AMP Lighting HydraPro AUL-8001-25-B-BZ Bedienungs- und Sicherheitshinweise

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP® HydraProTM LED Underwater Light

AUL-8001-25-B-BZ (Constant Output)

AMP®HydroProTM LED Underwater Light

AUL-8001-25-B-BZ

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

Important Safety Instructions: Read Before Installation

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

[email protected] • 813.978.3900

–3–

Important Safety Instructions: Read Before Installation

“WARNING-RISK OF ELECTRIC SHOCK”

1. Use only in ponds and small decorative fountains

where persons will immerse no more then their

hands and lower arms while the product is

energized.

2. DO NOT use in water intended for swimming,

wading, immersion or bathing.

3. All installer completed cable connections must be

located outside of pond or fountain.

4. Low voltage circuit must be supplied by a power

unit marked as suitable for supplying submersible

luminaries.

5. Power until must be supplied by a circuit protected

by a ground fault circuit interrupter (GFCI).

6. “Maximum depth: 18in (450 mm)”.

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

AMP®HydroProTM LED Underwater Light

AUL-8001-25-B-BZ

Package Contents

A. (1) Fixture

Parts (sold separately)

A. (3) Mounting Screws

B. (3) Flat Washers

A. (3) Anchors

Product Dimensions

5”

4”

5”

[email protected] • 813.978.3900

–5–

INSTALLATION & MAINTENANCE GUIDE

AMP®HydroProTM LED Underwater Light

AUL-8001-25-B-BZ

Install Horseshoe Mount

Wire Connection

Anchor

Horseshoe

Mount

Mounting

Screw

Washer

Place the horseshoe mount on the

desired location and mark (3) points

for the anchors from the holes on the

horseshoe mount.

Drill proper holes on the location and

insert anchors into the drilled holes.

Attach the horseshoe mount onto

the anchors. Pass the washers over

the mounting screws and thread the

mounting screws into the anchors to

secure the horseshoe mount. Hand

tighten until snug with a screwdriver.

NOTE: SOME APPLICATIONS ARE NOT

SUITABLE FOR PERMANENT MOUNTING AND

DO NOT REQUIRE OR WARRANT THE USE OF

SCREWS AND ANCHORS

Strip both leads from the luminaire pigtail. Using two wire connectors

(sold separately), connect the leads from the luminaire to the main supply

cable leads.

Adjust the housing to your desired direction by using the lock nuts on the

side of the housing.

Thumb Screw

Wire Connector

Main Supply Wire

Pigtail

Housing

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

Install/Replace Glare Guard

AMP®HydroProTM LED Underwater Light

AUL-8001-25-B-BZ

Remove Ring

Loosen the screws on the

faceplate and remove the

faceplate from the housing.

Screw

Faceplate

Housing

Install Glare Guard

Housing

Install the glare guard onto the

housing and secure it with the screws

previously removed, tightening them in

a star pattern.

Screw

Glare Guard

–6––6–

[email protected] • 813.978.3900

–7–

IS-AUL-8001-25-B-BZ-ver1.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

Inhaltsverzeichnis

Andere AMP Lighting Landschaftsbeleuchtung Handbücher

AMP Lighting

AMP Lighting PinnaclePro AAL-1016-40-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AviatorPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3012-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AMP RGBW Max PinnaclePro LED Spotlight Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3011-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AWL-710IR-X-BBZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4015-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3015-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PAR36 Well Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3032-26-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting NovelPro APL-3021-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PinnaclePro AAL-1017-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting BulletPro MR8 Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AggregatePro AAL-1013 B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Sol Box Brass ASDL-2014-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PillarPro APL-3019-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting TieredPro Path Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting Wider NovellePro APL-3026-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting VAC-ZWM1-BBZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting BeaconPro Path & Area Light Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-30XXIR Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AtomPro Mini LED Spotlight Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ONE HydraPro AWL-700IR-25-BBZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PinnaclePro APL-3017-4 Series Bedienungs- und Sicherheitshinweise

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung

LIGMAN

LIGMAN VIENNA 1 Bedienungsanleitung