Apera Instruments SX610 Bedienungsanleitung

V2.3

SX610 pH-Meter Instruction Manual

1. Brief Introduction

Thank you for purchasing the Apera Instruments SX610 pH Pen Tester. This tester performs quick & reliable pH measurements

with a single-button. The slim-bodied tester is a cost-effective choice for your regular pH testing including: hydroponics,

aquaculture, water treatment, pools & spas, brewing, etc. The pH probe is replaceable and suitable for test tube measurements.

2. Specifications

1) pH Range: 0 to 14.0 pH

2) Resolution: 0.1 pH

3) Accuracy: ± 0.1 pH, ±1 digit

4) Automatic Temperature Compensation (ATC): 0-60ºC (32-140°F)

5) Automatic calibration: 1-point calibration (pH 7.00)

6) Power: CR2032 Cell Batteries x 2

7) Dimension and Weight: 148*29*14mm/49g

8) Waterproof rating: IP57

3. Instructions

1) Calibration: Rinse the probe in distilled water and dry it with a tissue (never wipe the glass bulb). Dip the probe

in the standard buffer solution pH7.00. Stir gently, hold still, and wait for a stable reading to appear and stay. Then

long-press the CAL button for >two seconds until CAL appears on the screen. When the calibration value 7.0 flashes,

the calibration will finish after a few seconds. The meter will then return to measurement mode with the icon

appearing on the screen.

2) Measurement: Rinse the probe in distilled water and dry it. Dip the probe in the sample solution. Stir gently and

wait for a stable reading to appear and stay.

3) Temperature Unit Selection: Long press CAL button when meter is off.

4) Storage: After measurement, rinse the probe with distilled water and dry it with a tissue. Put the protection cap

back on the electrode. It’s a good practice to pour a small amount of the 3M KCL storage solution (provided in the

purchased kit) into the protection cap when storing the meter. This will help ensure the accuracy of the pH probe.

4. Notes

1) The instrument can typically be used for 1 to 2 weeks before recalibrating.

2) To ensure the reliability of calibration, pH standard buffer solution should be replaced once it becomes

contaminated (after 10-15 uses).

3) Maintenance is necessary for the tip of the probe because it can become contaminated after long-term usage. In

order to maintain the probe, wash the tip with soapwater and a light brush. Then rinse the bulb with distilled water.

4) The typical service life of the pH electrode is about 1-2 years. When the icon “Err” appears on the screen or the

quickness and accuracy are far off, please replace the probe with a new one. The replacement probe’s model

number is SX615. Please go to support.aperainst.com to watch a tutorial video for how to replace the pH probe.

5) The instrument will automatically power off after 10 minutes being unused.

6) Replace the batteries when appears on screen.

V2.3

5. Warranty

We warrant this instrument to be free from defects in material and workmanship and agrees to repair or

replace free of charge, at option of APERA INSTRUMENTS, LLC, any malfunctioned or damaged product

attributable to responsibility of APERA INSTRUMENTS, LLC for a period of two years from the delivery (a

six-month limited warranty applies to probes). This warranty does not apply to defects resulting from

actions such as misuse (violation of the instructions in this manual or operations in the manner not

specified in this manual), improper maintenance, and unauthorized repairs. Warranty period is the time

limit to provide free service for the products purchased by customers, not the service life of the tester or

probe.

APERA INSTRUMENTS, LLC

Address: 6656 Busch Blvd, Columbus, Ohio 43229

Tel: 1-614-285-3080

Email: info@aperainst.com

Website: www.aperainst.com

Inhaltsverzeichnis

Andere Apera Instruments Messgerät Handbücher

Apera Instruments

Apera Instruments WS100 Bedienungsanleitung

Apera Instruments

Apera Instruments PH60Z-MS Bedienungsanleitung

Apera Instruments

Apera Instruments LabSen 551 Bedienungsanleitung

Apera Instruments

Apera Instruments LabSen 241-3SP Bedienungsanleitung

Apera Instruments

Apera Instruments TN400 Bedienungsanleitung

Apera Instruments

Apera Instruments LabSen 753 Bedienungsanleitung

Apera Instruments

Apera Instruments LabSen 801 Bedienungsanleitung

Apera Instruments

Apera Instruments SX716 Bedienungsanleitung

Apera Instruments

Apera Instruments PC 850 Bedienungsanleitung

Apera Instruments

Apera Instruments LabSen 851-H Bedienungsanleitung

Apera Instruments

Apera Instruments 201-C Bedienungsanleitung

Apera Instruments

Apera Instruments TN400 Bedienungsanleitung

Apera Instruments

Apera Instruments Premium Series Bedienungsanleitung

Apera Instruments

Apera Instruments 800 Series Bedienungsanleitung

Apera Instruments

Apera Instruments SX721 Bedienungsanleitung

Apera Instruments

Apera Instruments SX731 Bedienungsanleitung

Apera Instruments

Apera Instruments LabSen 851-1 Bedienungsanleitung

Apera Instruments

Apera Instruments SX811-BS Bedienungsanleitung

Apera Instruments

Apera Instruments YD300 Gebrauchsanweisung

Apera Instruments

Apera Instruments DO8500 Bedienungsanleitung

Apera Instruments

Apera Instruments PH400 Bedienungsanleitung

Apera Instruments

Apera Instruments Gro Star AI104G Bedienungsanleitung

Apera Instruments

Apera Instruments WS200 Bedienungsanleitung

Apera Instruments

Apera Instruments SX811-SS Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung