Argos 642/0110 Bedienungsanleitung

Impressions - Overbed Unit

642/0110

Assembly Instructions - Please keep for future reference

Important - Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, call Customer Helpline 0844 880 6770

Dimensions

Width - 228cms

Depth - 41.5cms

Height - 51.5cms

642/1841

KA5882/02

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Check you have all the

components and tools listed on

pages 2, 3 and 4.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close

to its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor.

• Parts of the assembly will be

easier with 2 people.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Dispose of all packaging

carefully and responsibly.

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Tools required

Cross slot screwdriver

Hammer

Bradawl

Tape measure

5mm

DRILL BIT

The next page can be cut out and used as reference throughout the assembly.

Keep this page with these instructions for future reference.

Components - Panels - Exploded Veiw

Please check you have all the panels listed below

Components - Fittings

Please check you have all the fittings listed below

If you have damaged or missing components,

call the Customer Helpline 0844 880 6770

Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may

be supplied than are required.

Plan view of panels on page 4

Panel pins x 50

Half cranked hinge x 12

Angle bracket x 6

15mm Screw x 30

Metal cam x 36

Metal Dowel x 36

Hinge plate x 12

Connector bolt x 8

25mm Screw x 6

96mm Handle x 6

19mm Bolt x 12

Ruler - Use this ruler to help correctly identify the screws

0 5 10 15 20 25 30 35 40 45 5550 60 65 70 75 80 85 100 10590 95 110 115 120 125 130 135 140 145 150 155 160 165 170

Components - Panels - Plan Veiw

Please check you have all the panels listed below

Side (50 x 40 cm) x 6

Top/base (73 x 39.6cm) x 6

Corniche/Batton (76 x 8 cm) x 6

Shelf (73 x 28 cm) x 3

Door (49.5 x 37 cm) x 6

Back (74.8 x 49.5 cm) x 3

Front edge

Assembly Instructions

Step 1

Fitting metal dowels

Screw metal dowels

into panel

Note: Insert metal dowels as

far as shown.

Repeat for the other five panels

Do not over tighten.

Fitting hinge plates

Screw hinge plates into

panel

Note: Unscrew centre screw

on hinge plate before attaching

to panel (see illustration)

Repeat for the other five panels

Do not over tighten

Do not use power/electric screw drivers to attach the hinge plates.

Please use a normal screw driver to attach it gently as shown here.

DO NOT OVERTIGHTEN THE SCREWS AS IT WILL STRIP OUT THE HOLES.

Step 2

Long leg

forwards

Front

edge

X 6

X 3

Fitting metal cams

Press metal cams firmly

into holes in the top/base

Repeat for the other five

panels.

Press metal cams firmly

into holes in the shelf

Repeat for the other two panels.

Assembly Instructions

Step 3

Step 4

Cam lock in open

position

Cam lock in closed

position

Attaching panels

Position top/base and side

secure by turning cam

locks clockwise

Do not over tighten.

Position shelf onto

side and by turning cam

locks clockwise

Do not over tighten.

Note:

Repeat above to make two

further sections.

X 3

Attaching panels

Position top/base and side

secure by turning cam

locks clockwise

Do not over tighten.

Note:

Repeat the process on the

other two sections.

X 3

Assembly Instructions

Step 5

Important note:

Two people required to

turn unit over

Square up unit

Using a tape measure,

ensure the distance from top

left corner to bottom right

corner is equal to the

distance from top right corner

to bottom left corner

Note:

Repeat the process on the

other two sections.

Attaching panels

Position side to top ,

base and shelf secure

by turning cam locks

clockwise

Do not over tighten.

Note:

Repeat the process on the

other two sections.

X 3

Step 6

A to B = C to D

X 3

Back of unit

Front

edge

Attaching back panels

Position back panel onto

the back of the unit and secure

using panel pins

Note:

Repeat the process on the

other two sections.

X 3

1 2

2 4

Assembly Instructions

Step 7

Step 8

Attaching to the wall

Mark the wall so the top

lines up with the underneath

of the top of the adjoining

robe. (see illustration)

Important note:

It is essential that this

product is fixed to a wall

using the bracket

supplied

Fixing Safety brackets

Postion safety brackets

as shown on the back

edge of the top secure

using screws

Note:

Repeat the process on the

other two sections.

X 3

Mark wall at correct height

Assembly Instructions

Step 9

Step 10

Attaching panels

Secure the reamining cabinets

and robe by the same method

as in step 9 using connecting

bolts

Do not over tighten.

DO FIRST

DO SECOND

Important note:

To join the robes

together, carefully drill

through the holes as

shown. It is best joining

together in position,

before attaching to a

wall.

Connecting to another robe

Drill though the holes in unit

sides using a 5mm drill bit.

(see illustration)

Position units together and

screw together using

connecting bolts

(see illustration)

Connect to the end unit

as in stage 9

Connect to the next 2

cabinets as in step 9

Assembly Instructions

Step 11

Step 12

Attaching panels

Secure battons to the wall

beneath each cabinet using

suitable wall fixing

(Wall fixings not supplied)

Do not over tighten.

For additional support attach

the battens to the wall

beneath the cabinets

(Wall fixings not supplied)

Attaching door hinges

Attach hinges to doors

using 15mm screws

(see illustration)

Repeat for the other five doors

BACK OF

DOOR

X 6

3 3 3

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos FUTON 656/0032 Bedienungsanleitung

Argos

Argos Canterbury 517/0571 Bedienungsanleitung

Argos

Argos 609/1886 Bedienungsanleitung

Argos

Argos Normandy Bedienungsanleitung

Argos

Argos Cheval 147/3100 Bedienungsanleitung

Argos

Argos 906/5716 Bedienungsanleitung

Argos

Argos Medium Pink Velvet Ottoman 419/8688 Bedienungsanleitung

Argos

Argos Lavendon 275473 Bedienungsanleitung

Argos

Argos Montana 395/7370 Bedienungsanleitung

Argos

Argos Osaka 2283935 Bedienungsanleitung

Argos

Argos Lamberto Ottoman TV Bed Bedienungsanleitung

Argos

Argos Camden 305/0679 Bedienungsanleitung

Argos

Argos Toronto 697/0804 Bedienungsanleitung

Argos

Argos Retro Pedestal 343/7395 Bedienungsanleitung

Argos

Argos hygena Hamlin 143/4235 Bedienungsanleitung

Argos

Argos Capella 249/6674 Bedienungsanleitung

Argos

Argos Home 603/4135 Bedienungsanleitung

Argos

Argos New Hallingford 4+4 Drawer Chest Bedienungsanleitung

Argos

Argos Messina Steel Bedienungsanleitung

Argos

Argos Darcy 424/5366 Bedienungsanleitung

Argos

Argos SKYE WOOD Datenblatt

Argos

Argos Double Metal Futon 656/0898 Bedienungsanleitung

Argos

Argos Merrick 214/7071 Bedienungsanleitung

Argos

Argos Hygena 833/4448 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung