Agilent Technologies 34410A Bedienungsanleitung

Agilent 34410A and 34411A Multimeters

Data Sheet

Agilent 34410A 61/

2-Digit

High-Performance DMM

• 10,000 readings/s @ 5 1/

2-digits

direct to PC

• 1,000 readings/s @ 6 1/

2-digits

direct to PC

• 30 PPM 1-year Basic DC accuracy

• LAN, USB & GPIB standard

• DCV, ACV, DCI, ACI, 2-wire and

4-wire Resistance, Frequency,

Period, Continuity, and Diode Test

• Capacitance & Temperature

measurements

• Expanded measurement ranges

• Data logger with 50 k reading

non-volatile memory

Agilent 34411A 61/

2-Digit

Enhanced-Performance DMM

All the features of the 34410A, plus:

• 50,000 readings/s @ 41/

2-digits

direct to PC

• 1 million volatile reading memory

• Analog level triggering

• Programmable Pre/Post triggering

The Best Just Got Better

The Agilent 34410A and 34411A

61/

2-Digit DMMs represent the lat-

est generation of multimeters from

Agilent Technologies. Building on the

phenomenal success of the industry-

standard Agilent 34401A, these new

meters offer improved accuracy,

expanded measurement capability,

dramatically improved measurement

speed and throughput, and modern

computer interfaces including LAN

and USB. The dual display offers

both dual measurement capabilities

and ease of use when setting up and

configuring the DMM. Improvements

have been made in every facet of the

34401A to make the best even bet-

ter, whether you use it on the bench

or in a system.

Dramatic Speed Improvements

Whether it’s raw reading speed or

fast system throughput, the 34410A

sets a new benchmark in perfor-

mance. Using a new A/D technology,

the 34410A achieves an impressive

10,000 readings a second at 51/

2-dig-

its, and can stream readings to

your computer at this same speed!

Triggering is fast and precise, with

both trigger latency and trigger jit-

ter less than 1 µs, while bus query

response is less than 500 µs. ACV

measurements are faster as well

thanks to a digital measurement

technique that additionally improves

accuracy at high and low frequen-

cies. For even greater reading speeds,

select the 34411A, which achieves

50,000 readings a second at 41/

2-dig-

its.

Enhanced Measurement Performance

The 34410A and 34411A offer

Temperature and Capacitance

capabilities, in addition to those mea-

surements you have come to expect,

such as DCV, ACV, DCI, ACI, 2-wire

and 4-wire Resistance, Frequency,

Period, Continuity and Diode Test.

You also get Offset Compensated

Ohms, allowing you to accurately

measure resistance in the presence of

voltages. Measurement ranges have

been expanded as well; for example,

DC and AC Current Ranges now go

down to 100 µA, resulting in 100

pA resolution. Real-time math and

statistics are included, and a peak-

detect capability allows you to cap-

ture peaks as short as 20 µs.

See Agilent's Truevolt Series of DMMs

• Display DMM results in ways you never have before

• Measure with unquestioned Truevolt confidence

• Move to the next generation 34401A DMM with 100% assurance

www.agilent.com/find/dmm

Even Greater Performance

with the 34411A

The 34411A has all the features

of the 34410A, plus additional

performance that makes it even

more powerful. With the ability to

make 50,000 readings per second at

41/

2-digits, Analog Level Triggering,

programmable Pre- and Post-Trigger

and 1 million readings of volatile

memory in addition to 50,000

reading of non-volatile memory,

you now have the ability to cap-

ture low-frequency waveforms,

characterize device performance

and transfer results for analysis on

your computer.

Data Logger Function

A front panel data logger function

allows you to set the meter up to

make unattended, paced measure-

ments over a fixed time or number

of events, then pull up the results

later for review or transfer to a

computer for analysis. Set the

meter up to take measurements

every 10 seconds for an hour, go

have lunch, and check the results

upon your return. The contextual

front panel sequences make setup

and read back a breeze.

Improved Ease of Use

From the inclusion of a second

display to configuring setups for

each of the measurement functions,

these new DMMs offer significant

improvements in usability. Simple

things are simple; more complicated

setups are easier than ever. There

is even a new probe set designed

to more easily probe today’s fine-

pitch components. Finally, there is

a built-in Graphical Web Interface

that allows you to interactively

control the DMM without the

hassle of programming at all!

Modern I/O for Improved Connectivity

When connecting to a computer,

select LAN, USB or GPIB inter-

faces; all three are standard on the

34410A and 34411A. Concerned

about the viability of your existing

software programs? These new DMMs

respond to Standard Commands

for Programmable Instrumentation

(SCPI), and there is even a 34401A

Emulation Mode to ensure the

easiest upgrade possible. Agilent’s

I/O Library Suite ships with the

34410A and 34411A to help you

quickly establish an error-free

connection between your PC and

instrument. It provides robust

instrument control and works

with the software development

environment you choose.

LXI – Class C

LAN Extensions for Instruments (LXI)

provides the next generation I/O

for system applications requiring

the highest throughput. Transfer

rates of over 250,000 readings/s are

attainable ensuring even the most

data intensive measurements are

fast, without the overhead cost

of an instrument cardcage. Both

the 34410A and the 34411A are

LXI – Class C compliant.

Built To Last

Our new DMMs were designed

to high standards of ruggedness

and reliability. From the robust

package with its shock absorbing

bumpers to careful selection of

components and conservative

circuit design, these meters are

built to last. Calculated Mean

Time Between Failure (MTBF) is in

excess of 100,000 hours. Backed by

a 1-year warranty and a worldwide

network of service centers, you can

buy with confidence.

Go to the Web

For the latest information on

these or other Agilent DMMs,

go to www.agilent.com/find/dmm

Accessories Included:

• Test Lead Kit with probes

and SMT attachments.

• Test report, power cord,

and USB interface cable.

Product Reference CD-ROM with

soft documentation and software:

• Programmer’s Reference Help

• Quick Start Tutorial

• User’s Guide

• Service Guide

• Programming Examples

• IntuiLink for Multimeters

• LabVIEW and IVI-COM drivers

Optional Printed Documentation:

• Quick Start Tutorial

• User’s Guide

• Service Guide

Bench Dimensions:

System Dimensions:

261.2 mm

103.8 mm

88.3 mm

303.2 mm

212.8 mm

272.3 mm

Accuracy Specifications ± (% of reading + % of range)1

Function Range3Frequency, 24 Hour2 90 Day 1 Year

Temperature

Coefficient/°C

Test Current or Tcal ± 1 °C Tcal ± 5 °C Tcal ± 5 °C 0 °C to (Tcal -5 °C)

Burden Voltage (Tcal +5 °C) to 55 °C

DC Voltage 100.0000 mV 0.0030 + 0.0030 0.0040 + 0.0035 0.0050 + 0.0035 0.0005 + 0.0005

1.000000 V 0.0020 + 0.0006 0.0030 + 0.0007 0.0035 + 0.0007 0.0005 + 0.0001

10.00000 V 0.0015 + 0.0004 0.0020 + 0.0005 0.0030 + 0.0005 0.0005 + 0.0001

100.0000 V 0.0020 + 0.0006 0.0035 + 0.0006 0.0040 + 0.0006 0.0005 + 0.0001

1000.000 V40.0020 + 0.0006 0.0035 + 0.0006 0.0040 + 0.0006 0.0005 + 0.0001

True RMS 100.0000 mV 3 Hz – 5 Hz 0.50 + 0.02 0.50 + 0.03 0.50 + 0.03 0.010 + 0.003

AC Voltage5to 750.000 V 5 Hz – 10 Hz 0.10 + 0.02 0.10 + 0.03 0.10 + 0.03 0.008 + 0.003

10 Hz – 20 kHz 0.02 + 0.02 0.05 + 0.03 0.06 + 0.03 0.005 + 0.003

20 kHz – 50 kHz 0.05 + 0.04 0.09 + 0.05 0.10 + 0.05 0.010 + 0.005

50 kHz – 100 kHz 0.20 + 0.08 0.30 + 0.08 0.40 + 0.08 0.020 + 0.008

100 kHz – 300 kHz 1.00 + 0.50 1.20 + 0.50 1.20 + 0.50 0.120 + 0.020

Resistance6100.0000

Ω

1 mA 0.0030 + 0.0030 0.008 + 0.004 0.010 + 0.004 0.0006 + 0.0005

1.000000 k

Ω

1 mA 0.0020 + 0.0005 0.007 + 0.001 0.010 + 0.001 0.0006 + 0.0001

10.00000 k

Ω

100 µA 0.0020 + 0.0005 0.007 + 0.001 0.010 + 0.001 0.0006 + 0.0001

100.0000 k

Ω

10 µA 0.0020 + 0.0005 0.007 + 0.001 0.010 + 0.001 0.0006 + 0.0001

1.000000 M

Ω

5 µA 0.0020 + 0.0010 0.010 + 0.001 0.012 + 0.001 0.0010 + 0.0002

10.00000 M

Ω

500 nA 0.0100 + 0.0010 0.030 + 0.001 0.040 + 0.001 0.0030 + 0.0004

100.0000 M

Ω

500 nA || 10 M

Ω

0.200 + 0.001 0.600 + 0.001 0.800 + 0.001 0.1000 + 0.0001

1.000000 G

Ω

500 nA || 10 M

Ω

2.000 + 0.001 6.000 + 0.001 8.000 + 0.001 1.0000 + 0.0001

DC Current 100.0000 µA < 0.03V 0.010 + 0.020 0.040 + 0.025 0.050 + 0.025 0.0020 + 0.0030

1.000000 mA < 0.3 V 0.007 + 0.006 0.030 + 0.006 0.050 + 0.006 0.0020 + 0.0005

10.00000 mA < 0.03V 0.007 + 0.020 0.030 + 0.020 0.050 + 0.020 0.0020 + 0.0020

100.0000 mA < 0.3 V 0.010 + 0.004 0.030 + 0.005 0.050 + 0.005 0.0020 + 0.0005

1.000000 A < 0.8 V 0.050 + 0.006 0.080 + 0.010 0.100 + 0.010 0.0050 + 0.0010

3.000000 A < 2.0 V 0.100 + 0.020 0.120 + 0.020 0.150 + 0.020 0.0050 + 0.0020

True RMS 100.0000 µA to 3 Hz – 5 kHz 0.10 + 0.04 0.10 + 0.04 0.10 + 0.04 0.015 + 0.006

AC Current73.00000 A 5 kHz – 10 kHz 0.20 + 0.04 0.20 + 0.04 0.20 + 0.04 0.030 + 0.006

Frequency 100 mV to 3 Hz – 5 Hz 0.070 + 0.000 0.070 + 0.000 0.070 + 0.000 0.005 + 0.000

or Period 750 V 5 Hz – 10 Hz 0.040 + 0.000 0.040 + 0.000 0.040 + 0.000 0.005 + 0.000

10 Hz – 40 Hz 0.020 + 0.000 0.020 + 0.000 0.020 + 0.000 0.001 + 0.000

40 Hz – 300 kHz 0.005 + 0.000 0.006 + 0.000 0.007 + 0.000 0.001 + 0.000

Capacitance81.0000 nF 500 nA 0.50 + 0.50 0.50 + 0.50 0.50 + 0.50 0.05 + 0.05

10.000 nF 1 µA 0.40 + 0.10 0.40 + 0.10 0.40 + 0.10 0.05 + 0.01

100.00 nF 10 µA 0.40 + 0.10 0.40 + 0.10 0.40 + 0.10 0.01 + 0.01

1.0000 µF 10 µA 0.40 + 0.10 0.40 + 0.10 0.40 + 0.10 0.01 + 0.01

10.000 µF 100 µA 0.40 + 0.10 0.40 + 0.10 0.40 + 0.10 0.01 + 0.01

Temperature9

RTD

-200 °C to 600 °C 0.06 °C 0.06 °C 0.06 °C 0.003 °C

Thermistor -80 °C to 150 °C 0.08 °C 0.08 °C 0.08 °C 0.002 °C

Continuity 1000.0

Ω

1 mA 0.002 + 0.010 0.008 + 0.020 0.010 + 0.020 0.0010 + 0.0020

Diode Test10 1.0000 V 1 mA 0.002 + 0.010 0.008 + 0.020 0.010 + 0.020 0.0010 + 0.0020

1Specifications are for 90 minute warm-up and 100 PLC.

2Relative to calibration standards.

320% overrange on all ranges, except DCV 1000 V, ACV 750 V, DCI and ACI 3 A ranges.

4For each additional volt over ± 500 V add 0.02 mV of error.

5Specifications are for sinewave input > 0.3% of range and > 1 mVrms. Add 30 µV error for frequencies below 1 kHz.

750 VAC range limited to 8 x 107Volts-Hz. For each additional volt over 300 Vrms add 0.7 mVrms of error.

6Specifications are for 4-wire resistance measurements, or 2-wire using Math Null.

Without Math Null, add 0.2

Ω

additional error in 2-wire resistance measurements.

7Specifications are for sinewave input > 1% of range and > 10 µArms. Frequencies > 5 kHz are typical

for all ranges. For the 3 A range (all frequencies) add 0.05% of reading + 0.02% of range to listed specifications.

8Specifications are for 1-hour warm-up using Math Null. Additional errors may occur for non-film capacitors.

9For total measurement accuracy, add temperature probe error.

10 Accuracy specifications are for the voltage measured at the input terminals only. 1 mA test current is typical.

Variation in the current source will create some variation in the voltage drop across a diode junction.

A-to-D Converter Noise Performance

Integration Time Resolution Normal Mode Readings/Second4

(NPLC) (ppm of range)1Rejection (dB)2

0.001530 0 50,000

0.002515 0 25,000

0.006 6 0 10,000

0.02 3 0 3,000

0.06 1.5 0 1,000

0.2 0.7 0 300

1 0.3 55 60 (50)

2 0.2 110330 (25)

10 0.1 11036 (5)

100 0.03 11030.6 (0.5)

1Resolution is defined as the typical DCV 10 V range RMS noise.

Auto-zero on for NPLC

≥

1. See manual for additional noise characteristics.

2Normal mode rejection for power line frequency ± 0.1%.

3For power-line frequency ± 1% 75 dB and for ± 3% 55 dB.

4Maximum rate with auto-zero off for 60 Hz and (50 Hz) operation.

5Only available for the 34411A.

System Reading and Throughput Rates

DMM memory to PC (Maximum reading rate out of memory)1

Drawing – Path B

Reading GPIB USB 2.0 LAN (VXI-11) LAN (Sockets)

Format Readings/s Readings/s Readings/s Readings/s

ASCII 4,000 8,500 7,000 8,500

32-bit Binary 89,000 265,000 110,000 270,000

64-bit Binary 47,000 154,000 60,000 160,000

Direct I/O Measurements (Single reading – measure and I/O time)1

Maximum Reading

Drawing – Path C

Rate into Memory

Function

Resolution GPIB USB 2.0

LAN

or to Direct I/O

(NPLC)

(VXI-11)

(Sockets)

(Readings/s)

ms ms

Drawing – Path A or C

DCV/2-wire 0.006 (0.001) 2.6 2.9 4.6 3.2 10,000 (50,000)

Resistance

ACV/ Fast Filter 10.0 10.0 10.0 10.0 500

Frequency 1 ms Gate

11/2 scale input signal, immediate trigger, trigger delay 0, auto-zero off, auto-range off, no math, null off,

60 Hz line frequency. Specifications are for 34410A or (34411A). See manual for performance on other functions.

System Performance

Function Range Auto- Maximum Maximum Internal

Change (ms)1Change

(ms)2

range (ms)3External Trigger Rate4

LAN/GPIB

Trigger Rate

DCV/2-wire 22 3.9/2.6 7.5 5,000/s 10,000/s

Resistance (50,000/s)

ACV/ 37 6.5/6.4 19 500/s 500/s

Frequency

1 Time to change from 2-wire Resistance to this specified function,

or DCV to 2-wire Resistance using the SCPI “FUNC” command.

2Time to change from one range to the next higher range, ≤ 10 V, ≤ 10 MΩ.

3Time to automatically change one range and be ready for the new measurement, ≤ 10 V, ≤ 10 MΩ.

4Specifications are for 34410A or (34411A).

100

0.1

0.01

0.001 0.01 0.1 1 10 100

RMS Noise (ppm of range)

Integration Time (NPLC)

System Reading Architecture

DC Voltage

Measurement Method:

Continuously integrating

multi-slope IV A/D converter

Linearity: 0.0002% of reading

(10 V range) + 0.0001% of range

Input Resistance:

0.1 V, 1 V, 10 V 10 MΩ or > 10 GΩ

Ranges (Selectable)

100 V, 1000 V 10 MΩ ± 1%

Ranges (Fixed)

Input Bias Current:

< 50 pA at 25 °C

Input Protection: 1000 V

DC CMRR: 140 dB1

True RMS AC Voltage

Measurement Method:

AC-coupled True RMS measurement.

Digital sampling with anti-alias filter.

Crest Factor:

No additional error for crest factors < 10.

Limited by peak input and 300 kHz bandwidth.

Peak Input:

300% of range or 1100 V

Overload Ranging:

Will select higher range if peak input

overload is detected during auto range.

Overload is reported in manual ranging.

AC CMR: 70 dB2

Maximum Input: 400 Vdc, 1100 Vpk

Input Impedance:

1 MΩ ± 2% in parallel with < 150 pF

Input Protection:

750 Vrms all ranges

Resistance

Measurement Method:

Selectable 2-wire or 4-wire.

Current source referenced to LO input.

Offset Compensation:

Selectable on the 100 Ω, 1 kΩ,

and 10 kΩ ranges

Max. Lead Resistance (4-wire):

10% of range per lead for 100

Ω

, 1 k

Ω

1 kΩ per lead on all other ranges

Input Protection:

1000 V on all ranges

DC Current

Current Shunt:

200 Ω for 100 µA, 1 mA

2 Ω for 10 mA, 100 mA

0.1 Ω for 1 A, 3 A

Input Protection: 3 A, 250 V fuse

Measurement Characteristics

1For 1 kΩ unbalanced in LO lead, ± 500 V peak maximum

2For 1 kΩ unbalanced in LO lead and < 60 Hz, ± 500 V peak maximum

3Maximum rate for DCV, DCI, and resistance functions

(using zero settling delay, autozero off, manual range)

434411A only

True RMS AC Current

Measurement Method:

AC-coupled True RMS measurement.

Directly coupled to the fuse and shunt.

Digital sampling with anti-alias filter.

Current Shunt:

200 Ω for 100 µA, 1 mA

2 Ω for 10 mA, 100 mA

0.1 Ω for 1 A, 3 A

Maximum Input:

The peak value of the DC + AC current must

be < 300% of range. The RMS current must be

< 3 A including the DC current content.

Input Protection: 3 A, 250 V fuse

Frequency and Period

Measurement Method:

Reciprocal-counting technique. AC-coupled input

using the AC voltage measurement function.

Input Impedance:

1 MΩ ± 2% in parallel with < 150 pF

Input Protection: 750 Vrms all ranges

Capacitance

Measurement Method:

Current input with measurement of

resulting ramp.

Connection Type: 2-wire

Temperature

Thermistor:

2.2 kΩ, 5 kΩ, and 10 kΩ

RTD: α = 0.00385

Rofrom 49 Ω to 2.1 kΩ

Continuity/Diode Test

Response Time:

300 samples/sec with audible tone

Continuity Threshold: Fixed at 10 Ω

Operating Characteristics

Maximum readings/second

Digits

Function34.5 5.5 6.5

DCV 50 k410 k 1 k

2-wire

Ω

50 k410 k 1 k

DCI 50 k410 k 1 k

Frequency 500 90 10

Period 500 90 10

Filter setting fast med slow

ACV 500 150 50

ACI 500 150 50

Additional 34411A Specifications

Resolution: See table on page 4

Overall Bandwidth, DCV & DCI:

15 kHz typical @ 20 µs aperture (-3 dB)

Triggering: Pre/Post, Int/Ext, Pos/Neg

Timebase Resolution: 19.9524 µs 0.01% accuracy

Trigger Jitter:

2 µs (p-p), 20 µs (p-p) when pre-triggered

Spurious-Free Dynamic Range

& Signal to Noise Distortion Ratio

Function DCV Range Spur-Free SNDR

1 V -75 dB 60 dB

10 V1-70 dB 60 dB

100 V -75 dB 60 dB

110 V range: 2 V (p-p) < signal < 16 V (p-p)

Triggering and Memory

Reading Hold Sensitivity:

1% of reading

Samples per Trigger:

1 to 50,000 (34410A)

1 to 1,000,000 (34411A)

Trigger Delay: 0 to 3600 s (20 µs step size)

External Trigger:

Programmable edge, Low-power TTL compatible

Delay: < 1 µs Max rate: 5,000/s

Jitter: < 1 µs Min Pulsewidth:

1 µs

Voltmeter Complete:

3 V Logic output,

2 µs pulse with programmable edge

Nonvolatile Memory: 50,000 readings

Volatile Memory:

50,000 readings (34410A)

1,000,000 readings (34411A)

Sample Timer:

Range: 0 to 3600 s (20 µs step sizes)

Jitter: < 100 ns

General Specifications

Power Supply:

100 V/120 V/220 V/240 V ± 10%

Power Line Frequency:

45 Hz to 66 Hz and 360 Hz to 440 Hz,

Automatically sensed at power-on

Power Consumption: 25 VA peak (16 W average)

Operating Environment: Full accuracy for

0 °C to 55 °C, 80% R.H. at 40 °C non-condensing

Storage Temperature: -40 °C to 70 °C

Weight: 3.72 kg (8.2 lbs)

Safety: IEC 61010-1, EN 61010-1, UL 61010-1,

CAN/CSA-C22.2 No. 61010-1, Refer to

Declarations of Conformity for current

revisions. Measurement CAT II 300 V,

CAT I 1000 V. Pollution Degree 2

EMC: IEC 61326, EN 61326, CISPR 11, ICES-001,

AS/NZS 2064.1, Refer to Declaration of

Conformity for current revisions.

Vibration & Shock: MIL-T-28800E,

Type III, Class 5 (Sine Only)

LXI Compliance: LXI Class C, ver. 1.0

Warranty: 1 year

Ordering Information

Agilent 34410A and 34411A Multimeters

Accessories included

Test lead kit with probes and

SMT attachments, calibration

certificate, power cord, and USB

interface cable.

Product Reference CD-ROM with

soft documentation and software:

• Programmer’s Reference Help

• Quick Start Tutorial

• User’s Guide

• Service Guide

• Programming Examples

• IntuiLink for Multimeters

• LabVIEW and IVI-COM drivers

Options

Opt. A6J ANSI Z540 compliant

calibration

Probes/Leads/Clip Accessories

11059A Kelvin probe set

11060A Surface mount device (SMD) test probes

11062A Kelvin clip set

34133A Precision electronic test leads

34134A DC coupled current probe

34136A High voltage probe

34138A Test lead set

34171B Input terminal connector

(sold in pairs)

34172B Input calibration short

(sold in pairs)

34308A Thermistor kit

34330A 30 A current shunt

E2308A 5 k thermistor probe

Y1133A Low-thermal external digital multimeter scanning kit

Rack Mount Kits

34190A Rackmount kit: designed for use with only one instrument, mounted

on either the left or the right side of the rack.

34191A 2U dual flange kit: secures the instrument to the front of the rack.

This kit can be used with the 34194A dual lock link kit to mount

two half-width, 2U height instruments side-by side.

34194A Dual lock link kit: recommended for side-by-side combinations and

includes links for instruments of different depths. This kit can be

used with the 34191A 2U dual flange kit to mount two half-width,

2U height instruments side-by-side.

Other Accessories

34131A Hard transit case

34162A Accessory pouch

E5810A LAN/GPIB gateway

www.agilent.com

www.agilent.com/find/DMM

www.agilent.com/quality

www.agilent.com/find/AdvantageServices

Accurate measurements throughout the life of

your instruments.

Agilent Advantage Services

Three-Year Warranty

www.agilent.com/find/ThreeYearWarranty

Agilent’s combination of product reliability

and three-year warranty coverage is another

way we help you achieve your business goals:

increased confidence in uptime, reduced cost

of ownership and greater convenience.

For more information on Agilent

Technologies’ products, applications or

services, please contact your local Agilent

office. The complete list is available at:

www.agilent.com/find/contactus

Americas

Canada (877) 894 4414

Brazil (11) 4197 3600

Mexico 01800 5064 800

United States (800) 829 4444

Asia Paciﬁc

Australia 1 800 629 485

China 800 810 0189

Hong Kong 800 938 693

India 1 800 112 929

Japan 0120 (421) 345

Korea 080 769 0800

Malaysia 1 800 888 848

Singapore 1 800 375 8100

Taiwan 0800 047 866

Other AP Countries (65) 375 8100

Europe & Middle East

Belgium 32 (0) 2 404 93 40

Denmark 45 45 80 12 15

Finland 358 (0) 10 855 2100

France 0825 010 700*

*0.125 €/minute

Germany

49 (0) 7031 464 6333

Ireland 1890 924 204

Israel 972-3-9288-504/544

Italy 39 02 92 60 8484

Netherlands 31 (0) 20 547 2111

Spain 34 (91) 631 3300

Sweden 0200-88 22 55

United Kingdom 44 (0) 118 927 6201

For other unlisted countries:

www.agilent.com/find/contactus

(BP-3-1-13)

Product specifications and descriptions

in this document subject to change

without notice.

Published in USA, April 2, 2013

5989-3738EN

www.lxistandard.org

LAN eXtensions for Instruments puts

the power of Ethernet and the Web

inside your test systems. Agilent

is a founding member of the LXI

consortium.

Agilent Channel Partners

www.agilent.com/find/channelpartners

Get the best of both worlds: Agilent’s

measurement expertise and product

breadth, combined with channel

partner convenience.

www.pxisa.org

PCI eXtensions for Instrumentation

(PXI) modular instrumentation

delivers a rugged, PC-based high-per-

formance measurement and automa-

tion system.

www.axiestandard.org

AdvancedTCA®Extensions for In-

strumentation and Test (AXIe) is

an open standard that extends the

AdvancedTCA for general purpose

and semiconductor test. Agilent

is a founding member of the AXIe

consortium.

www.agilent.com/find/myagilent

A personalized view into the information

most relevant to you.

myAgilent

Andere Handbücher für 34410A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Agilent Technologies Multimeter Handbücher

Agilent Technologies

Agilent Technologies Agilent 8163A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent 8163A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1231A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34450A 5 Digit Multimeter Bedienungsanleitung

Agilent Technologies

Agilent Technologies U3402A Handbuch

Agilent Technologies

Agilent Technologies 34450A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U2741A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 3458A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1251A Handbuch

Agilent Technologies

Agilent Technologies U1273A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U3402A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U3606B Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34420A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 3458A Gebrauchs- und Pflegehandbuch

Agilent Technologies

Agilent Technologies U1251A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1401A Bedienungsanleitung

Agilent Technologies

Agilent Technologies 34450A Montage- und Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1253B Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1231A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1270 Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1251A Bedienungsanleitung

Agilent Technologies

Agilent Technologies Agilent E1412A Bedienungsanleitung

Agilent Technologies

Agilent Technologies U1253A Handbuch

Agilent Technologies

Agilent Technologies 34405A Bedienungsanleitung

Beliebte Multimeter Handbücher anderer Marken

Fluke

Fluke 83 Bedienungsanleitung

Hameg

Hameg HM 8012 Bedienungsanleitung

Mastech

Mastech MY70 Bedienungsanleitung

Steren

Steren MUL-300 Bedienungsanleitung

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Bedienungsanleitung

PeakTech

PeakTech 4000 Gebrauchs- und Pflegehandbuch

YOKOGAWA

YOKOGAWA 90050B Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Bedienungsanleitung

Fluke

Fluke 8846A Bedienungs- und Wartungshandbuch

Tempo Communications

Tempo Communications MM200 Bedienungsanleitung

Elenco Electronics

Elenco Electronics CM-1555 Bedienungsanleitung

Mastech

Mastech MS8238C Bedienungsanleitung

SDAR

SDAR 830A, 830B, 830D, 830C Bedienungsanleitung

RS PRO

RS PRO RS-9519BT Bedienungsanleitung

BGS technic

BGS technic 8890 Bedienungsanleitung

Amprobe

Amprobe Hexagon 60 Bedienungsanleitung

Morris

Morris 57074 Bedienungsanleitung