AMG AMG4707 Bedienungsanleitung

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 1 of 8 AMG4707 Instruction Sheet D16304-

02.doc

AMG4707

Instruction Manual

Data Transmit Unit with up to 16 Bi-directional Data and

Audio Channels

The AMG4707 is a standalone data transmit unit designed to transmit and receive up to 16 data or

audio signals over two multimode fibres. The 16 data/audio channel interfaces, whether RS232,

RS422, RS485, 20mA, TTL, Contact Closure, Lonworks or Audio, are defined at manufacture by the

addition of daughter boards fitted onto the Data Expansion Boards A and B.

The AMG4707 is designed to be powered by an AMG2003 power supply.

The AMG4707 is designed to operate with AMG4708 or rackmount equivalent AMG4708R data

receive unit in a point to point configuration.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 2 of 8 AMG4707 Instruction Sheet D16304-

02.doc

Contents

Introduction 3

Unit Functional Schematic.................................................................................................................. 3

Optical Connection ............................................................................................................................. 3

Connections 4

Optical Connections ........................................................................................................................... 4

Power Connection .............................................................................................................................. 4

Data Channel Connections................................................................................................................. 4

Data and Audio Channel Configuration 5

Data Interface Daughter Board Options ............................................................................................. 5

Data and Audio Channel Configuration.............................................................................................. 5

Daughter Board Layout ...................................................................................................................... 5

Data and Audio Daughter Board Fitting Instruction............................................................................ 5

Data and Audio Connections.............................................................................................................. 6

Front Panel Indicators 7

Power LED.......................................................................................................................................... 7

Fibre Optic LED’s ............................................................................................................................... 7

Low Speed Data LEDs ....................................................................................................................... 7

Physical Information 8

Dimensions ......................................................................................................................................... 8

Mounting Details................................................................................................................................. 8

Removal / replacement from / to the Case......................................................................................... 8

Safety 8

Maintenance and Repair 8

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 3 of 8 AMG4707 Instruction Sheet D16304-

02.doc

Introduction

Unit Functional Schematic

The AMG4707 transmits up to 16 data and

audio signals to the AMG4708.

It also receives up to 16 data and audio

channels transmitted from the AMG4708.

Optical Connection

The AMG4707 is connected as illustrated below when used with an AMG4708 data receive unit acting

as a point to point system.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 4 of 8 AMG4707 Instruction Sheet D16304-

02.doc

Connections

Optical Connections

PRIMARY OPTO OUT

Connector ............................................LC/PC

Primary Optical Launch Power ............-5dBm

Wavelength..........................................1310nm

Optical Fibre ........................................Singlemode

PRIMARY OPTO IN

Connector ............................................LC/PC

Primary Optical Sensitivity ...................-22dBm

Wavelength..........................................1310nm

Optical Fibre ........................................Singlemode

Power Connection

Connector Type ...................................2.1mm screw lock long power jack – centre positive

Connector Partno.................................Switchcraft S761K, AMG G16125-00

Supply Voltage.....................................13.5 to 18.0 Volts DC.

Maximum Power .................................15 Watts

Data Channel Connections

Total No. of Data Channels .................16 channels

Data/Audio Channels – BANK A .........8 channels

Data/Audio Channels – BANK B .........8 channels

Connectors ..........................................Two 37-way D-Type female connectors - shielded.

Connections.........................................See below for connection and configuration

For the data or audio channels to be present, the appropriate data daughter boards have to be fitted

into the data expansion board slots.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 5 of 8 AMG4707 Instruction Sheet D16304-

02.doc

Data and Audio Channel Configuration

The AMG4707 and rackmount equivalent AMG4707R sends and receives data in two banks - Bank A

and Bank B each of which carries up to 8 channels of data / audio. The physical interface is

determined by the fitting of AMG data or audio daughter boards onto the appropriate data expansion

board slots.

Data Interface Daughter Board Options

The data interface daughter board options are as follows:

Option Code

'x'

Part No. Description

0 X12542 4 Wire Audio Interface Daughter Board

1 X04057 RS422/485 Data Interface Daughter Board

2 X04049 RS232 Data Interface Daughter Board

3 X04058 20mA Current Loop Data Interface Daughter Board

4 X12579 TTL Data Interface Daughter Board

5 X12578 Contact Closure Data Interface Daughter Board

6 X13038 FTT10A Echelon Lonworks Data Interface Daughter Board

Data and Audio Channel Configuration

The data expansion board slots are accessed by removing the AMG unit from its case. A data channel

is active when a daughter board is installed in the required data channel slot. Each data interface

board enables one bi-directional channel.

Daughter Board Layout

The channel slots are as follows:

Data and Audio Daughter Board Fitting Instruction

The data and audio daughter boards pushed on to the pin headers mounted on the data expansion

boards. Ensure that the connectors are lined up correctly and not offset before pushing firmly in place.

Note that the data and audio channel numbers are associated with each slot. This allocates the pin

numbers on the rear panel connector together with the front panel LED indicators.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 6 of 8 AMG4707 Instruction Sheet D16304-

02.doc

Data and Audio Connections

The BANK A/B data/audio channels pin connections on the rear panel connectors are as follows:

No.

Description Bank Pin

No.

Description Bank

1 Audio/Data CH1 IN + (A) A/B 20 Audio/Data CH1 OUT + (A) A/B

2 Audio/Data CH1 IN - (B) A/B 21 Audio/Data CH1 OUT - (B) A/B

3 Audio/Data CH2 IN + (A) A/B 22 Audio/Data CH2 OUT + (A) A/B

4 Audio/Data CH2 IN - (B) A/B 23 Audio/Data CH2 OUT - (B) A/B

5 Audio/Data CH3 IN + (A) A/B 24 Audio/Data CH3 OUT + (A) A/B

6 Audio/Data CH3 IN - (B) A/B 25 Audio/Data CH3 OUT - (B) A/B

7 Audio/Data CH4 IN + (A) A/B 26 Audio/Data CH4 OUT + (A) A/B

8 Audio/Data CH4 IN - (B) A/B 27 Audio/Data CH4 OUT - (B) A/B

9 GND A/B 28 GND A/B

10 GND A/B 29 GND A/B

11 GND A/B 30 Audio/Data CH5 OUT + (A) A/B

12 Audio/Data CH5 IN + (A) A/B 31 Audio/Data CH5 OUT - (B) A/B

13 Audio/Data CH5 IN - (B) A/B 32 Audio/Data CH6 OUT + (A) A/B

14 Audio/Data CH6 IN + (A) A/B 33 Audio/Data CH6 OUT - (B) A/B

15 Audio/Data CH6 IN - (B) A/B 34 Audio/Data CH7 OUT + (A) A/B

16 Audio/Data CH7 IN + (A) A/B 35 Audio/Data CH7 OUT - (B) A/B

17 Audio/Data CH7 IN - (B) A/B 36 Audio/Data CH8 OUT + (A) A/B

18 Audio/Data CH8 IN + (A) A/B 37 Audio/Data CH8 OUT - (B) A/B

19 Audio/Data CH8 IN - (B) A/B

Note: (A) or (B) in brackets in above table refers to RS485/RS422 data specification not Bank A, B.

See Data or Audio Daughter Board Instruction Sheet for meaning of Audio/Data IN+, Audio/Data IN-

Audio/Data OUT+, and Audio/Data OUT- for each data type.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 7 of 8 AMG4707 Instruction Sheet D16304-

02.doc

Front Panel Indicators

Power LED

Power .................................................. Green - unit powered

Off - no power applied to unit

Fibre Optic LED’s

Primary Opto Sync TX......................... Green - optical channel transmitting

Off - optical channel not transmitting

Primary Opto Sync RX ........................Green - optical channel receiving

Org - optical channel receiving but not sync.

Off - optical channel not transmitting

Low Speed Data LEDs

BANK A or B (When RS232 data daughter board fitted)

Data Present CH1-16 TX .................... Green - logic zero (+V) present on IN+

Red - logic transitions present on IN+

Off - logic one (-V) present on IN+

This represents the data signals being transmitted on the optical fibre

Data Present CH1-16 RX .................... Green - logic zero (+V) present on OUT+

Red - logic transitions present on OUT+

Off - logic one (-V) present on OUT+

This represents the data signals being received on the optical fibre

BANK A or B (When RS485 / RS422 data daughter board fitted)

Data Present CH1-16 TX .................... Green - logic zero (+V, -V) present on IN+, IN-

Red - logic transitions present on IN+, IN-

Off - logic one (-V, +V) present on IN+, IN-

This represents the data signals being transmitted on the optical fibre

Data Present CH1-16 RX .................... Green - logic zero (+V, -V) present on OUT+, OUT-

Red - logic transitions present on OUT+, OUT-

Off - logic one (-V , +V) present on OUT+, OUT-

This represents the data signals being received on the optical fibre

BANK A or B (When audio daughter board fitted)

Audio Present TX ................................ Green - audio present > -40dBm

Red - audio present > 0dBm (overload at +6dBm)

Off - audio not present or < -40dBm

This represents the data signals being transmitted on the optical fibre

Audio Present RX ................................ Green - audio present > -40dBm

Red - audio present > 0dBm (overload at +6dBm)

Off - audio not present or < -40dBm

This represents the audio signals being received from the optical fibre.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 8 of 8 AMG4707 Instruction Sheet D16304-

02.doc

Physical Information

Dimensions

Height...................................................112mm

Width....................................................170mm (excluding connectors)

Depth ...................................................105mm

Weight..................................................1200grams

Mounting Details

The AMG unit is supplied with a clip-on mounting bracket which should be attached to a panel or wall

using 2 off 4.0mm screws, see diagram on page 1 for dimensions. The unit is clipped into the

mounting bracket, and is then held firmly in position.

Removal / replacement from / to the Case

Note: - The AMG unit PCB's are static sensitive. Handle with proper care and use normal electrostatic

discharge (ESD) procedures. Use properly grounded protection (for example, wrist straps) when

handling the PCB.

To remove units from the case to access the data expansion boards and the daughter boards, remove

the 2 or 4 fixing screws on the rear panel and slide the PCB's out of the case.

Ensure that the fibres do not snag or get trapped.

To replace the PCB's into the case, slide the PCB's gently into the case aligning the boards with the

appropriate slots. Ensure that the fibre do not snag or get trapped.

Safety

AMG Optical Fibre Products use Class 1 laser systems in accordance with EN 60825-2:2000.

It is always advisable to follow good practice when working with optical fibre systems. This includes:

Do not stare with unprotected eyes or with any unapproved collimating device at fibre

ends or connector faces, or point them at other people.

Use only approved filtered or attenuating viewing aids

For other safety issues and advice on good practice associated with optical fibre systems, please see

EN 60825-2:2000 or your local safety officer.

Maintenance and Repair

There are no user serviceable parts within AMG products. See unit data sheet for full specification.

In case of problem or failure, please call your local support centre or contact: AMG Systems Ltd. at

3 The Omega Centre, Stratton Business Park, Biggleswade, Beds., SG18 8QB, UK.

Phone +44 (0) 1767 600 777

Technical Support +44 (0) 1767 604 491

Email techsupport@amgsystems.com

Inhaltsverzeichnis

Andere AMG Sender Handbücher

AMG

AMG AMG4783B R-SF Series Bedienungsanleitung

AMG

AMG AMG4787R-SF Bedienungsanleitung

AMG

AMG AMG2683 Bedienungsanleitung

AMG

AMG AMG3743E Bedienungsanleitung

AMG

AMG AMG5611R Bedienungsanleitung

AMG

AMG AMG2648 Bedienungsanleitung

AMG

AMG AMG4784R Bedienungsanleitung

AMG

AMG AMG4743-SF Bedienungsanleitung

AMG

AMG AMG5611 Bedienungsanleitung

AMG

AMG AMG6781 Bedienungsanleitung

AMG

AMG AMG5513 Bedienungsanleitung

AMG

AMG AMG5901 Bedienungsanleitung

AMG

AMG AMG4683E Bedienungsanleitung

AMG

AMG AMG4723 Bedienungsanleitung

AMG

AMG AMG4713E Bedienungsanleitung

AMG

AMG AMG3727BE Bedienungsanleitung

AMG

AMG AMG4723-CWDMn-MP Bedienungsanleitung

AMG

AMG AMG4787BER-SF Bedienungsanleitung

AMG

AMG AMG4684B R Series Bedienungsanleitung

AMG

AMG AMG4647BR Bedienungsanleitung

AMG

AMG AMG4781ER-SF Bedienungsanleitung

AMG

AMG AMG4747AG-SF Bedienungsanleitung

AMG

AMG AMG4681R-CWDMn Bedienungsanleitung

AMG

AMG AMG5903A966B9 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung