Altronix TROVE T2MK34D Bedienungsanleitung

Rev. TMKDL111121

Installing Company: _________________________ Service Rep. Name: __________________________________________

Address: _________________________________________________________ Phone #: _________________________

All registered trademarks are property of their respective owners. More than just power.™

Installation Guide

Access & Power Integration

Altronix Trove2/Mercury Kits with PTC Outputs

All components of these Trove kits are UL Listed sub-assemblies.

Please refer to the included corresponding Sub-Assembly Installation Guides for further information.

T2MK34D

Fully assembled 4 door kit includes:

- Trove2 enclosure with

TM2 Altronix/Mercury backplane

- (1) AL600ULXB - Power Supply/Charger

- (1) ACM4CB - PTC Access Power Controller

- (1) VR6 - Voltage Regulator

- (1) PDS8CB - Dual Input PTC Power Distribution Module

T2MK38D

Fully assembled 8 door kit includes:

- Trove2 enclosure with

TM2 Altronix/Mercury backplane

- (1) AL600ULXB - Power Supply/Charger

- (1) ACM8CB - PTC Access Power Controller

- (1) VR6 - Voltage Regulator

- (1) PDS8CB - Dual Input PTC Power Distribution Module

T2MK78D

Fully assembled 8 door kit includes:

- Trove2 enclosure with

TM2 Altronix/Mercury backplane

- (1) AL1024ULXB2 - Power Supply/Charger

- (1) ACM8CB- PTC Access Power Controller

- (1) VR6 - Voltage Regulator

- (1) PDS8CB - Dual Input PTC Power Distribution Module

T2MK7516D

Fully assembled 16 door kit includes:

- Trove2 enclosure with TM2 Altronix/Mercury

backplane and TMV2 door backplane

- (1) AL1024ULXB2 - Power Supply/Charger

- (1) AL1012ULXB - Power Supply/Charger

- (2) ACM8CB - PTC Access Power Controllers

- (1) PD16WCB - PTC Power Distribution Module

T2MK7716D

Fully assembled 16 door kit includes:

- Trove2 enclosure with TM2 Altronix/Mercury

backplane and TMV2 door backplane

- (2) AL1024ULXB2 - Power Supply/Chargers

- (2) ACM8CB - PTC Access Power Controllers

- (1) VR6 - Voltage Regulator

- (1) PDS8CB - Dual Input PTC Power Distribution Module

- 2 - Trove2/Mercury PTC ULXB Kits Installation Guide

Overview:

Altronix Trove Mercury kits are pre-assembled and consist of Trove2M2 enclosure with factory installed Altronix power supply/charger(s) and sub-assemblies.

These kits also accommodate various combinations of Mercury boards for up to sixteen (16) doors in a single enclosure.

Configuration Chart:

Altronix

Model Number

115VAC 60Hz

Input Current (A)

Power Supply Board

Input Fuse Rating

Power Supply Board

Battery Fuse Rating

Output Voltage Options

Maximum Supply

Current for Main and Aux.

Outputs on Power Supply

board and ACM4CB/

ACM8CB Access Power

Controller’s outputs

Fail-Safe/Fail-Secure

Auto-Resettable Outputs

Current Per ACM4CB/

ACM8CB Output (A)

ACM4CB/ACM8CB

Board Input Fuse Rating

ACM4CB/ACM8CB Board

Output PTC Rating

PDS8CB Board

Input Fuse Rating

PDS8CB Board

Output PTC Rating

PD8ULCB/PD16WCB

Board Output PTC Rating

Power

Supply 1

Power

Supply 2

T2MK34D 3.5 5A/

250V N/A

12VDC @

5.7A –24VDC @ 5.7A 4 2.0 10A/

250V 2A 10A/

250V 2A –

24VDC @

5.5A

T2MK38D 3.5 5A/

250V N/A

12VDC @

5.7A –24VDC @ 5.7A 8 2.0 10A/

250V 2A 10A/

250V 2A –

24VDC @

5.5A

T2MK78D 4.2 5A/

250V

15A/

32V

24VDC @

9.5A –24VDC @ 9.5A 8 2.0 10A/

250V 2A 10A/

250V 2A –

T2MK7516D 6.8 5A/

250V

15A/

32V

12VDC @

9.5A

24VDC @

9.5A

12VDC @ 9.3A

24VDC @ 9.5A 16 2.0 10A/

250V 2A – – 2A

T2MK7716D 8.4 5A/

250V

15A/

32V

24VDC @

9.5A

24VDC @

9.5A 24VDC @ 9.5A 16 2.0 10A/

250V 2A 10A/

250V 2A –

Installation Instructions:

Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction.

Product is intended for indoor use only.

1. Remove backplane(s) from enclosure. Do not discard hardware.

2. Mark and predrill holes in the wall to line up with the top three keyholes in the enclosure. Install three upper fasteners

and screws in the wall with the screw heads protruding. Place the enclosure’s upper keyholes over the three upper

screws, level and secure. Mark the position of the lower three holes. Remove the enclosure. Drill the lower holes

and install the three fasteners. Place the enclosure’s upper keyholes over the three upper screws. Install the three

lower screws and make sure to tighten all screws.

3. Mount included UL Listed tamper switch (Altronix Model TS112 or equivalent) in desired location, opposite

hinge. Slide the tamper switch bracket onto the edge of the enclosure approximately 2” from the right side

(Fig. 1, pg. 2). Connect tamper switch wiring to the Access Control Panel input or the appropriate UL Listed

reporting device. To activate alarm signal open the door of the enclosure.

4. Refer to the ULXB Power Supply/Charger Installation Guide for AL600ULXB, AL1012ULXB and AL1024ULXB2 and

Sub-Assembly Installation Guide for the following models: ACM4CB, ACM8CB, PDS8CB, VR6 for

further installation instructions.

5. Fasten snap on spacers onto metal pems configuration of backplane depending on the Mercury access controller

(Fig. 2-5, pg. 3-6).

6. Position Mercury access controller module over corresponding spacers and depress onto snap on spacers (Fig. 2-5, pg. 3-6).

7. Mount backplane to enclosure with hardware.

Fig. 1

Tamper Switch

(provided)

To Access Control Panel or

UL Listed Reporting Device

Edge of

Enclosure

Trove2/Mercury PTC ULXB Kits Installation Guide - 3 -

T2MK34D and T2MK38D Configuration of Mercury Boards:

1. Fasten snap on spacers onto metal pems configuration (A), (B), (C) or (D) of backplane depending on the access controller (Fig. 2, pg. 3).

2. Position access controller module over corresponding spacers and depress onto snap on spacers (Fig. 2a, pg. 3).

3. Mount backplane to enclosure with hardware.

Access Controller Position Chart for the Following Models:

Mercury Access Controller Pem Mounting

EP1502, MR52, MR16IN, MR16OUT A

EP2500, MUX8 B

EP1501, MR51e C

MR50 D

Fig. 2

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

10A 250V

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

MAIN

TRG

FACP

1 2 3 4

TRG

TRIGGER

INPUT

ACM4

ACCESS POWER

CONTROLLER

LED1 LED2 LED3 LED4

MAIN

OUTPUT 1

NC C NO COM NC C NO COM NC C NO COM NC C NO COM

OUTPUT 2 OUTPUT 3

IN GND

OUTPUT 4

-- +

CONTROL

-- +

POWER

+INP- T +RET-

INTERFACE

NO C NC

FACP

+ INP1 --

DM1 +OFF

IN1

IN2

Out1

<1 off 2>

DM1 +

DM2 +

Common (--- )

+ INP2 --

IN2 Fuse

IN1 Fuse

Common Power Outputs (NEG)

OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8

1 2 3 4 5 6 7 8

Out2

<1 off 2>

Out3

<1 off 2>

Out4

<1 off 2>

Out5

<1 off 2>

Out6

<1 off 2>

Out7

<1 off 2>

Out8

<1 off 2>

Altronix ACM4CB

(T2MK34D)

Altronix ACM8CB

(T2MK38D)

Altronix - PDS8CB

Altronix VR6 is mounted under PDS8CB

BAT FAIL NC C NO NC C NO AC FAIL

AC DC BAT

+BAT- + DC -

L G N

OFF - 24V

ON - 12V

Altronix - AL600ULXB

Snap On

Spacer

Mercury Board

Backplane

Pem

Fig. 2a

- 4 - Trove2/Mercury PTC ULXB Kits Installation Guide

T2MK78D: Configuration of Mercury Boards:

1. Fasten snap on spacers onto metal pems configuration (A), (B), (C) or (D) of backplane depending on the access controller (Fig. 3, pg. 4).

2. Position access controller module over corresponding spacers and depress onto snap on spacers (Fig. 3a, pg. 4).

3. Mount backplane to enclosure with hardware.

Access Controller Position Chart for the Following Models:

Mercury Access Controller Pem Mounting

EP1502, MR52, MR16IN, MR16OUT A

EP2500, MUX8 B

EP1501, MR51e C

MR50 D

Fig. 3

Altronix VR6 is mounted under PDS8CB

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

10A 250V

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

MAIN

TRG

FACP

1 2 3 4

Altronix PDS8CB

+ INP1 --

DM1 +OFF

IN1

IN2

Out1

<1 off 2>

DM1 +

DM2 +

Common (--- )

+ INP2 --

IN2 Fuse

IN1 Fuse

Common Power Outputs (NEG)

OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8

1 2 3 4 5 6 7 8

Out2

<1 off 2>

Out3

<1 off 2>

Out4

<1 off 2>

Out5

<1 off 2>

Out6

<1 off 2>

Out7

<1 off 2>

Out8

<1 off 2>

Altronix - ACM8CB

Altronix - AL1024ULXB2

BAT FAIL

AC FAIL

- BAT + + DC -

AC DELAY

Snap On

Spacer

Mercury Board

Backplane

Pem

Fig. 3a

Trove2/Mercury PTC ULXB Kits Installation Guide - 5 -

T2MK7516D: Configuration of Mercury Boards:

1. Fasten snap on spacers onto metal pems configuration (A), (B), (C) or (D) of backplane depending on the access controller (Fig. 4, pg. 5).

2. Position access controller module over corresponding spacers and depress onto snap on spacers (Fig. 4a, pg. 5).

3. Mount backplane to enclosure with hardware.

Access Controller Position Chart for the Following Models:

Mercury Access Controller Pem Mounting

EP1502, MR52, MR16IN, MR16OUT A

EP2500, MUX8 B

EP1501, MR51e C

MR50 D

Fig. 4

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

10A 250V

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

MAIN

TRG

FACP

1 2 3 4

Altronix - ACM8CB

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

10A 250V

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

MAIN

TRG

FACP

1 2 3 4

Altronix PD16WCB

XFMR INPUT SP

P N

1 2 3 4 5 6 7 8910 11 12 13 14 15 16

PROTECTED

OUTPUTS

COMMON

OUTPUTS

Altronix - AL1024ULXB2

BAT FAIL

AC FAIL

- BAT + + DC -

AC DELAY

+ BAT -

L G N BAT FAIL NC C NO NC C NO AC FAIL

AC DC

- DC +

Altronix- AL1012ULXB

B A

Snap On

Spacer

Mercury Board

Backplane

Pem

Fig. 4a

- 6 - Trove2/Mercury PTC ULXB Kits Installation Guide

T2MK7716D: Configuration of Mercury Boards:

1. Fasten snap on spacers onto metal pems configuration (A), (B), (C) or (D) of backplane depending on the access controller (Fig. 5, pg. 6).

2. Position access controller module over corresponding spacers and depress onto snap on spacers (Fig. 5a, pg. 6).

3. Mount backplane to enclosure with hardware.

Access Controller Position Chart for the Following Models:

Mercury Access Controller Pem Mounting

EP1502, MR52, MR16IN, MR16OUT A

EP2500, MUX8 B

EP1501, MR51e C

MR50 D

Fig. 5

Altronix VR6 is mounted under PDS8CB

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

10A 250V

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

MAIN

TRG

FACP

1 2 3 4

OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5 OUTPUT 6 OUTPUT 7 OUTPUT 8

NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM

IN GND IN GND IN GND IN GNDIN GND IN GND IN GND IN GND

1 2 3 4 5 6 7 8

INPUT

TRIGGER

10A 250V

+INP- T + RET-

NO C NC

FACP INTERFACE

Power Control

- + - +

F1 F2 F3 F4 F5 F6 F7 F8

MAIN

TRG

FACP

1 2 3 4

Altronix PDS8CB

+ INP1 --

DM1 +OFF

IN1

IN2

Out1

<1 off 2>

DM1 +

DM2 +

Common (--- )

+ INP2 --

IN2 Fuse

IN1 Fuse

Common Power Outputs (NEG)

OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8

1 2 3 4 5 6 7 8

Out2

<1 off 2>

Out3

<1 off 2>

Out4

<1 off 2>

Out5

<1 off 2>

Out6

<1 off 2>

Out7

<1 off 2>

Out8

<1 off 2>

Altronix - ACM8CB

Altronix - AL1024ULXB2

BAT FAIL

AC FAIL

- BAT + + DC -

AC DELAY

Altronix - AL1024ULXB2

BAT FAIL

AC FAIL

- BAT + + DC -

AC DELAY

B A

Snap On

Spacer

Mercury Board

Backplane

Pem

Fig. 5a

Trove2/Mercury PTC ULXB Kits Installation Guide - 7 -

Snap on

Spacer

Nylon

Spacer

Sub-Assembly

Backplane

Pem

TMV2 (T2MK7516D and T2MK7716D):

TMV2 accommodates a variety of Mercury boards with or without Altronix sub-assemblies for access systems.

Configuration of Mercury and/or Altronix Boards

Mercury Access Controllers:

1. Fasten spacers onto metal pems configuration (A) (B) of backplane depending on the access controller (Fig. 6, pg. 7).

2. Position access controller module over corresponding spacers and depress onto snap on spacers (Fig. 6a, pg. 7).

3. Mount backplane to enclosure with hardware.

Altronix Sub-Assemblies and/or Adapters:

1. Fasten spacers to pems which match the hole pattern (C) for Altronix Sub-Assemblies (Fig. 6, 6a, pg. 7).

2. Mount boards to spacers utilizing pan head screws provided with the product (Fig. 6, pg. 7).

Access Controller Position Chart for the Following Models:

Mercury

Access Controller Pem Mounting

EP1502, MR52, MR16IN, MR16OUT A

EP2500, MUX8 B

Altronix

Sub-Assembly or Adapter Pem Mounting

ACM4(CB), MOM5, PD4UL(CB), PD8UL(CB), PDS8(CB), VR6, GB1 (Genetec Synergis Cloud Link adapter plate) C

Fig. 6

Fig. 6a

- 8 - Trove2/Mercury PTC ULXB Kits Installation Guide

Enclosure Dimensions (H x W x D approximate):

27.25” x 21.5” x 6.5” (692.2mm x 552.5mm x 165.1mm)

6.75” (171.5mm)8.25” (209.5mm)

8.00” (203.2mm)

2.00” (50.8mm)

1.25” (31.8mm)

5.25” (133.4mm) 5.25” (133.4mm)7.00” (177.8mm)

1.25” (31.8mm)

6.25” (158.8mm) 19.80” (502.9mm)

1.00” (25.4mm)

27” (685.8mm)

1.5”

(38.1mm)

2.00” (50.8mm) 2.00” (50.8mm)

3.5”(88.9mm) 3.5”(88.9mm)

21.50” (546.1mm)

5.25” (133.35mm) 5.25” (133.35mm)

6.25” (158.8mm)

1.25”

(31.8mm)

0.85” (21.6mm)

0.5625” (14.3mm)

2.415” (61.3mm)

0.685” (17.4mm)

1.77”

(45mm)

0.885” (22.5mm)

1.125” (28.3mm)

Knockouts

2.00” (50.8mm) 2.00” (50.8mm)

Altronix is not responsible for any typographical errors.

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056

web site: www.altronix.com | e-mail: [email protected] | Lifetime Warranty

IITrove2/Mercury ULXB PTC Kits K11U

MEMBER

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Altronix Gehäuse Handbücher

Altronix

Altronix Trove1V1R Bedienungsanleitung

Altronix

Altronix TROVE TDMD2 Bedienungsanleitung

Altronix

Altronix Trove T1RAL13F8P8 Bedienungsanleitung

Altronix

Altronix TROVE T2PXK7F8V Bedienungsanleitung

Altronix

Altronix Trove1M1R Bedienungsanleitung

Altronix

Altronix Trove1HW1R Bedienungsanleitung

Altronix

Altronix TROVE T1MK1F4 Bedienungsanleitung

Altronix

Altronix TROVE T2MK3F4D Bedienungsanleitung

Altronix

Altronix Trove2KA2 Bedienungsanleitung

Altronix

Altronix TROVE Trove1PD1 Bedienungsanleitung

Altronix

Altronix Trove T2MK3F4D Bedienungsanleitung

Altronix

Altronix Trove2AM2 Bedienungsanleitung

Altronix

Altronix THN2 Bedienungsanleitung

Altronix

Altronix TROVE Trove2KS2 Bedienungsanleitung

Altronix

Altronix Trove1AL1R Bedienungsanleitung

Altronix

Altronix Trove T1PHK1F4S Bedienungsanleitung

Altronix

Altronix Trove T1RSH3F8 Bedienungsanleitung

Altronix

Altronix Trove 1AL1R Bedienungsanleitung

Altronix

Altronix Trove1M1R Bedienungsanleitung

Altronix

Altronix TROVE Trove3WC Series Bedienungsanleitung

Altronix

Altronix Trove2BL2 Bedienungsanleitung

Altronix

Altronix Trove T1PDK7F24 Bedienungsanleitung

Altronix

Altronix Trove Trove2KA2 Bedienungsanleitung

Altronix

Altronix TROVE T1RAG3F8 Bedienungsanleitung

Beliebte Gehäuse Handbücher anderer Marken

SilentiumPC

SilentiumPC Armis AR5 Handbuch

Pulsar

Pulsar 17/TRP80/DSPR Bedienungsanleitung

Thermaltake

Thermaltake V150 TG Bedienungsanleitung

MSI

MSI MPG SEKIRA 500X Bedienungsanleitung

Antec

Antec Dark fleet DF-10 Bedienungsanleitung

Nexans

Nexans WTC05 Bedienungsanleitung

Peavey

Peavey DS 1502 Bedienungsanleitung

D-Link

D-Link ShareCenter Pro DNS-1550-04 Bedienungsanleitung

Rosewill

Rosewill RX82-U(JBOD) Bedienungsanleitung

QNAP

QNAP SAS JBOD CLI 1.0 Bedienungsanleitung

GAMDIAS

GAMDIAS Talos P1 Bedienungsanleitung

Auvs

Auvs KR615 Bedienungsanleitung

Digitus

Digitus DA-71114 Bedienungsanleitung

CommScope

CommScope FDH 3000 Bedienungsanleitung

FS FHD-FWME4 Bedienungsanleitung

JBL

JBL CS1215T Bedienungsanleitung

Pulsar

Pulsar ARAD-S4 Bedienungsanleitung

Pulsar

Pulsar AWO454 Bedienungsanleitung