

• Option to save the current

instrument configuration to a file

• Data logging and export feature to

CSV, HTML and text only format

files that can be printed

• Trigger settings between modules

in the instrument chassis with Star

trigger and Master/Slave trigger

Agilent Measurement Manager prerequisites

Prior to installing the Agilent Measurement Manager software, ensure that

your PC meets the following minimum system requirements for installation and

operation.

Hardware requirements

Processor 1.6 GHz Pentium IV or higher

Operating system One of the following Microsoft Windows versions:

• Windows XP Professional or Home edition (Service Pack 1

or later)

• Windows Vista 32-bit (Business, Ultimate, Enterprise, Home

Basic and Home Premium edition)

• Windows 7 32-bit (Home Basic, Home Premium,

Professional, Enterprise and Ultimate edition)

Hard disk space 1 GB

RAM 512 MB or higher recommended

Video Super VGA (800 x 600), 256 colors or more

Software requirements

Agilent IO Libraries Suite 15.1 and above1

Agilent T&M Toolkit Runtime version 2.12

Agilent T&M Toolkit Redistributable Package 2.1 patch2

Microsoft .NET Framework version 2.02

1. Available on the Agilent Automation-Ready CD-ROM

2. Bundled with Agilent Measurement Manager software application installer

U2942A Parametric Measurement Manager Pro Software

Measure and analyze with ease

Agilent Parametric Measurement

Manager Pro (PMM Pro) is a

VEE-based software designed to

perform basic semiconductor testing.

The software specializes in the analy-

sis of discrete semiconductor devices

such as diodes, bipolar junction

transistors and field effect transistors.

Designed for use with the Agilent

U2722A/U2723A USB source mea-

sure unit and the U2941A parametric

test fixture, Agilent PMM Pro controls

the instruments to take parametric

measurements such as voltage or

current. The software then plots,

displays and logs the results in an IV

curve.

Agilent PMM Pro allows users to

carry out measurements and display

results without the need for prior pro-

gramming experience. The software

operates through an intuitive user-

interface that is easy to understand

and configure, and includes test

sequence automation to further ease

your task.

Features

• Uses an intuitive GUI that is easy to configure and simplifies testing

• Comes with predefined test profiles for diode, bipolar junction transistors and

field effect transistors, removing the need for programming experience

• Allows users to define and configure test profiles

• Automates test sequencing for parametric analysis

• Plots, displays and logs parametric measurements in an IV curve

• Includes built-in math functions such as addition, subtraction and division for

quick analysis of results

Figure 1. Intuitive GUI that features both pre-defined and user-defined test profile.

Figure 2. Plots, displays and logs parametric measurements in

an IV curve.

U2942A Parametric Measurement Manager Pro Software (continued)

Minimum system requirements for PMM Pro

System requirements

Operating system Microsoft Windows XP SP3 or higher • Microsoft Windows 7 (Professional, Ultimate, Enterprise)

• Microsoft Windows Vista®SP1 (Business, Ultimate,

Enterprise) or higher

Architecture x86 (32-bit), 64-bit for Windows 7 supportability1

Prerequisite • Agilent IO Libraries Suite 15.0 or higher2

• Agilent VEE Pro 9.0 or higher (Runtime version)3

• Microsoft.NET Framework version 1.1 and 2.03

Processor • 450 MHz Pentium II or higher required

• 800 MHz recommended

1 GHz required, 2 GHz recommended

Available memory • 128 MB minimum

• 256 MB or higher recommended

1 GB minimum, 2 GB recommended

Available disk space 1 GB hard disk free space

Video Super VGA (800x600) display or higher

resolution monitor with 256 colors or more

Support for DirectX 9 graphics with 128 MB graphics

memory recommended (Super VGA graphics is supported)

Browser Microsoft Internet Explorer 6.0 or higher Microsoft Internet Explorer 7 or higher

1. 32-bit application running on WOW64 (Windows-on-Windows) emulator.

2. Available on the Agilent Automation-Ready CD-ROM.

3. Bundled with the Agilent SMU PMM Pro software installer.

U2941A Parametric Test Fixture

Increase your parametric test

efficiency and usability

The Agilent U2941A parametric test

fixture is designed to complement

usage of the Agilent U2722A/U2723A

USB modular source measure unit in

the testing of semiconductor com-

ponents, including SMT and DIP ICs.

The U2941A comes with three input

channels, a common ground, and five

types of socket modules of various

pin configurations.

The bundled Agilent Parametric

Measurement Manager (PMM)

software also supports the Agilent

U2751A USB modular switch matrix

when used with the U2722A. The

PMM software allows for out-of-box

configuration of instruments for easy

set-up, simplifying discrete package

component testing and enabling data

recording.

Figure 3. Sample setup of the U2941A connected directly to the U2722A source measure

unit and fastened with the DIP socket module.

Black plastic fasteners

Socket modules

Figure 4. Socket modules are interchangeable to match pin configuration of

device-under-test (DUT).

Features

• Closed lid minimizes ESD on sensitive circuits and components

• Up to 3 source/measure channels supported

• Different socket modules to match a wide variety of pin configurations

• Assembly PTFE plate for low-current measurements

• Comes with the Agilent Parametric Measurement Manager software

Specifications and System Requirements

The following specifications are valid for 23 °C ±5 °C and < 70% relative humidity.

Specifications

Electrical specifications Electrical specifications

Voltage rating 60 VDC

Current rating 1 A

Environmental specifications

Operating temperature 0 °C to 50 °C

Storage temperature –20 °C to 70 °C

Operating humidity 20% to 85% RH non-condensing

Storage humidity 5% to 90% RH non-condensing

Altitude Up to 2000 m

Physical specifications

Dimensions (W×D×H) 250 mm × 200 mm × 120 mm

Weight 1.33 kg (approximate)

Warranty 3 months

Minimum system requirements

Hardware

Processor 1.6 GHz Pentium IV or higher

RAM 512 MB (1.0 GB or higher recommended)

Hard disk space 1 GB free disk space at runtime

Display resolution 1024 × 768 recommended

Operating system and browser

Operating system • Windows XP Professional or Home Edition, Service Pack 1 or later; or

• Windows 2000 Professional, Service Pack 4 or later

Browser Microsoft Internet Explorer 5.01 (6.0 or higher recommended)

Software

Agilent IO Libraries Suite1Version 15.0 or higher

Agilent VEE2Runtime version 8.5, patch 8.5.1

Agilent Measurement Manager3Version 1.6 or higher

Microsoft .NET Framework1Version 1.1 and 2.0

1. Available on Agilent Automation-Ready CD

2. Bundled with Agilent Parametric Measurement Manager CD

3. Bundled with Agilent U2722A USB modular source measure unit or Agilent U2751A USB modular switch matrix

Top view Front view

250 mm

200 mm

53 mm

120 mm

Andere Handbücher für U2722A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Agilent Technologies Messgerät Handbücher

Agilent Technologies

Agilent Technologies E4419B Bedienungsanleitung

Agilent Technologies

Agilent Technologies M9302A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent 4396B Bedienungsanleitung

Agilent Technologies

Agilent Technologies U3051C Betriebsanleitung

Agilent Technologies

Agilent Technologies 8560 E-Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies E8364BPNA Series Kurzanleitung

Agilent Technologies

Agilent Technologies 8510XF Service-Handbuch

Agilent Technologies

Agilent Technologies X Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies E4406A VSA Series Handbuch

Agilent Technologies

Agilent Technologies 4395A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8753ES Bedienungsanleitung

Agilent Technologies

Agilent Technologies 490 Micro GC Bedienungsanleitung

Agilent Technologies

Agilent Technologies E5071C Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8753ET Bedienungsanleitung

Agilent Technologies

Agilent Technologies E5072A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 4155C Installationshandbuch

Agilent Technologies

Agilent Technologies Agilent 8163A Bedienungsanleitung

Agilent Technologies

Agilent Technologies N8262A P Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies N5230C Bedienungsanleitung

Agilent Technologies

Agilent Technologies 8712ET Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1401B Bedienungsanleitung

Agilent Technologies

Agilent Technologies 16800 Series Datenblatt

Agilent Technologies

Agilent Technologies E4440A Kurzanleitung

Agilent Technologies

Agilent Technologies 10400B Series Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung