Anritsu MS2690A Bedienungsanleitung

Document No.: M-W2855AE-47.0

ANRITSU CORPORATION

•

For safety and warning information, please read this

manual before attempting to use the equipment.

•

Additional safety and warning information is provided

within the MS2690A/MS2691A/MS2692A Signal

Analyzer Operation Manual (Mainframe Operation),

MS2830A Signal Analyzer Operation Manual

(Mainframe Operation) or MS2840A Signal Analyzer

Operation Manual (Mainframe Operation). Please also

refer to this document before using the equipment.

•

Keep this manual with the equipment.

MS2690A/MS2691A/MS2692A

and MS2830A/MS2840A

Signal Analyzer

Operation Manual

Spectrum Analyzer Function

Remote Control

47th Edition

Safety Symbols

To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the

following safety symbols to indicate safety-related information. Ensure that you clearly understand the meanings of

the symbols BEFORE using the equipment. Some or all of the following symbols may be used on all Anritsu

equipment. In addition, there may be other labels attached to products that are not shown in the diagrams in this

manual.

Symbols used in manual

This indicates a very dangerous procedure that could result in serious injury or

death if not performed properly.

This indicates a hazardous procedure that could result in serious injury or death if

not performed properly.

This indicates a hazardous procedure or danger that could result in light-to-severe

injury, or loss related to equipment malfunction, if proper precautions are not taken.

Safety Symbols Used on Equipment and in Manual

The following safety symbols are used inside or on the equipment near operation locations to provide information

about safety items and operation precautions. Ensure that you clearly understand the meanings of the symbols and

take the necessary precautions BEFORE using the equipment.

This indicates a prohibited operation. The prohibited operation is indicated

symbolically in or near the barred circle.

This indicates an obligatory safety precaution. The obligatory operation is

indicated symbolically in or near the circle.

This indicates a warning or caution. The contents are indicated symbolically in or

near the triangle.

This indicates a note. The contents are described in the box.

These indicate that the marked part should be recycled.

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer

Operation Manual Spectrum Analyzer Function Remote Control

19 April 2007 (First Edition)

20 October 2016 (47th Edition)

publisher.

The contents of this manual may be changed without prior notice.

Printed in Japan

DANGER

WARNING

CAUTION

iii

Notes On Export Management

This product and its manuals may require an Export License/Approval by

the Government of the produc

t's country of origin for re-

export from your

country.

Before re

exporting the product or manuals, please contact us to confirm

whet

her they are export-controlled items or not.

When you dispose of export

controlled items, the products/manuals need

to be broken/shredded so as not to be unlawfully used for military purpose.

About This Manual

Operation manual configuration

The operation manual configuration of the MS2690A/MS2691A/MS2692A

and MS2830A/MS2840A Signal Analyzer is shown below.

MS2690A/MS2691A/MS2692A Signal Analyzer Operation Manual

(Main Frame Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer Operation Manual (Phase Noise Measurement Function Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer Operation Manual (Phase Noise Measurement Function Remote Control)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer Operation Manual (Main Frame Remote Control)

MS2840A Signal Analyzer Operation Manual

(Main Frame Operation)

MS2830A Signal Analyzer Operation Manual

(Main Frame Operation)

MS2690A/MS2691A/MS2692A

Signal Analyzer Operation Manual

(Signal Analyzer Function

Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer Operation Manual (Signal Analyzer Function Remote Control)

MS2830A/MS2840A

Signal Analyzer Operation Manual

(Signal Analyzer Function

Operation)

MS2690A/MS2691A/MS2692A

Spectrum Analyzer Operation Manual

(Spectrum Analyzer Function

Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer Operation Manual (Spectrum Analyzer Function Remote Control)

MS2830A/MS2840A

Spectrum Analyzer Operation Manual

(Spectrum Analyzer Function

Operation)

•Signal Analyzer Operation Manual (Mainframe Operation)

•Signal Analyzer Operation Manual (Mainframe Remote Control)

Description of basic operations, maintenance procedures, common

functions and common remote functions of the mainframe

•Signal Analyzer Operation Manual (Signal Analyzer Function)

•Signal Analyzer Operation Manual (Signal Analyzer Function Remote

Control)

Description of basic operations, functions and remote functions of the

signal analyzer

•Signal Analyzer Operation Manual (Spectrum Analyzer Function)

•Signal Analyzer Operation Manual (Spectrum Analyzer Function Remote

Control) <This document>

Description of basic operations, functions and remote functions of the

spectrum analyzer

•Signal Analyzer Operation Manual (Phase Noise Measurement Function)

•Signal Analyzer Operation Manual (Phase Noise Measurement Function

Remote Control)

Description of basic operations, functions and remote functions of the

Phase Noise

Convention Used in This Manual

Except where there is a good reason to do otherwise, this manual

assumes the use of MS269xA.

Note that the descriptions in this manual also apply to MS2830A or

MS2840A.

III

Table of Contents

About This Manual....................................... I

Chapter 1 Overview ................................... 1-1

1.1 Overview .................................................................... 1-2

Chapter 2 SCPI Device Message Details.. 2-1

2.1 Frequency/Span......................................................... 2-32

2.2 Level .......................................................................... 2-55

2.3 RBW/VBW ................................................................. 2-77

2.4 Marker........................................................................ 2-100

2.5 Signal Search............................................................. 2-163

2.6 Trace.......................................................................... 2-183

2.7 Sweep/Trigger/Gate................................................... 2-247

2.8 Measure Function ...................................................... 2-320

2.9 ACP............................................................................ 2-348

2.10 Burst Average Power................................................. 2-444

2.11 Channel Power .......................................................... 2-477

2.12 OBW .......................................................................... 2-527

2.13 Spectrum Emission Mask .......................................... 2-574

2.14 Spurious Emission Measurement Function ............... 2-711

2.15 Setting the TOI Measurement Functions ................... 2-821

2.16 Internal Signal Generator Control function ................ 2-849

2.17 Configuring Batch Measurement Settings ................. 2-856

2.18 Other Settings ............................................................ 2-949

2.19 QUEStionable Status Register .................................. 2-962

2.20 OPERation Status Register ....................................... 2-977

2.21 Setting External Mixer................................................ 2-986

2.22 Setting Save on Event ............................................... 2-1007

2.23 Setting Noise Floor Reduction ................................... 2-1014

IV.

Chapter 3 Native Device Message List..... 3-1

3.1 IEEE488.2 Common Device Messages .................... .. 3-3

3.2 Application Common Device Messages .................... .. 3-5

3.3 Frequency/Span Settings .......................................... .. 3-7

3.4 Level Settings ............................................................ .. 3-8

3.5 RBW/VBW Settings ................................................... .. 3-9

3.6 Marker Settings.......................................................... 3-10

3.7 Signal Search Settings .............................................. 3-13

3.8 Trace Settings............................................................ 3-15

3.9 Sweep/Trigger/Gate Settings..................................... 3-18

3.10 Measure Function Settings ........................................ 3-23

3.11 Batch Measure Function Settings.............................. 3-52

3.12 Reference Signal Settings ......................................... 3-54

3.13 Other Settings ............................................................ 3-55

3.14 Setting External Mixer................................................ 3-56

Chapter 4 Native Device Message

Details ....................................... 4-1

Chapter 1 Overview

1-1

Overview

This chapter provides an overview of the remote control of the Spectrum

Analyzer function (hereinafter, referred to as “this application”).

1.1 Overview ....................................................................... 1-2

Chapter 1Overview

1-2.

1.1 Overview

Automatic measurement can be performed by using this instrument in

connection with an external controller (PC). This instrument is standard

equipped with GPIB, Ethernet, and USB interfaces. You can also select a

remote control command from the SCPI mode, which is a command

format defined by the SCPI Consortium, and Native mode, which is our

unique format.

See the

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A Signal

Analyzer Operation Manual (Mainframe Remote Control)

for how to

switch the language mode.

You can use the Native mode by converting SCPI commands into Native

ones. See the

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer Operation Manual (Mainframe Remote Control)

for

details.

Andere Handbücher für MS2690A

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Anritsu Messgerät Handbücher

Anritsu

Anritsu MT9083B2 Bedienungsanleitung

Anritsu

Anritsu AM-9000 Series Bedienungsanleitung

Anritsu

Anritsu VNA Master MS203 A Series Bedienungsanleitung

Anritsu

Anritsu MS2665C Bedienungsanleitung

Anritsu

Anritsu VectorStar ME7838 4X Series Bedienungsanleitung

Anritsu

Anritsu MT8220A Bedienungsanleitung

Anritsu

Anritsu Spectrum Master MS2711D Bedienungsanleitung

Anritsu

Anritsu ML2437A Betriebsanleitung

Anritsu

Anritsu VNA Master MS202 B Series Bedienungsanleitung

Anritsu

Anritsu Spectrum Master MS2711D Bedienungsanleitung

Anritsu

Anritsu Site Master S331L Bedienungsanleitung

Anritsu

Anritsu VectorStar ME7838E4X Bedienungsanleitung

Anritsu

Anritsu G0430A Bedienungsanleitung

Anritsu

Anritsu MS2687B Bedienungsanleitung

Anritsu

Anritsu MS2690A Installationshandbuch

Anritsu

Anritsu VectorStar ME7838D4 Bedienungsanleitung

Anritsu

Anritsu Network Master MU909020A Bedienungsanleitung

Anritsu

Anritsu MS2830A Bedienungsanleitung

Anritsu

Anritsu Field Master Pro MS2090A Bedienungsanleitung

Anritsu

Anritsu MP1632C Bedienungsanleitung

Anritsu

Anritsu MS2690A Bedienungsanleitung

Anritsu

Anritsu SQA-R MP1900A Bedienungsanleitung

Anritsu

Anritsu MT8820C Bedienungsanleitung

Anritsu

Anritsu MP1220A Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung