American DJ LED Touch Bedienungsanleitung

Features..................................................................................2

Customer Support......................................................................2

Controls and Functions - Front View...........................................2

Controls and Functions - Rear View ...........................................4

DMX Setup.................................................................................5

Program Chase...........................................................................8

Running Chase.. ........................................................................9

Select Scene in Chase.............................................................10

Manual Mode ..........................................................................10

Stand Alone Mode ...................................................................10

Menu Mode..............................................................................11

Set Date....................................................................................11

Set Time........ ...........................................................................12

Set Clock..................................................................................13

Delete Chase............................................................................14

Chase By Time....... .................................................................14

Erase Memory...........................................................................16

Lock Controller........... ............................................................ 16

DMX Configuration.................................................................. 17

Warranty...........................................................................19

Specifications...............................................................21

Rev. 1/12

LED Touch™ Table of Contents

User Instructions

American DJ® www.americandj.com - LED Touch Page 1

• Controls Up To 6 Individual RGB, RGBW, RGBD, or RGBD/S LED

Fixtures

• 6 Built-In Chases w/ Adjustable Hold/Fade Times

• 24 Factory Chase Macros

• 255 Preset RGB Color Levels

• Auto, Manual, and Sound Active Operation Modes

• 18 Programmable Chases, Up to 30 Steps each w/ Adjustable

Hold/Fade Times

• Built-In Clock For Event Triggering

• Compatible With The LED-T-FC Foot Controller (Not Included)

LED Touch™ Features

American DJ® www.americandj.com - LED Touch Page 2

Customer Support: American DJ®provides a toll free customer

support line, to provide set up help and to answer any question

should you encounter problems during your set up or initial opera-

tion. You may also visit us on the web at www.americandj.com for any

comments or suggestions. For service related issue please contact

American DJ®. Service Hours are Monday through Friday 8:00 a.m. to

4:30 p.m. Pacic Standard Time.

Voice: (800) 322-6337

Fax: (323) 582-2941

E-mail: [email protected]

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures

warranty. In the unlikely event your unit may require service please

contact American DJ customer support.

PLEASE recycle the shipping carton whenever possible.

LED Touch™ Customer Support

The LED Touch™ carries a one year limited warranty. Please fill out the

enclosed warranty card to validate your purchase. All returned service

items whether under warranty or not, must be freight pre-paid and

accompany a return authorization (R.A.) number. If the unit is under

warranty you must provide a copy of your proof of purchase invoice.

Please contact American DJ®customer support for a R.A. number.

LED Touch™ Product Registration

LED Touch™ Controls and Functions - Front View

1. UP AND DOWN BUTTONS - These buttons are used to adjust the

DMX values.

2. LED WINDOW - Displays values and settings depending on the

chosen function.

3. RUN MODE - Used to select manual mode, sound active mode, or

auto mode. The LEDs located next to the button will let you know what

mode is currently active.

4. CHASE - Use this button to run or save a chase.

5. MACRO - There are 24 macros, the fade time and wait time is adjust-

able.

6. SCENE - Used to store Scenes in program mode or

playback your scenes in playback mode. Every Chase has 30 scenes.

7. FIXTURE BUTTONS - Used to select any or all 6 fixtures.

8. FADE - This button will let you begin to set your fade time.

9. DIMMER/WHITE - This button will let you adjust the dimmer.

10. COLOR(R/G/B) - This button will let you choose a built-in color.

11. PROGRAM/REC - Used to enter program mode and record.

12. MENU/FADE TIME - Use this button to enter the menu and set a fade

time of a macro.

13. JOG WHEEL - Use the jog wheel to adjust values and other functions.

14. ENTER/HOLD TIME - Use this button to select programs in the menu

and set a hold time of a macro.

15. BLACKOUT - Activates and deactivates blackout mode.

16. POWER SWITCH - Switches the power on or off.

17. DC INPUT - Accepts a DC 9V, 500 mA minimum, power

supply.

18. DMX OUT - Used to send DMX signal to fixtures or Packs.

19. LED-T-FC - Connect the LED-T-FC to this input (Not Included).

LED Touch™ Controls and Functions - Rear View

American DJ® www.americandj.com - LED Touch Page 4American DJ® www.americandj.com - LED Touch Page 3

19181716

LED Touch™ Controls and Functions - Front View

LED Touch™ DMX Set Up

American DJ® www.americandj.com - LED Touch Page 6American DJ® www.americandj.com - LED Touch Page 5

Power Supply: Before plugging your unit in, be sure the source volt-

age in your area matches the required voltage for your American DJ®

LED Touch. Be sure to only use the included power adapter supplied

with the unit.

DMX-512: DMX is short for Digital Multiplex. This is a universal pro-

tocol used by most lighting and controller manufactures as a form of

communication between intelligent fixtures and controllers. A DMX

controller sends DMX data instructions from the controller to the fix-

ture. DMX data is sent as serial data that travels from fixture to fixture

via the DATA “IN” and DATA “OUT” XLR terminals located on all DMX

fixtures (most controllers only have a DATA “OUT” terminal).

DMX Linking: DMX is a language allowing all makes and models of

dierent manufactures to be linked together and operate from a single

controller, as long as all xtures and the controller are DMX compli-

ant. To ensure proper DMX data transmission, when using several

DMX fixtures try to use the shortest cable path possible. The order

in which fixtures are connected in a DMX line does not influence the

DMX addressing. For example; a fixture assigned a DMX address of 1

may be placed anywhere in a DMX line, at the beginning, at the end,

or anywhere in the middle. Therefore, the first fixture controlled by

the controller could be the last fixture in the chain. When a fixture is

assigned a DMX address of 1, the DMX controller knows to send DATA

assigned to address 1 to that unit, no matter where it is located in the

DMX chain.

Data Cable (DMX Cable) Requirements (For DMX and Master/Slave

Operation): DMX controller and unit require a approved DMX-512

110 Ohm Data cable for data input and data output (Figure 1). We

recommend Accu-Cable DMX cables. If you are

making your own cables, be sure to use standard

110-120 Ohm shielded cable (This cable may be

purchased at almost all professional sound and

lighting stores). Your cables should be made with

a male and female XLR connector on either end of

the cable. Also remember that DMX cable must be

daisy chained and cannot be split.

Figure 1

Notice: Be sure to follow gures two and three when making your own

cables. Do not use the ground lug on the XLR connector. Do not con-

nect the cable’s shield conductor to the ground lug or allow the shield

conductor to come in contact with the XLR’s outer casing. Grounding

the shield could cause a short circuit and erratic behavior.

DMX512 IN

3-PIN XLR

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

DMX512

DMX+,DMX-,COMMON

Termination reduces signal errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture.

DMX +

DMX -

COMMON

DMX512 OUT

3-PIN XLR

Figure 2

Figure 3

1 Ground 1 Ground

XLR Male Socket XLR Pin Conguration

3 Hot

2 Cold 2 Cold

3 Hot

XLR Female Socket

Pin 3 = Data True (positive)

Pin 2 = Data Compliment (negative)

Pin 1 = Ground

Special Note: Line Termination.

When longer runs of cable are

used, you may need to use a terminator on the last unit to avoid erratic

behavior. A terminator is a 110-120 ohm 1/4 watt resistor which is con-

nected between pins 2 and 3 of a male XLR connector (DATA + and

DATA -). This unit is inserted in the female XLR connector of the last

unit in your daisy chain to terminate the line. Using a cable terminator

(ADJ part number Z-DMX/T) will decrease the possibilities of erratic

behavior.

DMX512 IN

3-PIN XLR

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

SOUND

REMOTE

CONTROL

INPUT

POWER

INPUT OUTPUT

DMX512

DMX+,DMX-,COMMON

Termination reduces signal errors and

avoids signal transmission problems

and interference. It is always advisable

to connect a DMX terminal, (Resistance

120 Ohm 1/4 W) between PIN 2 (DMX-)

and PIN 3 (DMX +) of the last fixture.

DMX +

DMX -

COMMON

DMX512 OUT

3-PIN XLR

Figure 4

LED Touch™ DMX Set Up

American DJ® www.americandj.com - LED Touch Page 8American DJ® www.americandj.com - LED Touch Page 7

5-Pin XLR DMX Connectors.

Some manufactures use 5-pin DMX-

512 data cables for DATA transmission in place of 3-pin. 5-pin DMX

xtures may be implemented in a 3-pin DMX line. When inserting stan-

dard 5-pin data cables in to a 3-pin line a cable adaptor must be used,

these adaptors are readily available at most electric stores. The chart

below details a proper cable conversion.

Conductor 5-Pin XLR Male (In)3-Pin XLR Female (Out)

Pin 1

Pin 5 - Do Not Use

Pin 4 - Do Not Use

Pin 3

Pin 2

Pin 1

Pin 3

Pin 2

Not Used

Data True (+ signal)

Data Compliment (- signal)

Ground/Shield

3-Pin XLR to 5-Pin XLR Conversion

PROGRAM A CHASE:

You can save 24 chases max, and each chase can include up to 30

scenes.

NOTE: CHASES 1-6 ARE BUILT-IN CHASES THAT YOU SHOULD

NOT EDIT OR DELETE.

1. Enter Program Mode. Hold the PROGRAM/REC button (11) for 3

seconds, the PROGRAM/REC LED will start blinking, indicating

that Program mode is active.

2. Press the CHASE button, and then press either the UP or DOWN

buttons or turn the JOG WHEEL, to select the chase number.

3. Press the SCENE button, and then press either the UP or DOWN

buttons or turn the JOG WHEEL to select the scene number.

4. Press the DIMMER button, the LCD will display “CXX SNXX/”

DIM XXX”, press either then UP or DOWN buttons or turn the

JOG WHEEL, to adjust the dimmer.

Note: You should set the dimmer to open or full on (default) or there

will be no LED output.

5. Select your desired fixtures, 1-6, that you would like to operate.

6. Select your desired effect, by pressing either COLOR, FADE, or

MACRO.

COLOR - Choose built-in color by using the UP or DOWN buttons

or turning the jog wheel.

FADE - Use the jog wheel to adjust the fade speed (0s-90m).

MACRO - Select one of 24 macros, and adjust the fade time or

hold time. Press MENU/FADE TIME to adjust the fade time, or press

ENTER/HOLD TIME to set the hold time.

7. Once you have chose your desired effect press the DIMMER but-

ton to select your desired intensity.

8. Press the PROGRAM/REC button to store the scene. If the

Program/Rec and Blackout LEDs blink 3 times, the save was suc-

cessfull. The display will show “CXX SXX/STORE OK”, and auto-

matically go to the next scene to be set.

LED Touch™ Program A Chase

American DJ® www.americandj.com - LED Touch Page 10American DJ® www.americandj.com - LED Touch Page 9

LED Touch™ Running A Chase

LED Touch™ Select A Scene In A Chase

RUNNING A CHASE:

1. Turn on the LED Touch, and it will enter its last running mode or

timing mode directly.

2. There are 3 function modes: Auto Mode, Manual Mode, and

Timing Mode.

A. Auto Mode - Auto Mode is the default mode. Press the CHASE

button, and then press either the UP or DOWN buttons or turn the

JOG WHEEL to select a chase, it will run automatically and the

LCD will display “CXX SNXX/AUTO”.

B. Manual Mode - Press the CHASE button, and then press either

the UP or DOWN buttons or turn the JOG WHEEL to select a

chase.

To enter Manual mode press the SCENE button. The LCD will

display “CXX SNXX/MANUAL”. You can now move through the

Scenes using the UP or DOWN buttons or the JOG WHEEL.

To switch to another Chase, press the CHASE button, then

choose your desired chase and press the SCENE button to reen-

ter Manual mode.

C. Music Mode - The Chase will run to the beat of music.

3. You can press the BLACKOUT button at anytime to enter Blackout

mode and stop light output immediately.

9. Repeat steps 3-8 to set more scenes.

10. When you are finished setting up your desired chase, press and

hold the PROGRAM/REC button for 3 seconds to exit the pro-

gram.

LED Touch™ Program A Chase

1. Press the CHASE button, and then press either the UP or DOWN

buttons or turn the JOG WHEEL to select a chase.

2. Enter Manual mode by presssing the SCENE button. The LCD will

display “CXX SNXX/MANUAL”. You can now find your desired

Scene using the UP or DOWN buttons or the JOG WHEEL.

LED Touch™ Manual Mode

1. Press either the COLOR, FADE, or MACRO buttons to enter

Manual mode.

2. Select your desired fixtures, 1-6, that you would like to operate.

3. Select your desired effect, by pressing either COLOR, FADE, or

MACRO.

COLOR - Choose built-in color by using the UP or DOWN buttons or

turning the jog wheel.

FADE - Use the jog wheel to adjust the fade speed (0s-90m).

MACRO - Select one of 24 macros, and adjust the fade time or

hold time. Press MENU/FADE TIME to adjust the fade time, or press

ENTER/HOLD TIME to set the hold time.

4. In COLOR, FADE, or MACRO mode, you can press the DIMMER

button to adjust.

LED Touch™ Stand Alone Mode

When this mode is activated, the DMX signal will be cut, and the

light will run its own internal program.

1. Hold the BLACKOUT button for 3 seconds to enter Blackout

mode. The LCD will display “STAND ALONE” with the Blackout

LED blinking. The lights will now run the last mode it was set to.

Example: Before the light was connected to the controller, the light

was running in sound active mode. When the the controller goes

to the “Stand Alonde” mode, sound active mode will begin to run

again.

2. Press the BLACKOUT button again to exit Blackout mode

American DJ® www.americandj.com - LED Touch Page 12American DJ® www.americandj.com - LED Touch Page 11

LED Touch™ Menu Mode

In Menu mode you can set the date, time, clock, delete a chase,

chase by time, erase memory, lock keyboard, and DMX configura-

tion.

1. To enter Menu mode press the MENU/FADE TIME button for 3

seconds.

2. To exit Menu mode press the MENU/FADE TIME button.

LED Touch™ Set Date

In this submenu you can set the date. The date is displayed as

Year-Month-Day.

Note: “XX” represents a displayed number.

1. Enter the Menu mode by pressing the MENU/FADE TIME

button for 3 seconds.

2. Press the UP or DOWN button or turn the JOG WHEEL until

“1. SET DATE” is displayed, press the ENTER/HOLD TIME

button.

3. The LCD will display “DATE SUN /XX-XX-XX” (Year-Month-

Day) with the cursor under year. Press the ENTER/HOLD

TIME button, and the year will begin to blink.

4. Press the UP or DOWN buttons, or turn the JOG WHEEL to

adjust the year to the current year, and then press the

ENTER/HOLE TIME button to store the change.

5. Press the UP or DOWN buttons, or turn the JOG WHEEL to

move the cursor to the “month” setting. Press the ENTER/

HOLD TIME button, and the month will begin to blink.

6. Press the UP or DOWN buttons, or turn the JOG WHEEL to

adjust the month to the current month, and then press the

ENTER/HOLE TIME button to store the change.

7. Press the UP or DOWN buttons, or turn the JOG WHEEL to

move the cursor to the “day” setting. Press the ENTER/

HOLD TIME button, and the day will begin to blink.

8. Press the UP or DOWN buttons, or turn the JOG WHEEL to

adjust the day to the current day, and then press the

ENTER/HOLE TIME button to store the change.

9. Press the UP or DOWN buttons, or turn the JOG WHEEL

until “STORE/DATE SET” is displayed, press the ENTER/

HOLD TIME button save and exit, or press the MENU/FADE

TIME button to exit to the main menu without making any

changes.

LED Touch™ Set Date

LED Touch™ Set Time

In this submenu you can set the time.

Note: “XX” represents a displayed number.

1. Enter the Menu mode by pressing the MENU/FADE TIME

button for 3 seconds.

2. Press the UP or DOWN button or turn the JOG WHEEL until

“2. SET TIME” is displayed, press the ENTER/HOLD TIME

button.

3. The LCD will display “TIME /XX:XX:XX” (Hour-Minute-Sec-

ond) with the cursor under “hour”. Press the ENTER/HOLD

TIME button, and the hour will begin to blink.

4. Press the UP or DOWN buttons, or turn the JOG WHEEL to

adjust the hour to the current hour, and then press the

ENTER/HOLE TIME button to store the change.

5. Press the UP or DOWN buttons, or turn the JOG WHEEL to

move the cursor to the “minute” setting. Press the ENTER/

HOLD TIME button, and the minute will begin to blink.

6. Press the UP or DOWN buttons, or turn the JOG WHEEL to

adjust the minute to the current minute, and then press the

ENTER/HOLE TIME button to store the change.

7. Press the UP or DOWN buttons, or turn the JOG WHEEL to

move the cursor to the “seconds” time setting. Press the

ENTER/HOLD TIME button, and the second will begin to

American DJ® www.americandj.com - LED Touch Page 14American DJ® www.americandj.com - LED Touch Page 13

blink.

8. Press the UP or DOWN buttons, or turn the JOG WHEEL to

adjust the second, and then press the ENTER/HOLE TIME

button to store the change.

9. Press the UP or DOWN buttons, or turn the JOG WHEEL

until “STORE TIME SET” is displayed, press the ENTER/

HOLD TIME button save and exit, or press the MENU/FADE

TIME button to exit to the main menu without making any

changes.

LED Touch™ Set Time

LED Touch™ Set Clock

In this submenu you can set a start up time.

1. Enter the Menu mode by pressing the MENU/FADE TIME

button for 3 seconds.

2. Press the UP or DOWN button or turn the JOG WHEEL until

“3. SET CLOCK” is displayed, press the ENTER/HOLD TIME

button.

3. The LCD will display “CLOCK SET: SUN” with “SUN” blinking

indicating to set the day.

4. Press the UP or DOWN buttons, or turn the JOG WHEEL to

adjust the day, and then press the ENTER/HOLE TIME button

to conrm.

5. The LCD will display “CLOCK /SUN:1”, press the UP or

DOWN buttons, or turn the JOG WHEEL to adjust the de-

sired timing; 1 to 3, this means that can set 3 timings a day.

Press the ENTER/HOLE TIME button to conrm.

6. The LCD will display “ON: SUN/XX:XX:XX”. Press the UP or

DOWN buttons, or turn the JOG WHEEL to move the cursor

to your desired number, and then press the ENTER/HOLD

TIME button. The number will begin to blink.

7. Use the UP or DOWN buttons, or the JOG WHELL adjust

the number then press the ENTER/HOLD TIME button again

to conrm.

8. Use the UP or DOWN buttons, or the JOG WHEEL to adjust

the hour, minute, and seconds. When your done, press the

ENTER/HOLD TIME button to store the ON time.

9. Turn the JOG WHEEL so that “OFF: SUN /XX:XX:XX” is dis

played.

10. Use the UP or DOWN buttons, or the JOG WHEEL to adjust

the day, hour, minute, and seconds. When your done, press

the ENTER/HOLD TIME button to store the OFF time.

NOTE: Timing is done on a weekly cycly, if the OFF time that is

set is before the ON time that is set, the timing will be not work.

11. Turn the JOG WHEEL or press the DOWN button, to go to

the next page, the LCD will display “CHASE /[X]”.

12. Press the ENTER/HOLD TIME button, the chase number

will begin to blink. Use the UP or DOWN button, or JOG

WHEEL to scroll to your desired chase, press the ENTER/

HOLD TIME button to conrm your desired chase.

13. Press the DOWN button, or use the JOG WHEEL to go to

the nal page. The LCD will display “CLOCK /[OFF]”.

14. If you press the ENTER/HOLD TIME button, the display will

begin to blink, use the UP or DOWN buttons, or JOG

WHEEL to adjust the setting, either ON or OFF. Press the

ENTER/HOLD TIME button to conrm.

15. Press the DOWN button or use the JOG WHEEL to scroll to

the next page. The LCD will display “STORE /SUN1 SET”,

press the ENTER/HOLD TIME button to conrm all settings.

If you are successful, the Program/Rec LED and Blackout

LED will blink 3 times.

16. Follow the steps again to set other timings.

NOTE: Never set the same timings!

American DJ® www.americandj.com - LED Touch Page 16American DJ® www.americandj.com - LED Touch Page 15

LED Touch™ Delete Chase

In this submenu you can delete a desired chase.

1. Enter the Menu mode by pressing the MENU/FADE TIME

button for 3 seconds.

2. Press the UP or DOWN button or turn the JOG WHEEL until

“4. DELETE CHASE” is displayed, press the ENTER/HOLD

TIME button.

3. The LCD will display “DELETE CHASE 07”, “07” is blinking.

Use the UP or DOWN buttons, or JOG WHEEL scroll through

the chases.

4. When you have found the chase you would like to delete,

press the ENTER/HOLD TIME button.

5. The LCD will display “DELETE /NO”, “NO” is blinking. Press

the UP button or use the JOG WHEEL so that “YES” is now

diplayed. Press the ENTER/HOLD TIME button to delete the

chase.

6. Repeat steps 3-5 to delete more chases.

LED Touch™ Chase By Time

In this submenu you can set the chases to run by either the

chase time or scene time. The chase time is set when in chase

mode using the MENU/FADE TIME button or ENTER/HOLD

TIME button. The scene time using the same buttons while set-

ting your scene in scene mode, see Program A Chase.

1. Enter the Menu mode by pressing the MENU/FADE TIME

button for 3 seconds.

2. Press the UP or DOWN button or turn the JOG WHEEL until

“5. CHASE BY TIME” is displayed, press the ENTER/HOLD

TIME button.

3. The LCD will display “RUN TIME BY CHASE”, “BY CHASE”

is blinking. Use the UP or DOWN buttons, or JOG WHEEL

to display either “BY CHASE” or “BY SCENE”.

LED Touch™ Chase By Time

4. When you have made your selection, press the ENTER/

HOLD TIME button to conrm.

LED Touch™ Erase Memory

In this submenu you can erase the memory.

1. Enter the Menu mode by pressing the MENU/FADE TIME

button for 3 seconds.

2. Press the UP or DOWN button or turn the JOG WHEEL until

“6. ERASE MEMORY” is displayed, press the ENTER/HOLD

TIME button.

3. The LCD will display “ERASE /[NO]”, “NO” is blinking. Press

the UP button or use JOG WHEEL to display “YES”.

4. Press the ENTER/HOLD TIME button to erase the memory.

The LCD will display “PLEASE WAIT...”, 5 seconds later all

LEDs will blink 3 times, indicating the erase was successful.

LED Touch™ Lock Keyboard

In this submenu you can lock the keyboard to prevent any ac-

cidental changes..

1. Enter the Menu mode by pressing the MENU/FADE TIME

button for 3 seconds.

2. Press the UP or DOWN button or turn the JOG WHEEL until

“7. LOCK KEYBOARD” is displayed, press the ENTER/HOLD

TIME button.

3. The LCD will display “LOCK/[DISABLE”, “DISABLE” is blink-

ing. Press the UP button or use JOG WHEEL to display

“ABLE”.

4. Press the ENTER/HOLD TIME button to lock the keyboard.

NOTE: The keyboard will lock automatically when you set Lock

Keyboard to “ABLE”. A lock icon will appear in the LCD, and

American DJ® www.americandj.com - LED Touch Page 18American DJ® www.americandj.com - LED Touch Page 17

all buttons are locked. You can unlock the buttons by press-

ing buttons 1, 3, & 6 at the same time until the unlock icon is

displayed in the LCD. If you want to lock the keyboard again

automatically, press the ENTER/HOLD TIME button until the

LCD displays the unlock icon, then press buttons 1, 3, & 6 at

the same time to lock it.

LED Touch™ Lock Keyboard

LED Touch™ DMX Configuration

In this submenu you can set the DMX Conguration.

1. Enter the Menu mode by pressing the MENU/FADE TIME

button for 3 seconds.

2. Press the UP or DOWN button or turn the JOG WHEEL until

“8. DMX CONFIG” is displayed, press the ENTER/HOLD

TIME button.

3. The LCD will display “CONFIG /[RGBD/S]”, “RGBD/S” is

blinking. Press the UP button or use JOG WHEEL to choose

your desired setting. Choose between RGBD/S, RGBD,

RGBW, or RGB.

RGBD/S - This mode is used for lights that have a DMX setup

with Channel 1 is Red, Channel 2 is Green, Channel 3 is

Blue, and Channel 4 is Dimmer/Strobe.

RGBD - This mode is used for lights that have a DMX setup

with Channel 1 is Red, Channel 2 is Green, Channel 3 is

Blue,and Channel 4 is Dimmer.

RGBW - This mode is used for lights that have a DMX setup

with Channel 1 is Red, Channel 2 is Green, Channel 3 is

Blue,and Channel 4 is White.

RGB - This mode is used for lights that have a DMX setup with

Channel 1 is Red, Channel 2 is Green, and Channel 3 is Blue.

4. Once you have gured out your desired DMX conguration

press the ENTER/HOLD TIME button to conrm.

The LED Touch is used to control units with 3 & 4 channels, so

LED Touch™ DMX Configuration

when you operate more than one unit, please set the addresses

for the rst six units as shown below:

DMX Modes: RGBD/S, RGBD, RGBW, & RGB

Units 1 2 3 4 5 6

Addresses 1 5 9 13 17 21

Inhaltsverzeichnis

Andere American DJ DJ-Equipment Handbücher

American DJ

American DJ DJ Scan 250 Bedienungsanleitung

American DJ

American DJ Rolling Star Bedienungsanleitung

American DJ

American DJ Quad Gem DMX Bedienungsanleitung

American DJ

American DJ Starball LED DMX Bedienungsanleitung

American DJ

American DJ Roto-Balls VS MKII Bedienungsanleitung

American DJ

American DJ Pinspot LED Bedienungsanleitung

American DJ

American DJ Flash Tube Buffer Bedienungsanleitung

American DJ

American DJ 250HP Bedienungsanleitung

American DJ

American DJ DJ Spot LED Betriebsanleitung

American DJ

American DJ Chameleon Bedienungsanleitung

American DJ

American DJ Double Feature Bedienungsanleitung

American DJ

American DJ LED Vision Bedienungsanleitung

American DJ

American DJ X-Treme/19C Montageanleitung

American DJ

American DJ Progressor Bedienungsanleitung

American DJ

American DJ STAGE DESK-16 Bedienungsanleitung

American DJ

American DJ Mini Mine Bedienungsanleitung

American DJ

American DJ T4 Bedienungsanleitung

American DJ

American DJ Flash-2C Bedienungsanleitung

American DJ

American DJ BU-200 Bedienungsanleitung

American DJ

American DJ Fusion Tri FX Bar Bedienungsanleitung

American DJ

American DJ Accu Spot Pro Bedienungsanleitung

American DJ

American DJ LED Messenger Bedienungsanleitung

American DJ

American DJ Utopia 250S Bedienungsanleitung

American DJ

American DJ 1.4 Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung