AlienDVR DSD105 Bedienungsanleitung

The new Alien Digital Video Recorder

Operations Manual

Model DSD105

Version 2.0

4 Channel Real Time DVR

Networkable

Mobile Phone Monitoring

Table of Contents Page

Welcome 4

Important Safeguards and Warnings 4

1. Features 5

Local functions 5

2. Installation 6

2.1 Checking the DVR and its Accessories 6

2.2 HDD Installation 6

2.3 Rear Panel Description 7

2.4 External Alarm In/Out 8

3. Operational Instructions 9

3.1 Front Panel 9

3.2 IR Controller 11

3.3 Menu Description 13

3.3.1 Menu Items 13

3.3.2 Menu Operation 14

4. Basic Operation Guide 15

4.1 Username and Password 15

4.2 PTZ Control 17

4.3 Manual Record 19

4.4 Playback 20

4.5 Backup Recorded Files 22

4.6 Shutdown DVR 24

5. Parameter Setup Guide 25

5.1 Administrator and Password 25

5.2 Add and Delete User 26

5.3 Device ID 29

5.4 Video Output Standard 30

5.5 OSD Setup 30

5.6 Camera Input Adjustment –Camera Settings 32

5.7 Camera Input Adjustment –Mask Area Setup 32

5.8 View Tampering Alarm 33

5.9 Video Loss Alarm 34

5.10 Motion Detection Alarm 35

5.11 Preview Properties 37

5.12 Recording Setup 38

5.13 External Alarm Input and Relay Output 40

5.14 Network Parameters 45

5.15 PTZ 47

6. Utilities 49

6.1 Default Parameters 50

6.2 Firmware 51

6.3 Hard Disk 52

6.4 Alarm Out 53

6.5 Reboot 53

6.6 Power Off 53

6.7 View Log 53

6.8 System Information 55

7. Firmware Upgrade 56

7.1 FTP Server Setup 56

7.2 Upgrade Mode 58

8. Web HTTP Operation 59

8.1 Network Connection 59

8.1.1 Login and Logout 59

9. Networking a Digital Video Recorder 60

9.1 Configure the DVR to operate with a modem router 60

9.2 For Beginners 61

9.2.1 How do I set my PC to obtain an IP address

automatically? 62

9.2.2 How do I set my PC’s IP address Manually? 62

9.2.3 How do I find out my PC’s IP address? 62

9.2.4 How do I use Ping to test a Connection to my

DVR? 62

9.2.5 How do I configure a Router for Remote

Access? 63

9.2.6 How do I find the On-Line Support? 63

9.3 Option 1: Connect a DVR directly to a single PC 64

9.4 Option 2: Connect a DVR to a switch or hub 65

9.5 Option 3: Connecting for Internet Access 66

9.6 Network Cable Connections 67

Appendix A Hard Disk Capacity Information 68

Appendix B Recording Timetable 69

Appendix C Specifications 70

Welcome

Thank you for purchasing our DVR!

This operating manual is designed to be a reference tool for the installation and

operation of your system.

Here you can find information about this series DVR features and functions, as well

as a detailed menu tree.

Before installation and operation please read the following safeguards and warnings

carefully!

Important Safeguards and Warnings

1 Electrical Safety

The installation and operation should conform to local electrical safety codes.

2 Transportation Security

Avoid placing equipment on top of this DVR and do not subject the unit to strong

vibration or water during transportation, storage and installation.

3 Installation

Always install the unit in an upright position. Handle with due care.

Do not apply power to the DVR before completing the installation.

Do not place objects on the DVR or restrict air flow to this DVR.

4 Qualified Engineers Needed

Only entrust examination and repair work by qualified service engineers.

We are not liable for any problems caused by unauthorised modifications or attempted

repair.

5 Environment

The DVR should be installed in a cool, dry place away from direct sunlight,

inflammable, explosive substances etc.

Note: Note that the manufacturer of this product reserves the right to make

modifications to the DVR and/or these instructions without prior notice.

1 Features

The DSD105 DVR uses the embedded MCU and realtime operating system

combining the most advanced technology in the information industry. It incorporates

video and audio encoding and decoding, hard disk record and TCP/IP. The firmware

is installed in the flash drive and is very stable and reliable.

The DSD105 has both the features of a digital video recorder and a digital video

server. It works as a standalone unit or can be incorporated into a powerful

surveillance network, suitable for use in banks, telecommunication, transportation,

warehouse, clubs and public houses etc.

Compression

Supports video loop, CIF and QCIF resolution, multi area motion detection, OSD and

changeable OSD position, LOGO and changeable LOGO position.

Local functions

Record

Supports multiple record type, including realtime, manual record, motion detection,

external alarm, motion&alarm, motion/alarm.

Supports 1 SATA Hard Drive, FAT32 file system, HDD SMART technology, cycle

or non cycle record, backup of recorded files and clips.

Supports USB memory, USB HDD, USB CD-R/W, USB DVD-R/W, IDE CD-R/W

and IDE DVD-R/W.

Preview and Playback

Supports analogue monitor and VGA output, multiple preview modes, sensitive area

mask, camera alarm block, single channel playback by file or time and displays local

record status.

PTZ

Supports numerous PTZ protocols, presets, sequence and cruise.

Alarms

Supports exception alarm, motion detection alarm, external alarm etc.

Others

Supports IR control and multi-level user management.

Network

Supports TCP, UDP, RTP, Multicast for network preview and PPPoE for broadband.

Supports remote parameter setup, can send alarm information to remote centre,

network control PTZ, network record live stream, network download and play back

recorded files in DVR and remotely upgrade firmware.

2. Installation

2.1 Checking the DVR and its Accessories

When you receive the product, check that all the items are included in your package.

There is a list in the package.

2.2 HDD Installation

The DSD105 is not fitted with a Hard Drive unless purchased separately. The size of

the Hard Drive can be calculated according to the total capacity required. A table is

supplied at the end of this manual.

This DVR uses one SATA Hard Drive up to a maximum of 1 Tb.

First remove DVR case top.

Fit hard drive to base plate with screws.

Connect SATA data cable correctly and then power cable. Ensure cables are fitted

tightly.

Refit DVR case top and power up unit.

Ensure HDD is formatted before use. Details can be found in this manual.

2.3 Rear Panel Description

This section provides information about the rear panel. When you install this series

DVR for the first time, please refer to this part first.

No. Function Description

1USB Port Not functional

2Video Inputs 4 Channels standard BNC

3Video Output Monitor 1 BNC Video Out

4Video Output Monitor 2 BNC Video Out

5Audio Input 1 channel RCA (1.0v p~p, 75 ohm)

6Audio Output 1 channel RCA (1.0v p~p, 75 ohm)

7LAN Interface Network connection

8VGA Interface VGA display

9Alarm Relay 1 alarm output

10 Ground Alarm ground

11 RS485 RS485 connections for PTZ telemetry control

12 Alarm In Alarm connections

13 12vDC Connection of 12vDC power supply

14 Power Switch Switch power on/off

2.4 External Alarm In/Out Connection

Alarm Input Port:

G (GND): Connect the GND sensor

1 ~ 3 : Alarm Input supporting normally open or normally closed.

Alarm Output Port:

1 ~ : Relay Output

Alarm Output Connection

Please note the usage of jumper JJ1. If you use DC, either connection is okay. It is

suggested that you use 12vDC at less than 1 Amp.

If you use AC, ensure the jumper is opened. There are jumpers on the mainboard

corresponding with each alarm output. The default is closed.

WARNING: IF YOU USE AC FOR RELAY OUTPUT, ENSURE THE

RELEVANT JUMPER IS OPENED.

3. Operational Instructions

3.1 Front Panel

No: Type Name Description

USB Port

DVD Writer

Function Keys

USB Port

DVD Writer

1/MENU

2ABC

3DEF

4GHI/ESC

5JKL/EDIT

6MNO/PLAY

7PQRS/REC

8TUV/PTZ

USB 2 Port

DVD Writer

1. Switch from preview mode to

MENU mode.

2. WIPER control

3. Press MENU for >5secs to cancel

beep sound.

2 ZOOM –in PTZ control

3 ZOOM + in PTZ control

ESC Cancel & back to previous menu

1. In edit mode delete current character

2. IRIS in PTZ control

3. Select üor xto enable or disable

1. Local playback

2. AUTO in PTZ control

1. Manual Record

2. SHOT in PTZ control (adjust preset)

1. Enter PTZ control

2. IRIS in PTZ control

654

No: Type Name Description

Function Keys

Status Lights

Control Keys

Power

9WXYZ/PREV

O/A

SHIFT

PWR

READY

STATUS

ALARM

RECORD

NETWORK

Direction Keys

ENTER

POWER

1. Multi-screen preview switch

2. Switch MENU mode to PREVIEW

FOCUS- in PTZ control

1. Input switch (number, lower case,

upper case & symbol)

2. FOCUS+ in PTZ control

3. In Preview mode, display or hide the

channel status bar.

Switch between numeric keys and

function keys

GREEN DVR working

RED DVR powered off

NO LIGHT No power supplied

DVR is ready

GREEN You can use Remote

RED Alarm detected

RED Flickering HDD in use

Network Status

1. MENU mode, use / to

select and / to edit.

2. PTZ direction.

3. Playback speed

1. Menu confirmation

2. Select üor xto enable or disable

3. Pause playback

Power button

NOTE: SHIFT button is used to switch between numeric keys and function keys

Inhaltsverzeichnis

Andere AlienDVR DVR Handbücher

AlienDVR

AlienDVR Megahero Bedienungsanleitung

Beliebte DVR Handbücher anderer Marken

FLIR

FLIR M3100E Series Bedienungsanleitung

VTRACKPRO

VTRACKPRO FPRO300 Bedienungsanleitung

Swann

Swann NVR-7085 models Bedienungsanleitung

XtendLan

XtendLan DVR-1670C Bedienungsanleitung

urmet domus

urmet domus 1093/004AHD Bedienungsanleitung

Holux

Holux M1 Bedienungsanleitung

CMOS DOTCOM

CMOS DOTCOM ANX-1670 Bedienungsanleitung

Whistler

Whistler D16VRS Bedienungsanleitung

Defender Security

Defender Security 82-20235 Bedienungsanleitung

MISUMI

MISUMI MP-WF100M Bedienungsanleitung

Speco

Speco D8HU Bedienungsanleitung

UST

UST DDR-E04AA Gebrauchsanweisung

Consolidated

Consolidated Digital Video Recorder Bedienungsanleitung

Mace

Mace DVR0404RW Kurzanleitung

RCA

RCA RTD315W Bedienungsanleitung

FSM

FSM Colibri Grande PRO Bedienungsanleitung

Hauppauge

Hauppauge HD PVR 2 Bedienungsanleitung

Identivision

Identivision ICR-PH161i PIONEER Bedienungsanleitung