Argos New Hallingford 4+4 Drawer Chest Bedienungsanleitung

Assembly Instructions - Please keep for future reference

MADE IN

BRITAIN

If you need help or have damaged or missing parts, call the Customer Helpline: 0870 112 1928

or email: [email protected] (quoting your original order number)

Important - Please read these instructions fully before starting assembly

Dimensions

Width - 119.5cm

New Hallingford - 4+4 Drawer Chest

Issue 6 - 14/08/14

ALR2980

Depth - 40cm

Height - 74.5cm

Issue2 - 01/08/13 - Added text and numbered the drawers at Step 19 to explain the sequence that they should be inserted.

266/5508

268/9577

262/1638

245/7510

258/6625

Issue 3 - 20/11/13 - Changed to Click helpline number

Issue 4 - 12/03/14 - Knock-in Pegs changed to Grey.

16 Wedgefixes added.

4 Plastinails added.

Drawer depth increased.

Issue 5 - 21/04/14 - Add‘New’ to title.

Issue 6 - 14/08/14 - Added Homebase code 272 825.

272 825

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 41.5kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: If there is any

chance of this unit being pulled

over by children etc. it is

recommended that the unit is

secured to a wall using suitable

fixings (not supplied).

• Dispose of all packaging

carefully and responsibly.

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

80%

Components - Panels

Please check you have all the panels listed below

If you have damaged or missing components, call the

Customer Helpline: 0870 112 1928 or email:

[email protected] (quoting your original order number

and the reference numbers below)

1Left Side (D2312A)

(721 x 372mm)

Top (D2322A)

(1193 x 396mm)

2Right Side (D2313A)

(721 x 372mm)

3Upright (D2323A)

(655 x 282mm)

Rail (D2325A)

(1158 x 66mm) x 2

Drawer Back (W518-124)

(518 x 124mm) x 8

Drawer Front (D2324A)

(588 x 162mm) x 8

Drawer Base (T529-367)

(529 x 367mm) x 8

Back (X1184-700)

(1184 x 700mm)

Left Drawer Side (W370-124LH)

(370 x 124mm) x 8

Right Drawer Side (W370-124RH)

(370 x 124mm) x 8

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Tools required

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Ruler - Use this ruler to help correctly identify the screws

Please check you have all the fittings listed below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Components - Fittings

If you have damaged or missing components, call the

Customer Helpline: 0870 112 1928 or email:

[email protected] (quoting your original order number

and the reference numbers below)

Rule Scissors Hammer

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Electric drill

(do not use for

fitting screws)

B C

D E F

G H

Small locking

nut (F3) x 16

Nail (F51) x 26

13mm Screw (F52) x 48 13mm Screw (F63) x 48

Wooden dowel (F22) x 7

19mm Screw (F461) x 16

Metal dowel (F901) x 24

Large locking

nut (F900) x 8 Knock-in Peg (F171GY) x 32

KR Runner (F160) x 8

L Runner (F161) x 8

L Runner (F159) x 8

R Runner (F162) x 8

350mm long

Handle (F278) x 8

Plastic Nail (F91) x 5

Wedgefix (F639) x 32

Step 1

80%

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 0870 112 1928 or email:

[email protected] (quoting your original order number

and the reference numbers below)

x 8

Step 2

Prepare the drawer

fronts

Screw 2 metal dowels

into the holes shown on

the back of each drawer

front .

Note: Tighten the metal

dowels up fully against

the panels.

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and right drawer

side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 3

Attach the drawer

sides to the drawer

front

Push the left drawer side

. and right drawer side

. onto the back of the

drawer front .

Turn the small locking

nuts on the left

drawer side and right

drawer side .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

Groove

Note: The locking nuts can be on either surface of the drawer sides.

Make sure that the groove is on the inside, as shown.

x 8

Note: Due to the manufacturing process, the holes for the

locking nut can be on either surface of the drawer sides.

x 8 x 8

Assembly Instructions

Step 4

Fit the drawer base

Slide the drawer base

down the grooves in the

drawer sides and

and down into the

groove in the drawer

front .

Step 5

Fit the drawer back

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

Step 6

8 9

Attach the handles

Attach a handle to

each drawer front

using 2 screws .

x 8

Step 7

Fit the wedgefixes

Turn the drawer

assemblies over and

slide 4 wedgefixes

into the front and back

grooves, as shown, and

tighten up the screws.

Assembly Instructions

Step 8

Fit runners to the

drawers

Fit runner , marked

with ‘R’, to the bottom

edge of the right drawer

side , as shown,

making sure that it is

pushed up against the

back of the drawer front

. .

Use a bradawl to mark

the fixing positions, then

secure with 2 screws .

Fit runner , marked

‘L’, to the bottom edge

of the left drawer side

using the same method.

K d

K c

Runners must be

pushed up against

the drawer front

K d

K c

x 8

10mm

Prepare the 2 rails

Tap 2 wooden dowels

into each rail .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

Insert 2 large locking

nuts into each rail .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 9

plain chipboard surface

x 2

Assembly Instructions

Step 10

Finished

front edge

Finished

front edge

Prepare the left side

a: Fit 4 runners to

the left side .

The 1st screw uses

the 2nd hole in from the

front of the runner.

The 2nd and 3rd screws

. use the holes that line

up with the other panel

holes.

b: Fit a screw into

the 2nd hole in at the top

of the runners .

Screw 2 metal dowels

into the left side .

Insert a large locking

nut into the left side

. .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Tap a wooden dowel

into the left side .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

K a

Finished front edge

1st

screw

2nd

screw

3rd

screw

K a

Finished front edge

K a

10mm

Assembly Instructions

Step 11

Prepare the right side

a: Fit 4 runners to

the right side .

The 1st screw uses

the 2nd hole in from the

front of the runner.

The 2nd and 3rd screws

. use the holes that line

up with the other panel

holes.

b: Fit a screw into

the 2nd hole in at the top

of the runner .

Screw 2 metal dowels

into the right side .

Insert a large locking

nut into the right side

. .

Tap a wooden dowel

into the right side .

K b

Finished front edge

H1st

screw

2nd

screw

H3rd

screw

K b

Finished front edge

K b

Finished

front edge

Finished

front edge

Assembly Instructions

Step 12

Join the right side and

rails

2 people are needed

here

Push the 2 rails onto

the right side .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the rails .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

Note: Support this

rail until the left

side has been fitted

in the next step.

plain chipboard surface

Fit the left side

Push the left side

onto the 2 rails .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the rails .

Step 13

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos NOMAD 727/7290 Bedienungsanleitung

Argos

Argos Mix Bedienungsanleitung

Argos

Argos Malvern 395/6632 Bedienungsanleitung

Argos

Argos Kids Sywell Bedienungsanleitung

Argos

Argos Camden 305/0710 Bedienungsanleitung

Argos

Argos 6172884 Bedienungsanleitung

Argos

Argos 457/2156 Handbuch

Argos

Argos Under Basin Unit 833/2763 Bedienungsanleitung

Argos

Argos Nordic 4x2 Drawer Chest Bedienungsanleitung

Argos

Argos Wow Raye Wooden Chair Bedienungsanleitung

Argos

Argos 617/9447 Bedienungsanleitung

Argos

Argos Perth 392/9652 Bedienungsanleitung

Argos

Argos Belle HOME 879/0240 Bedienungsanleitung

Argos

Argos Hallingford 802/6622 Bedienungsanleitung

Argos

Argos White Tongue & Groove 2 Drawer Unit Bedienungsanleitung

Argos

Argos Camden 305/0772 Bedienungsanleitung

Argos

Argos 408/5935 Bedienungsanleitung

Argos

Argos Normandy Tall 3+3 Mirror Robe Bedienungsanleitung

Argos

Argos Mia Hearts 2587136 Bedienungsanleitung

Argos

Argos Antique 7587430 Bedienungsanleitung

Argos

Argos Puerto Rico Bedienungsanleitung

Argos

Argos Anderson Coffee Table 290/8021 Bedienungsanleitung

Argos

Argos Camden 244/3012 Bedienungsanleitung

Argos

Argos Osaka Dressing Table 2273237 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung