Antari W-715 Fog Jet Bedienungsanleitung

W-715

Fog Jet User Manual

English Français Deutsch

• • •

中文

English User Manual

Safety Information

Please read the following safety information carefully before operating the

machine. Information includes important safety information about installation,

usage, and maintenance. Pay attention to all warning labels and instructions in

this manual and printed on the machine.

If you have questions about how to operate the machine safely, please contact your local

Antari dealer for help.

Keep this device dry.

Always connect to a grounded circuit to avoid risk of electrocution.

Before connecting the machine to power, always check the voltage indicated on the

machine matches to your local AC voltage. Do not use the machine if the AC power

voltage does not match.

Disconnect the machine from AC power before servicing and when not in use.

This product is for indoor use only! Do not expose to rain or moisture. If fluid is

spilled, disconnect AC power and clean with a damp cloth. If fluid is spilled onto

electronic parts, immediately unplug the machine and contact your local Antari

dealer for advice.

No user serviceable and modifiable parts inside. Never try to repair this product, an

unauthorized technician may cause damage or malfunction.

For adult use only. Never leave the machine running unattended.

Position the machine in a well-ventilated area. Please leave about 50 cm of space

around the machine.

Never add flammable liquid of any kind to the machine.

Make sure there are no flammable materials close to the machine while operating.

Only use Antari fluid. Other fluid may lead to a heater clog and malfunction.

If the machine fails to work, unplug the machine and stop operation immediately.

Contact your local Antari dealer for assistance.

Before transporting the machine, make sure the fluid tank is completely drained.

Fog fluid may present health risks if swallowed. Do not drink fog fluid. Store it

securely. In case of eye contact or if fluid is swallowed immediately look for medical

advice.

Unpacking and Inspection

Immediately upon receiving the machine, carefully unpack the carton, check all content to

ensure that all parts are present and have been received in good condition. If any parts

appear damaged or mishandled from shipping, notify the shipper immediately and retain the

packing material for inspection.

What is included: 1 x W-715 Fogger

1 x Power Cord

1 x User Manual

1 x W-1 Wireless Transmitter (excluded in W-715X)

Product Overview

②

③

④

⑤

⑥

⑦

①

⑧

（1） Handle

（2） Wireless Receiver

（3） DMX 3-Pin

（4） DMX 5-Pin

（5） Power Input

（6） Breaker

（7） LCD Control Panel

（8） Tank Cap （Group）

Setting Up

Step 1: Place the machine on a flat surface and in a suitably large area with at least 50 cm

of open space at each side of the machine and 5 meters for the output direction of the

machine.

Step 2: Fill the fluid tank with Antari FLC fog fluid.

Step 3: Connect the machine to suitably rated power supply. To determine the power

requirement for the machine refer to the label on the back of the machine.

Always connect the machine to a protected circuit and ensure it is properly

grounded to avoid risk of electrocution.

Step 4: Turn on the machine by connecting the power cord and turning the Neutrik

Powercon. Heat-up takes approximatley 9 minutes. Once the machine has reached

operating temperature, the LCD screen will display “Ready To Fog”. Now the machine is

ready for operation.

Step 5: To turn off the machine, turn the Neutrik Powercon again.

Language Setting

To switch the language used for the control interface, press the [Menu] button BEFORE

turning on the machine and HOLD it until the LCD screen flashes twice. After the two flashes,

press [Menu] to choose the language: English and 中文 (Chinese).

Operation

Control Panel

The machine can be operated with the LCD control panel located on top of the fogger.

Button Function

[Menu] Select from functions

[

▲

/ Timer] To increase value or choose from options

To activate Timer Mode

[

▼

/ Volume]

To decrease value or choose from options

To active Volume Mode

To emit fog under 2-Second Jet Mode

[Stop] To stop output or go back to main screen

Functions Value Description

Interval Set 10-300 Seconds

Interval time under Timer Mode

Duration Set 2-15 Seconds Duration time under Timer Mode

Timer Output 50-100% Output volume under Timer Mode

Volume Output 50-100% Output volume under Volume Mode

2-Second Jet Mode On/Off Activate or deactivate 2-Second Jet Mode

DMX512 Address 1-512 Setting the DMX address

Wireless Control Mode On/Off Activate or deactivate Wireless Control Mode

Quick Start Mode On/Off Activate or deactivate Quick Start Mode

Timer Operation

To operate the machine in Timer Mode, interval, duration time and output volume under

Timer Mode must be set first:

Interval Time Setup - Press the [Menu] button until the LCD screen displays “Interval Set”

and then press the ▲or ▼button to set the interval time from 10-300 seconds.

Duration Time Setup - Press the [Menu] button until the LCD screen displays “Duration

Set”and press the ▲or ▼button to set the duration time from 2-15 seconds.

Output Volume Setup - Press [Menu] until the LCD screen displays “Timer Output”and

press the ▲or ▼button to set the output percentage from 50-100%.

After finishing the above setting, go back to the main screen by pressing the [Stop] button.

To activate Timer Mode, press the [Timer] button below the display. To deactivate Timer

Mode, press [Stop] button.

Volume Operation

To operate the machine in Volume Mode, the output volume under Volume Mode must be

set first:

Output Volume Setup - Press the [Menu] button until the LCD screen displays “Volume

Output”and then press the ▲or ▼button to set the output percentage from 50-100%.

After finishing the above setting, go back to the main screen by pressing the [Stop] button.

To activate Volume Mode, press the [Volume] below the display. To deactivate Volume

Mode, press the [Stop] button.

Note: In Volume Mode, the machine emits fog continuously until a re-heat is needed.

2-Second Jet Operation

To activate 2-Second Jet Mode, press the [Menu] button until the LCD screen displays

“2-Second Jet Output”and then press the ▲or ▼button to activate or deactivate

2-Second Jet Mode. Once the 2-Second Jet Mode is activated, the main screen will keep

showing “2-Sec Jet Mode”. Press the [Volume] button and the fog will be emitted for 2

seconds with maximum output (100%).

DMX Operation

Making the DMX Connection – Connect machine to a DMX controller or to one of the

machines in the DMX chain. The machine uses an 3-pin and 5-pin XLR connector for DMX

connection, the connector is located on the rear of the machine.

Address Setup – Press [Menu] until the LCD screen displays “DMX512 Add:” and then press

▲

the

▼

or button to set the DMX address from 1-512.The machine occupies 1 control

channel. The starting address is defined as the first channel from which the machine will

respond to the controller. Always double check to make sure there are no overlapping

channles in order to control the machine correctly.

DMX Channel Function

Channel DMX Value Range Function

0 – 5 Fog Off

6 –255

Fog Output 50 –100%

Fog Output 100% for 2 seconds

(under 2-Second Jet Mode)

DMX Connector Pin Assignment

The machine provides 3- and 5-pin XLR connector for DMX connection. The diagram below

indicates pin assignment information.

Pin Function

1 Ground

2 Data-

3 Data+

4 N/A

5 N/A

Wireless Remote Control Operation (Not applicable for W-715X)

The wireless remote control system consists of a transmitter equipped with two buttons for

on and off functions and a receiver pre-attached to the rear of the machine.

*Transmitter

With the transmitter it is possible to emit fog via radio signal at maximum distance of 50

meters. Press the button “A” or “B”, to emit fog.

*Receiver

The receiver is tested and pre-attached to the rear of the machine. The included transmitter

has been registered to the machine before shipping.

To activate or deactivate the wireless remote control function, press [Menu] until the LCD

▲

displays “Wireless”. Then press the

▼

or button to activate or deactivate the wireless

remote control function. When the wireless remote control function is activated, the LCD

screen will display “Wireless Detect …” for 15 seconds. During this time, wireless

transmiter(s) must be registered by pressing either button A or B on the transmitter(s). The

button used (A or B) for registration will be the button for fog emission in wireless remote

control mode.

Notes:

1. Once the wireless remote control function is activated, the letter “W”will be displayed

on the LCD screen.

2. Once the wireless remote control function is activated, the LCD screen will display

“Wireless Detect …” each time the machine is turned on; this allows new registration.

Every new registration overwrites the previous memory.

3. One machine can be controlled by up to 5 transmitters while one transmiter can be

registered to an unlimited number of machines.

4. Battery used in transmiter: type A27S 12V.

5. In 2-Second Jet Mode, pressing the button (A or B) on the transmitter will emit fog for 2

seconds with maximium output (100%).

Power Saving

Keep pressing the [Stop] button for 3 seconds; the LCD screen will display a

countdown of 60 seconds. After the countdown, the machine will go into sleep

mode. To wake up the machine again, press any button.

When the machine is idle for 15 seconds, the backlight of the LCD screen becomes

dim. To light up again the LCD screen, press any button.

When DMX connector is disconnected from the machine, the machine will go into

sleep mode, and when the DMX connector is re-connected to the machine again,

the machine will be woken up.

Fluid

Only use Antari FLC water-based fluid for the W-715 Fogger. The machine is tested and

calibrated with this fluid to achieve the best output performance. Warranty will be voided if

any other type of liquid is used, improper use of liquid may lead to machine failure and

malfunction.

Service and Maintenance

Do not allow the machine to become contaminated.

Remove dust from air vents with air compressor, vacuum or a soft brush.

Inhaltsverzeichnis

Sprachen:

Andere Antari Nebelmaschine Handbücher

Antari

Antari Z-380 Bedienungsanleitung

Antari

Antari DNG-200 Bedienungsanleitung

Antari

Antari Z-3000II Bedienungsanleitung

Antari

Antari HZ-350 Bedienungsanleitung

Antari

Antari II Series Bedienungsanleitung

Antari

Antari Z-1500II Bedienungsanleitung

Antari

Antari HZ-100 Bedienungsanleitung

Antari

Antari F-1 Fazer Bedienungsanleitung

Antari

Antari Z-1500 III Bedienungsanleitung

Antari

Antari DNG-250 Bedienungsanleitung

Antari

Antari Z-1200II Bedienungsanleitung

Antari

Antari WiFi-800 Bedienungsanleitung

Antari

Antari HZ-500 Bedienungsanleitung

Antari

Antari F-80ZY Bedienungsanleitung

Antari

Antari W-508 Bedienungsanleitung

Antari

Antari B-100 Bedienungsanleitung

Antari

Antari Z Series Bedienungsanleitung

Antari

Antari W-508 Bedienungsanleitung

Antari

Antari F-7X Bedienungsanleitung

Antari

Antari F-1 Fazer Bedienungsanleitung

Antari

Antari M-5 Bedienungsanleitung

Antari

Antari Z-80 Bedienungsanleitung

Antari

Antari DNG250FE Bedienungsanleitung

Antari

Antari M-1 Bedienungsanleitung

Beliebte Nebelmaschine Handbücher anderer Marken

Boost

Boost BOOST-FOG400LED-BK Bedienungsanleitung

Home Accents Holiday

Home Accents Holiday FM1000-ASH Bedienungsanleitung

EuroLite

EuroLite ZEITGEIST FOG-1200 Bedienungsanleitung

Dyna-Fog

Dyna-Fog CYCLONE ULTRA 2734 Bedienungsanleitung

PROEL

PROEL DRAGO HEAVY PLFD150HY Bedienungsanleitung

Sparklyn

Sparklyn Y846 Bedienungsanleitung

Magicfx

Magicfx CO2 Gun Bedienungsanleitung

Ibiza

Ibiza LSM500LAS Bedienungsanleitung

Venue Lighting Effects

Venue Lighting Effects ULTRA MINI-FOGGER Bedienungsanleitung

High End

High End F-100 Bedienungsanleitung

Chauvet

Chauvet ARENA 2100 FLEX Bedienungsanleitung

Beamz

Beamz F1600 Bedienungsanleitung

Sagitter

Sagitter SG ARS900C Bedienungsanleitung

KISANKRAFT

KISANKRAFT KK-STF-480 Bedienungsanleitung

Orion

Orion OT-U250PP Leitfaden

Beamz

Beamz S2500 Bedienungsanleitung

American DJ

American DJ Dyno-Fog II Bedienungsanleitung

JB Systems

JB Systems FX 1700 Bedienungsanleitung