AMG AMG5513A6B9 Bedienungsanleitung

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 1 of 12

AMG5513A6B9 Instruction Sheet

D17398-00

AMG5513A6B9

Instruction Manual

Transmit Unit with one Bi-directional Data Signal, one Bi-

directional Alarm, one Echelon FTT-10A Data Channel and

one Bi-directional Audio Channel for a Singlemode Fibre

Link

The AMG5513A6B9 is a standalone transmit unit designed to transmit & receive 1 data signal, 1 Bi-

directional alarms plus 1 Echelon FTT10A data channel plus 1 Bi-directional audio channel over one

Singlemode optical fibre.

The AMG5513A6B9 is designed to be powered using an AMG2001 standalone power supply.

The AMG5513A6B9 is designed to operate with an AMG5514A6B9 / AMG5514A6B9R receive unit in

a point to point configuration. The R suffix in the partno. indicates a rackmount configuration.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 2 of 12

AMG5513A6B9 Instruction Sheet

D17398-00

Contents

Introduction 3

Unit Functional Schematic.................................................................................................................. 3

Optical Connection ............................................................................................................................. 3

Connections 4

Optical Connections Singlemode ....................................................................................................... 4

Power Connection .............................................................................................................................. 4

Data and Alarm Channel Connections............................................................................................... 4

Audio Connections ............................................................................................................................. 5

Echelon FTT-10A Data Channel Connection..................................................................................... 5

Front Panel Indicators 6

Power / Opto LED............................................................................................................................... 6

Low Speed Data LEDs ....................................................................................................................... 6

Alarm LEDs......................................................................................................................................... 6

FTT10A LEDs..................................................................................................................................... 6

Audio LEDs......................................................................................................................................... 7

Data and Alarm Channel Configuration 8

Data Channel Configuration ............................................................................................................... 8

Data Interface Connections................................................................................................................ 9

Alarm Channel Configuration ............................................................................................................. 9

FTT10A Interface Connections......................................................................................................... 10

Audio Interface Connections ............................................................................................................ 10

Audio Channel Configuration............................................................................................................ 11

Physical Information 11

Dimensions....................................................................................................................................... 11

Mounting Details............................................................................................................................... 11

Safety 11

Maintenance and Repair 12

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 3 of 12

AMG5513A6B9 Instruction Sheet

D17398-00

Introduction

Unit Functional Schematic

The AMG5513A6B9 transmits 1 data, 1 Bi-

directional alarm, 1 FTT10A and 1 audio

signal to the AMG5514A6B9 receive unit.

It also receives 1 data, 1 Bi-directional

alarm, 1 FTT10A and 1 audio signal

transmitted from the AMG5514A6B9.

Optical Connection

The AMG5513A6B9 connections are illustrated in the following example which shows an

AMG5513A6B9 transmit unit together with an AMG5514A6B9 standalone receive unit configured as a

single channel point to point system.

FTT10A

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 4 of 12

AMG5513A6B9 Instruction Sheet

D17398-00

Connections

Optical Connections Singlemode

No. of Optical Connections..................1

Optical Fibre ........................................Singlemode

Connector ............................................SC/PC

Primary Optical Launch Power............-10dBm

Transmit Wavelength...........................1310nm

Primary Optical Sensitivity...................-30dBm

Receive Wavelength............................1510nm

Minimum Optical Dynamic Range .......20dB.

Power Connection

Connector Type ...................................Removable 2-pin, 3.81mm, Screw Terminal

Connector Partno.................................Phoenix 1803578

Supply Voltage.....................................+12 to +15 Volts DC

Maximum Power..................................5 Watts

Data and Alarm Channel Connections

No. of Integral Data Channels .............1 Selectable RS-232 / RS-422 / RS-485

No. of Alarms.......................................1

Connectors ..........................................Removable 5-pin, 8-pin, 2.5mm, Spring Terminal

Connector Partnos...............................Phoenix 1881354, 1881383

Integral Data Interfaces RS-232, RS-422 or R-S485. Selected by slide switch inside enclosure. *See

appropriate section on how to remove the case for access to the data switches

RS-485 –Switch Position - Top

RS-422 –Switch Position - Middle

RS-232 –Switch Position - Bottom

Alarm Input ..........................................Contact Closure pull-up is 330R to +3V3

Alarm Output........................................Solid-state Relay, maximum 150mA at 125Vac/dc, Ron < 6.5Ω

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 5 of 12

AMG5513A6B9 Instruction Sheet

D17398-00

Audio Connections

No. of Audio Channels ........................1

Connectors..........................................Removable 5-pin, 2.5mm, Spring Terminal

Connector Partno. ...............................Phoenix 1881354

Input level............................................0dBm

Input overload level .............................+6dBm

Input impedance..................................10kΩ / 600Ω

Output impedance...............................600Ω

Frequency response ...........................10Hz to 20KHz

Audio Input impedance is selected by removable jumper JP1 or JP2 on Audio Expansion board inside

enclosure. *See appropriate section on how to remove the case for access to the data/audio switches.

1-2 –High Impedance 10kΩ

2-3 –Balanced 600Ω

Echelon FTT-10A Data Channel Connection

No. of Echelon FTT-10A Data Channels 1

Connectors..........................................Removable 5-pin, 2.5mm, Spring Terminal

Connector Partno. ...............................Phoenix 1881354

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 6 of 12

AMG5513A6B9 Instruction Sheet

D17398-00

Front Panel Indicators

Power / Opto LED

Power / Opto........................................Green - Unit powered, Opto sync.

Red - Unit powered, no Opto sync.

Off - No power applied to unit

Low Speed Data LEDs

Data Present IN (RS485 or RS422) ....Green - logic zero (+V, -V) present on IN+, IN-

Red - logic one (-V,V+) present on IN+, IN-

Off - tri-state off or no connection on IN+, IN-

Data Present IN (RS232).....................Green - logic zero (+V) present on input IN+

Red - logic transitions present on input IN+

Off - logic one (-V) present on input IN+

IN corresponds to the data signals being transmitted onto the optical fibre.

Data Present OUT (RS485 or RS422) Green - logic zero (+V,-V) present on OUT+, OUT-

Red - logic one (-V,+V) present on OUT+, OUT-

Off - tri-state off or no connection on OUT+, OUT-

Data Present OUT (RS232).................Green - logic zero (+V) present on OUT+

Red - logic transitions present on OUT+

Off - logic one (-V) present on OUT+

OUT corresponds to the data signals being received from the optical fibre.

Alarm LEDs

Channel 1

ALARM IN............................................Green - Alarm ON / Contacts closed.

Off - Alarm OFF / Contacts open.

ALARM OUT........................................Green - Alarm ON / Contacts closed.

Off - Alarm OFF / Contacts open.

FTT10A LEDs

Channel 2

FTT10A IN...........................................Green - Data channel present but not transmitting

R/G - Data channel transmitting

Off - Data channel not present or no connection

FTT10A OUT .......................................Green - Data channel present but not transmitting

R/G - Data channel transmitting

Off - Data channel not present or no connection

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 7 of 12

AMG5513A6B9 Instruction Sheet

D17398-00

Audio LEDs

Audio Present TX ................................Green - audio present > -40dBm

Red - audio present > 0dBm (overload at +6dBm)

Off - audio not present or < -40dBm

This represents the audio signals being transmitted on the optical fibre

Audio Present RX................................Green - audio present > -40dBm

Red - audio present > 0dBm (overload at +6dBm)

Off - audio not present or < -40dBm

This represents the audio signals being received from the optical fibre.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 8 of 12

AMG5513A6B9 Instruction Sheet

D17398-00

Data and Alarm Channel Configuration

The AMG5513A6B9 transmit unit sends and receives data to/from an AMG5514A6B9 or rackmount

equivalent AMG5514A6B9R receive unit. The physical data interface RS-485, RS-422 or RS-232 is

selectable by the user with the slide switch mounted on the main PCB inside the enclosure.

Two bi-directional alarms are also provided. Each alarm input is typically connected to a contact

closure switch. An alarm output can receive an on/off signal from an AMG5514A6B9 and is typically

used to convey contact closure status.

Data Channel Configuration

Each low speed data channel provides an RS-232, RS-422 (full duplex, four wire) or RS-485 (half

duplex, two wire) interface defined by the corresponding mode switch inside the enclosure. Every data

channel as shipped from the factory is set up for RS-485 operation unless otherwise requested.

The data input for both the RS-485 and the RS-422 modes detects a tri-state input condition by

monitoring the differential voltage level across the input. A differential level below 600mV positive or

negative will be detected as a tri-state condition. A level above 600mV positive or negative will be

detected as a logic 1 or logic 0 respectively. It is important therefore to terminate the RS-485 bus or

the RS-422 input bus using 120Ω if a pre-bias is present on the RS-485 or RS-422 bus.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 9 of 12

AMG5513A6B9 Instruction Sheet

D17398-00

A large number of third party equipment manufacturers apply a pre-bias on their RS-485 bus. This pre-

bias is applied by pulling one arm of the RS-485 bus high (+5 volts) and the other arm low (0 volts)

using high value resistors within the third party equipment. In order to ensure that the AMG equipment

detects a tri-state condition, then these resistors should have a value above 5kΩ. If the third party

bias resistors are less the 750Ω the bus can be multiple terminated as required to ensure that a tri-

state level is detected.

The system detects a tri-state input condition on the data channel bus when in RS-485 or RS-422

mode.

Data Interface Connections

Connector

Pin No.

Data Channel

RS-485

[switch top]

RS-422

[switch middle]

RS-232

[switch bottom]

IN + (A)

IN - (B)

GND

IN/OUT + (A)

OUT + (A)

IN/OUT - (B)

OUT - (B)

OUT

Note: (A) or (B) in brackets in the above table refers to RS-485 / RS-422 data specification.

Alarm Channel Configuration

The AMG5513A6B9 provides 2 bi-directional contact closure inputs / alarm outputs. Each ALARM IN

input is via an internal 10kΩ series resistor with a 47kΩ pull-up resistor to the internal +3V3 supply.

Each ALARM OUT output can receive an on/off signal from an AMG5514A6B9 and is typically used to

convey contact closure status. Each alarm output is an NPN open collector circuit with a maximum

rated continuous load of 500mA / 24Vdc.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 10 of 12

AMG5513A6B9 Instruction Sheet

D17398-00

Alarm Interface Connections

Connector

Pin No.

Alarm Interface

Alarm IN

Alarm OUT

GND

ALARM IN +

ALARM OUT -

ALARM OUT +

FTT10A Interface Connections

Connector Pin

No.

FTT10A

FTT-10A CH7 NET_B

FTT-10A CH7 NET_A

GND

FTT-10A CH7 NET_B

FTT-10A CH7 NET_A

Audio Interface Connections

Connector Pin

No.

Balanced Input

600Ω

High Z input 10kΩ

OUT -

OUT +

GND

IN +

IN -

GND

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere AMG Sender Handbücher

AMG

AMG AMG4681-1550-C Bedienungsanleitung

AMG

AMG AMG4707A-DR-SF Bedienungsanleitung

AMG

AMG AMG5813R Bedienungsanleitung

AMG

AMG AMG4643-DR-SF Bedienungsanleitung

AMG

AMG AMG4683E Bedienungsanleitung

AMG

AMG AMG3727BE Bedienungsanleitung

AMG

AMG AMG5713A6B9-DIN Bedienungsanleitung

AMG

AMG AMG5613A9R Bedienungsanleitung

AMG

AMG AMG4747AG-SF Bedienungsanleitung

AMG

AMG AMG3747BE Bedienungsanleitung

AMG

AMG AMG4723 Bedienungsanleitung

AMG

AMG AMG4643B E-SF Series Bedienungsanleitung

AMG

AMG AMG5901 Bedienungsanleitung

AMG

AMG AMG4684B R Series Bedienungsanleitung

AMG

AMG AMG4787R-SF Bedienungsanleitung

AMG

AMG AMG5611 Bedienungsanleitung

AMG

AMG AMG4713Bx-SF Bedienungsanleitung

AMG

AMG AMG5615 Bedienungsanleitung

AMG

AMG AMG4783R-SF-CWDMn-C Bedienungsanleitung

AMG

AMG AMG4707 Bedienungsanleitung

AMG

AMG AMG4783RN-CWDMn Bedienungsanleitung

AMG

AMG AMG4743-SF Bedienungsanleitung

AMG

AMG AMG4681R-CWDMn Bedienungsanleitung

AMG

AMG AMG2648 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung