AMP Lighting AAL-1024-0-B-BZ Bedienungs- und Sicherheitshinweise

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP®Low Voltage Landscape Lighting

AMP® Stem with Integrated Hub

AAL-1024-0-B-BZ

AMP®Stem with Integrated Hub Top

ASM-2408-0-B-BZ

INSTALLATION & MAINTENANCE GUIDE

www.amplighting.com

–2–

Important Safety Instructions: Read Before Installation

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

[email protected] • 813.978.3900

Product Dimensions

–3–

Package Contents

A. (1) Fixture Body

B. (1) Integrated Hub Top

1”

4”

22”

2.83”

There are two types of mounts that are sold separately for this xture, the

Stake Mount and Surface Mount.

INSTALLATION & MAINTENANCE GUIDE

–4–

www.amplighting.com

–4–

AMP®Stem with Integrated Hub Top

ASM-2408-0-B-BZ

Wire Connection

Install Stake

Option 1: Stake Mount

Insert the main supply wire continuation (if needed) and the main

supply wire up through the bottom of the stake mount and strip the

ends of both sets of supply wires.

Attach the xture wires and both sets of the main supply wires to their

correct connectors in the integrated hub top.

Once the wires are installed properly, thread the integrated hub top

back onto the stake mount and hand tighten until snug.

Integrated Hub Top

Main Supply Wires

Fixture Wires

Connectors

Stake Mount

Main Supply Wire

Continuation

Determine the desired location

for mounting the stake mount.

Hammer the stake into the

ground until ange of stake is

ush to grade. To avoid damage

to the stake, place a board

on top of the stake while

hammering.

Note: If the ground is hard and

the stake is difcult to install,

make a crosscut in the ground

using a at shovel.

Board

Ground

Soil

Stake

[email protected] • 813.978.3900

–5–

INSTALLATION & MAINTENANCE GUIDE

AMP®Stem with Integrated Hub Top

ASM-2408-0-B-BZ

Install Stake Mount

Clear away an area in the

ground at the wireway slot on

top of the stake. Lay the supply

wires into the wireway slot and

screw the stake mount on to

the stake. Tighten until snug.

Stake Mount

Ground

Supply Wires

Wireway Slot

Soil

Stake

INSTALLATION & MAINTENANCE GUIDE

–6–

www.amplighting.com

–6–

AMP®Stem with Integrated Hub Top

ASM-2408-0-B-BZ

Wire Connection

Option 2: Surface Mount

Insert the main supply wire continuation (if needed) and the main

supply wire up through the bottom of the surface mount and strip the

ends of both sets of supply wires.

Attach the xture wires and both sets of the main supply wires to their

correct connectors in the integrated hub top.

Once the wires are installed properly, thread the integrated hub top

back onto the surface mount and hand tighten until snug.

Integrated Hub Top

Main Supply Wires

Fixture Wires

Connectors

Surface Mount

Main Supply Wire

Continuation

Install Surface Mount

Place the surface mount onto

the desired location and secure

it with the screws. Tighten with

a screwdriver.

Screw

Optional Anchor

Surface Mount

Washer

–6––6–

[email protected] • 813.978.3900

–7–

INSTALLATION & MAINTENANCE GUIDE

AMP®Stem with Integrated Hub Top

ASM-2408-0-B-BZ

Bulb Installation

Remove Stem Top

Twist the stem top counter- clock-

wise and remove it from the stem.

Stem Top

Stem

Install Bulb

Insert the bulb with the correct watt-

age and type marked on the xture

label and push rmly into place.

CAUTION: Do not exceed

maximum wattage marked on

luminaire label.

Socket

Bulb

INSTALLATION & MAINTENANCE GUIDE

AMP®Stem with Integrated Hub Top

ASM-2408-0-B-BZ

www.amplighting.com

–8–

Install Stem Top to Stem

Place the stem top over the

bulb and twist it clockwise

onto the stem.

Stem Top

Stem

Install Cast Brass Hat to Stem (Option A)

Thread the hat of your choice

onto the stem top. Hand tighten

until snug.

Note: For Cast Brass AMP®hats

you will not need a nial to install

the hat. You will screw the hat

directly to the top of the stem.

Stem Top

Hat of your choice

INSTALLATION & MAINTENANCE GUIDE

AMP®Stem with Integrated Hub Top

ASM-2408-0-B-BZ

[email protected] • 813.978.3900

–9–

Install Spun Brass Hat to Stem (Option B)

Place the hat of your choice onto

the stem top and secure it with

the nial. Hand tighten until snug.

Shield

Finial

Hat of your choice

INSTALLATION & MAINTENANCE GUIDE

AMP®Stem with Integrated Hub Top

ASM-2408-0-B-BZ

www.amplighting.com

–10–

Install/Replace Bulb

Remove the hat and stem top to expose the bulb and replace it

with the correct wattage and type marked on the xture label. Then,

reinstall the stem top and hat.

IMPORTANT: Bulbs must be protected from moisture and dust at all

times. Always reinstall the stem top and hat when removed.

Andere Handbücher für AAL-1024-0-B-BZ

Inhaltsverzeichnis

Andere AMP Lighting Landschaftsbeleuchtung Handbücher

AMP Lighting

AMP Lighting ADL-2010 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting TuscanPro APL-3026-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-401-LI-A-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASPL-3028 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASPL-3030-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-40 LI-B-BZ Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ONE ControlPro AAL-1813IR-40-BBZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting EscherPro MR11 Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting DecoPro ADL-2012-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting 3601 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting EscherPro AAL-1023 Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4015-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PolynesianPro Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-30XXIR Series Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting VAC-ZWM1-BBZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PetalPro APl-3033-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting PinnaclePro AAL-1017-4-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting APL-3031-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ASAL-1025-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ONE HydraPro AWL-700IR-25-BBZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting VariantPro AAL-1028-0-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting ShellPro APL-3034-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AAL-1024-0-B-BZ Bedienungs- und Sicherheitshinweise

AMP Lighting

AMP Lighting AFL-4010-4-B-BZ Bedienungs- und Sicherheitshinweise

Beliebte Landschaftsbeleuchtung Handbücher anderer Marken

Intex

Intex SL1006 Bedienungsanleitung

LED Group

LED Group ROBUS R2IN13W Bedienungsanleitung

Patriot Lighting

Patriot Lighting 343-1484 Bedienungsanleitung

LIGMAN

LIGMAN JET 44 Bedienungsanleitung

Hess

Hess SERA G: SERA S Bedienungsanleitung

LIGMAN

LIGMAN MALTA 1 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Invue 42 - 175W Bedienungsanleitung

Saxby Lighting

Saxby Lighting Islay 68784 Handbuch

LIGMAN

LIGMAN EU-10016-3 Bedienungsanleitung

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Bedienungsanleitung

LIGMAN

LIGMAN KI-60475 Bedienungsanleitung

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Bedienungsanleitung

Malibu Boats

Malibu Boats CL905K Bedienungsanleitung

LIGMAN

LIGMAN NYB-30161 Bedienungsanleitung

LIGMAN

LIGMAN SI-80021 Bedienungsanleitung

Volt

Volt 2-in-1 Tiki-Brass Torch Light Bedienungsanleitung

Malibu Boats

Malibu Boats CM110P Bedienungsanleitung

LIGMAN

LIGMAN VIENNA 1 Bedienungsanleitung