Allen-Bradley 1397 Bedienungsanleitung

Installation Instructions IN

1397-5.21 July, 1997

Allen-Bradley

1397

150HP AC Line Disconnect

Cat. Nos. 1397-DS125

1397-DS150

WhatThis Option

Provides

WhereThis Option Is

Used

WhatTheseInstructions

Contain

When installed, theAC line disconnect is designed to provide branch

circuit disconnect switch requirements.

Each 150HP AC Line Disconnect is sized to a 1397 drive as detailed

below.

230V Drive Rating 460V Drive Rating

Catalog Number HP (kW) HP (kW)

1397-DS125 40-60 (30-45) 75-125 (56-93)

1397-DS150 75 (56) 150 (112)

These instructions and any accompanying instructions contain the

necessary information to install a 1397 150HP AC Line Disconnect.

1397 150HP AC Line Disconnect2

1397-5.21 July, 1997

GRD

181 182 183

Retaining

Screw

Panel

Tab

Panel

Tab

Retaining

Screw

❐

Loosenthe (2) auxiliary panel coverretaining screws.Tolift out

the auxiliary panel, loosen the screws only enough to allow the

panel tabs to slide out.

❐

Removeandlockoutallincomingpowertothedrive.Disconnect

the incoming power lines from the drive by removing the wire

binding screws on the box connectors at terminals 181, 182

183.

Installation

ATTENTION:

Electric Shock can cause injury or death.

Remove all power before working on this product.

The drive is at line voltage when connected to incomingAC

power. Before proceeding with any installation or

troubleshooting activity, disconnect lockout and tag all

incomingpowerto thedrive.Verifywitha voltmeterthanno

voltage exists at terminals L1, L2 and L3 on the drive input

power terminal block.

1397 150HP AC Line Disconnect

1397-5.21 July, 1997

GRD

Hex Box

Connector Hex Box

Connector

Hex Box

Connector

❐

Remove the hex box connectors at terminals 181, 182

183.

Insert a hex wrench from the front through the holes from the

discardedwirebindingscrews,andturnthefastenersclockwise.

Usea 5/32" wrenchfor 250Adisconnects, or a7/32" wrenchfor

400A disconnects. Place your hand behind the box connectors

to catch the fasteners. Discard the box connectors.

Installation

(continued)

1397 150HP AC Line Disconnect

1397-5.21 July, 1997

OFF

SET AT "2"

LOAD SIDE

LINE SIDE

d INSERT

❐

Install the bus bars on terminals 181, 182 & 183 using the M8

fasteners with 250A kits or M10 fasteners with 400A kits.

Place the bus bar’s smaller, oval hole on the terminal.

Screw the nut to the bottom (non-socket) end of the screw.

Leave approximately 5mm (0.20 In.) of thread below the nut

on M8 fasteners, or 8mm (0.31 In.) on M10s.

Insert the set screw from the back of the terminal through the

bus bar.

Screw the nut washer to the top (hex socket end) of the set

screw. Finger tighten, making sure the back nut and the screw

do not turn.

Installation

(continued)

1397 150HP AC Line Disconnect

1397-5.21 July, 1997

GRD

Disc.

Panel

Retaining

Screw

Disc.

Panel

Retaining

Screw

Disc.

Panel

Retaining

Screw

Disc.

Panel

Tab

Screw

Disc.

Panel

Tab

Screw

Installation

(continued)

❐

Install the disconnect panel in the front of the auxiliary chassis

enclosureinplaceoftheauxiliarypanelcoverremovedinStep2.

• The (2) disconnect panel tab screws go through the holes in

the panel tabs to lock the panel in place.

• The (3) M6 disconnect panel retaining screws attach the

disconnect panel to the auxiliary chassis.

1397 150HP AC Line Disconnect

1397-5.21 July, 1997

OFF

SET AT "2"

LOAD SIDE

LINE SIDE

Installation

(continued)

❐

Mount the AC line disconnect to the disconnect panel using

the (4) M5 fasteners included with 250A kits, or the (4) M6

fasteners included with 400A kits.

Connect the bus bars installed in Step 3 to the disconnect’s

load terminals using 1/4" fasteners with 250A kits or 3/8"

fasteners with 400A kits.

Torque all fasteners on the bus bars to the following values. Use

a hex wrench and an open end wrench to tighten the M8 or M10

fasteners.

Fastener Size MaximumTorque HexWrench Size

1/4" 7.46 N-m (66 lb.-in.) —

3/8" 26.66 N-m (236lb.-in.) —

M8 11.29 N-m (100lb.-in.) 4mm

M10 22.59 N-m (200lb.-in.) 5mm

1397 150HP AC Line Disconnect

1397-5.21 July, 1997

GRD

OFF

SET AT "2"

81 82 83

Installation

(continued)

❐

Apply the label to the top front of the AC line disconnect

Connect the incoming AC power lines to the line side of the

AC line disconnect using the built-in box connectors. Torque

the screws to 28.24 N-m (250 lb.-in.) for 250A disconnects,

and 33.89 N-m (300 lb.-in.) for 400A disconnects.

Flip the line fuse cover up and press it against the hook and

loop fastener to hold it in position over the fuses.

Rockwell Automation helps its customers receive a superior return on their investment by bringing

together leading brands in industrial automation, creating a broad spectrum of easy-to-integrate

products. These are supported by local technical resources available worldwide, a global network

of system solutions providers, and the advanced technology resources of Rockwell.

Worldwide representation.

Argentina • Australia • Austria • Bahrain • Belgium • Bolivia • Brazil • Bulgaria • Canada • Chile • China, People’s Republic of • Colombia • Costa Rica • Croatia • Cyprus

Czech Republic • Denmark • Dominican Republic • Ecuador • Egypt • El Salvador • Finland • France • Germany • Ghana • Greece • Guatemala • Honduras • Hong Kong

Hungary • Iceland • India • Indonesia • Iran • Ireland • Israel • Italy • Jamaica • Japan • Jordan • Korea • Kuwait • Lebanon • Macau • Malaysia • Malta • Mexico

Morocco • The Netherlands • New Zealand • Nigeria • Norway • Oman • Pakistan • Panama • Peru • Philippines • Poland • Portugal • Puerto Rico • Qatar • Romania • Russia

Saudi Arabia • Singapore • Slovakia • Slovenia • South Africa, Republic of • Spain • Sweden • Switzerland • Taiwan • Thailand • Trinidad • Tunisia •Turkey • United Arab Emirates

United Kingdom • United States • Uruguay • Venezuela

Rockwell Automation Headquarters, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414 382-2000, Fax: (1) 414 382-4444

Publication 1397-5.21 — July, 1997 P/N 184666

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Allen-Bradley Gleichstromantrieb Handbücher

Allen-Bradley

Allen-Bradley PowerFlex 700S Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 70 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1336 IMPACT Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 6000T Bedienungsanleitung

Allen-Bradley

Allen-Bradley CX300 Bedienungsanleitung

Allen-Bradley

Allen-Bradley Kinetix 5500 Leitfaden

Allen-Bradley

Allen-Bradley PowerFlex 6000 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex SK-20P-S725804 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 20P Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex Bedienungsanleitung

Allen-Bradley

Allen-Bradley Rockwell Automation PowerFlex 700 Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 6000 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 6000 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 25-JBAA Bedienungsanleitung

Allen-Bradley

Allen-Bradley Series B Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 520 Series Bedienungsanleitung

Allen-Bradley

Allen-Bradley The PowerFlex 755 On-Machine Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1395 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 525 Benutzerhandbuch

Allen-Bradley

Allen-Bradley PowerFlex 4M Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 70 Enhanced Control Bedienungsanleitung

Allen-Bradley

Allen-Bradley powerflex 700 Bedienungsanleitung

Allen-Bradley

Allen-Bradley PowerFlex 70 Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1398 ULTRA Plus Series Bedienungsanleitung

Beliebte Gleichstromantrieb Handbücher anderer Marken

Chamberlain Garog

Chamberlain Garog D Series Bedienungsanleitung

Parker

Parker PDS Series Bedienungsanleitung

Festo

Festo DGC G Series Einrichtungshandbuch

Binks

Binks QS-5012-1-CE Bedienungsanleitung

Danfoss

Danfoss VLT 2800 Series Technisches Datenblatt

ABB

ABB ACQ580-01 Series Installationshandbuch

YASKAWA

YASKAWA CANopen SI-S3 Bedienungsanleitung

GE D20A6 Bedienungsanleitung

Unex

Unex MC-D-250-1000-050W-TW Bedienungsanleitung

Geckodrive

Geckodrive G213V Bedienungsanleitung

ABB

ABB RSYC-01 Bedienungsanleitung

Rockwell Automation

Rockwell Automation PowerFlex 700S Betriebsanleitung

WEG

WEG DeviceNet CFW500 Bedienungsanleitung

Siemens

Siemens SINAMICS G Datenblatt

Siemens

Siemens SINAMICS SM150 6SL3815-7NP41-0AA1 Betriebsanleitung

SOMFY

SOMFY JR RU 30 Bedienungsanleitung

Beckhoff

Beckhoff AX8911 Bedienerhandbuch

Lenze

Lenze 8200 vector Bedienungsanleitung