AMG AMG4747AG-SF Bedienungsanleitung

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 1 of 12 AMG4747AG-SF Instruction Sheet

D18961-00.doc

AMG4747AG-SF

Instruction Manual

4 Channel Video Transmit Unit with up to 8 Bi-directional

Data and Audio Channels for a Singlemode Single Fibre

Link

The AMG4747AG-SF is a rackmount four channel video transmit unit designed to transmit 4 video

signals and transmit and receive up to 8 data or audio signals over one Singlemode fibre. The 8

data/audio channel interfaces, whether RS232, RS422, RS485, 20mA, TTL, Contact Closure,

Lonworks or Audio, are defined at manufacture by the addition of daughter boards fitted onto the Data

Expansion Board A.

The AMG4747AG-SF is designed to plug into an AMG2009 or AMG2015 subrack, which in turn fits

into a 19" rack system.

The AMG4747AG-SF is designed to operate with AMG4748A-SF or rackmount equivalent

AMG4748AG-SF four channel video receive unit in a point to point configuration.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 2 of 12 AMG4747AG-SF Instruction Sheet

D18961-00.doc

Contents

Introduction 3

Unit Functional Schematic .................................................................................................................. 3

Optical Connection ............................................................................................................................. 3

Connections 4

Video Input Connections .................................................................................................................... 4

Optical Connections ........................................................................................................................... 4

Power Connection .............................................................................................................................. 4

Data Channel Connections ................................................................................................................. 4

Data and Audio Channel Configuration 5

Data Interface Daughter Board Options ............................................................................................. 5

Data and Audio Channel Configuration .............................................................................................. 5

Daughter Board Layout ...................................................................................................................... 5

Data and Audio Daughter Board Fitting Instruction ............................................................................ 5

Data and Audio Connections .............................................................................................................. 6

Front Panel Indicators 7

Power LED.......................................................................................................................................... 7

Video Input LED’s ............................................................................................................................... 7

Fibre Optic LED’s ............................................................................................................................... 7

Low Speed Data LEDs ....................................................................................................................... 7

Physical Information 9

Dimensions ......................................................................................................................................... 9

Mounting Details ................................................................................................................................. 9

Removal / replacement from / to the Case ......................................................................................... 9

Safety 9

Maintenance and Repair 9

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 3 of 12 AMG4747AG-SF Instruction Sheet

D18961-00.doc

Introduction

Unit Functional Schematic

The

AMG4747AG-SF

transmits up to 4

video and 8 data signals to the

AMG4748A-SF.

It also receives 8 data signal transmitted

from the AMG4748A-SF.

Optical Connection

The AMG4747AG-SF is connected as illustrated below when used with an AMG4748AG-SF receive

unit acting as a point to point system.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 4 of 12 AMG4747AG-SF Instruction Sheet

D18961-00.doc

Connections

Video Input Connections

No. of channels .................................... 4

Connector ............................................ 75 ohm BNC Socket.

Input Impedance .................................. 75 ohm terminated.

Input Level ........................................... 1 volt p-p nominal

Frequency Response ........................... 10Hz to 7MHz.

Optical Connections

PRIMARY OPTO OUT

Connector ............................................ LC/PC

Optical Fibre ........................................ One fibre - Singlemode

Primary Optical Launch Power ............ -5dBm

Wavelength .......................................... 1310nm

Primary Optical Sensitivity ................... -22dBm

Wavelength .......................................... 1310nm

Power Connection

Connector Type ................................... 2.1mm screw lock long power jack – centre positive

Connector Partno. ................................ Switchcraft S761K, AMG G16125-00

Supply Voltage ..................................... 13.5 to 18.0 Volts DC.

Maximum Power ................................. 15 Watts

Data Channel Connections

Total No. of Data Channels ................. 8 channels

Data/Audio Channels – BANK A ......... 8 channels

Data/Audio Channels – BANK B ......... Not Used

Connector ............................................ 37-way D-Type female connector - shielded.

Connections ......................................... See below for connection and configuration

For the data or audio channels to be present, the appropriate data daughter boards have to be fitted

into the data expansion board slots.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 5 of 12 AMG4747AG-SF Instruction Sheet

D18961-00.doc

Data and Audio Channel Configuration

The AMG4748A-SF and rackmount equivalent AMG4748AG-SF sends and receives data in one bank

- Bank A. Bank B is not used. The physical interface is determined by the fitting of AMG data or audio

daughter boards onto the appropriate data expansion board slots.

Data Interface Daughter Board Options

The data interface daughter board options are as follows:

Option Code

'x'

Part No.

Description

0 X12542 4 Wire Audio Interface Daughter Board

1 X04057 RS422/485 Data Interface Daughter Board

2 X04049 RS232 Data Interface Daughter Board

3 X04058 20mA Current Loop Data Interface Daughter Board

4 X12579 TTL Data Interface Daughter Board

5 X12578 Contact Closure Data Interface Daughter Board

6 X13038 FTT10A Echelon Lonworks Data Interface Daughter Board

Data and Audio Channel Configuration

The data expansion board slots are accessed by removing the AMG unit from its case. A data channel

is active when a daughter board is installed in the required data channel slot. Each data interface

board enables one bi-directional channel.

Daughter Board Layout

The channel slots are as follows:

Data and Audio Daughter Board Fitting Instruction

The data and audio daughter boards pushed on to the pin headers mounted on the data expansion

boards. Ensure that the connectors are lined up correctly and not offset before pushing firmly in place.

Note that the data and audio channel numbers are associated with each slot. This allocates the pin

numbers on the rear panel connector together with the front panel LED indicators.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 6 of 12 AMG4747AG-SF Instruction Sheet

D18961-00.doc

Data and Audio Connections

The BANK A data/audio channels pin connections on the rear panel connectors are as follows:

No.

Description

Bank

No.

Description

Bank

1 Audio/Data CH1 IN + (A) A 20 Audio/Data CH1 OUT + (A) A

2 Audio/Data CH1 IN - (B) A 21 Audio/Data CH1 OUT - (B) A

3 Audio/Data CH2 IN + (A) A 22 Audio/Data CH2 OUT + (A) A

4 Audio/Data CH2 IN - (B) A 23 Audio/Data CH2 OUT - (B) A

5 Audio/Data CH3 IN + (A) A 24 Audio/Data CH3 OUT + (A) A

6 Audio/Data CH3 IN - (B) A 25 Audio/Data CH3 OUT - (B) A

7 Audio/Data CH4 IN + (A) A 26 Audio/Data CH4 OUT + (A) A

8 Audio/Data CH4 IN - (B) A 27 Audio/Data CH4 OUT - (B) A

9 GND A 28 GND A

10 GND A 29 GND A

11 GND A 30 Audio/Data CH5 OUT + (A) A

12 Audio/Data CH5 IN + (A) A 31 Audio/Data CH5 OUT - (B) A

13 Audio/Data CH5 IN - (B) A 32 Audio/Data CH6 OUT + (A) A

14 Audio/Data CH6 IN + (A) A 33 Audio/Data CH6 OUT - (B) A

15 Audio/Data CH6 IN - (B) A 34 Audio/Data CH7 OUT + (A) A

16 Audio/Data CH7 IN + (A) A 35 Audio/Data CH7 OUT - (B) A

17 Audio/Data CH7 IN - (B) A 36 Audio/Data CH8 OUT + (A) A

18 Audio/Data CH8 IN + (A) A 37 Audio/Data CH8 OUT - (B) A

19 Audio/Data CH8 IN - (B) A

Note: (A) or (B) in brackets in above table refers to RS485/RS422 data specification not Bank A, B.

See Data or Audio Daughter Board Instruction Sheet for meaning of Audio/Data IN+, Audio/Data IN-

Audio/Data OUT+, and Audio/Data OUT- for each data type.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 7 of 12 AMG4747AG-SF Instruction Sheet

D18961-00.doc

Front Panel Indicators

Power LED

Power .................................................. Green - unit powered

Off - no power applied to unit

Video Input LED’s

Video Present CH1-4 .......................... Green - video signal present on input BNC

R/G - channel present but no video on I/P BNC

Fibre Optic LED’s

Primary Opto Sync TX ......................... Green - optical channel transmitting

Off - optical channel not transmitting

Primary Opto Sync RX ........................ Green - optical channel receiving

Org - optical channel receiving but not sync.

Off - optical channel not transmitting

Low Speed Data LEDs

BANK A (When RS232 data daughter board fitted)

Data Present CH1-8 TX ...................... Green - logic zero (+V) present on IN+

Red - logic transitions present on IN+

Off - logic one (-V) present on IN+

This represents the data signals being transmitted on the optical fibre

Data Present CH1-8 RX ...................... Green - logic zero (+V) present on OUT+

Red - logic transitions present on OUT+

Off - logic one (-V) present on OUT+

This represents the data signals being received on the optical fibre

BANK A (When RS485 / RS422 data daughter board fitted)

Data Present CH1-8 TX ...................... Green - logic zero (+V, -V) present on IN+, IN-

Red - logic transitions present on IN+, IN-

Off - logic one (-V, +V) present on IN+, IN-

This represents the data signals being transmitted on the optical fibre

Data Present CH1-8 RX ...................... Green - logic zero (+V, -V) present on OUT+, OUT-

Red - logic transitions present on OUT+, OUT-

Off - logic one (-V , +V) present on OUT+, OUT-

This represents the data signals being received on the optical fibre

BANK A (When audio daughter board fitted)

Audio Present TX ................................ Green - audio present > -40dBm

Red - audio present > 0dBm (overload at +6dBm)

Off - audio not present or < -40dBm

This represents the audio signals being transmitted on the optical fibre

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 8 of 12 AMG4747AG-SF Instruction Sheet

D18961-00.doc

Audio Present RX ................................ Green - audio present > -40dBm

Red - audio present > 0dBm (overload at +6dBm)

Off - audio not present or < -40dBm

This represents the audio signals being received from the optical fibre.

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 9 of 12 AMG4747AG-SF Instruction Sheet

D18961-00.doc

Physical Information

Dimensions

Height .................................................. 3U Plug-in

Width ................................................... 21HP

Depth ................................................... 170mm excluding connectors

Weight ................................................. 1200grams

Mounting Details

The unit is designed to be mounted within an AMG2009 or AMG2015 Subrack on standard card

guides.

Removal / replacement from / to the Case

Note: - The AMG unit PCB's are static sensitive. Handle with proper care and use normal electrostatic

discharge (ESD) procedures. Use properly grounded protection (for example, wrist straps) when

handling the PCB.

To remove units from the case to access the data expansion boards and the daughter boards, remove

the 2 or 4 fixing screws on the rear panel and slide the PCB's out of the case.

Ensure that the fibres do not snag or get trapped.

To replace the PCB's into the case, slide the PCB's gently into the case aligning the boards with the

appropriate slots. Ensure that the fibre do not snag or get trapped.

Safety

AMG Optical Fibre Products use Class 1 laser systems in accordance with EN 60825-2:2000.

It is always advisable to follow good practice when working with optical fibre systems. This includes:

 Do not stare with unprotected eyes or with any unapproved collimating device at fibre

ends or connector faces, or point them at other people.

 Use only approved filtered or attenuating viewing aids

For other safety issues and advice on good practice associated with optical fibre systems, please see

EN 60825-2:2000 or your local safety officer.

Maintenance and Repair

There are no user serviceable parts within AMG products. See unit data sheet for full specification.

In case of problem or failure, please call your local support centre or contact: AMG Systems Ltd. at

3 The Omega Centre, Stratton Business Park, Biggleswade, Beds., SG18 8QB, UK.

Phone +44 (0) 1767 600 777

Technical Support +44 (0) 1767 604 491

Email techsupport@amgsystems.com

AMG Systems Ltd. reserves the right to make changes to this

document without notice. The information herein is believed to

be accurate. No responsibility is assumed by AMG for its use.

Page 10 of 12 AMG4747AG-SF Instruction Sheet

D18961-00.doc

This page is intentionally blank.

Inhaltsverzeichnis

Andere AMG Sender Handbücher

AMG

AMG AMG4783RN-CWDMn Bedienungsanleitung

AMG

AMG AMG4687BER Bedienungsanleitung

AMG

AMG AMG4713E Bedienungsanleitung

AMG

AMG AMG5913-2A9R Bedienungsanleitung

AMG

AMG AMG3741G-DR-SF Bedienungsanleitung

AMG

AMG AMG5611 Bedienungsanleitung

AMG

AMG AMG5713A6B9-HP Bedienungsanleitung

AMG

AMG AMG4723 Bedienungsanleitung

AMG

AMG AMG5513A6B9 Bedienungsanleitung

AMG

AMG AMG5903A966B9 Bedienungsanleitung

AMG

AMG AMG4707AG-DR-SF Bedienungsanleitung

AMG

AMG AMG4687BE Bedienungsanleitung

AMG

AMG AMG4681-1550-C Bedienungsanleitung

AMG

AMG AMG2648 Bedienungsanleitung

AMG

AMG AMG4684B R Series Bedienungsanleitung

AMG

AMG AMG2683 Bedienungsanleitung

AMG

AMG AMG4707AEG Bedienungsanleitung

AMG

AMG AMG4627B Bedienungsanleitung

AMG

AMG AMG5803A966G-DF Bedienungsanleitung

AMG

AMG AMG4743-SF Bedienungsanleitung

AMG

AMG AMG4683ER Bedienungsanleitung

AMG

AMG AMG4787R-SF Bedienungsanleitung

AMG

AMG AMG5615 Bedienungsanleitung

AMG

AMG AMG3743E Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung