Argos Alicia Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 53.5cm

Depth - 39.5cm

Height - 65.5cm

Alicia - 3 Drawer Chest

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 2 - 06/02/14

Important - Please read these instructions fully before starting assembly

ALR2945

152/3799

151/3084

Issue 2 - 06/02/14 Added 4 wedgefixes to the kit.

Code for wrap back changed to W468-115BCK.

Note added at Step 5 to remove protective film.

Note added at Step 16 to remove protective film.

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 16kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: If there is any

chance of this unit being pulled

over by children etc. it is

recommended that the unit is

secured to a wall using suitable

fixings (not supplied).

• Dispose of all packaging

carefully and responsibly.

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

Note: If required the next page

can be cut out and used as

reference throughout the

assembly. Keep this page with

these instructions for future

reference.

Components - Panels

Please check you have all the panels listed below

12 3

80%

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Left Side (D2662A)

(637 x 393mm)

Right Side (D2663A)

(637 x 393mm)

Top (D2683A)

(533 x 395mm)

Rail (D2684A)

(499 x 58mm) x 2

Drawer Front (D2666A)

(495 x 189mm) x 3

Drawer Base (T479-327)

(479 x 327mm) x 3

Back (X605-525)

(605 x 525mm)

Left Drawer Side (W330-115LH)

(330 x 115mm) x 3

Right Drawer Side (W330-115RH)

(330 x 115mm) x 3

Drawer Back (W468-115BCK)

(468 x 115mm) x 3

Please check you have all the fittings listed below

Tools required

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Wooden dowel (F22) x 4

Metal dowel (F901) x 14

D E

Large locking

nut (F900) x 8

Rule Scissors Hammer

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Small locking

nut (F3) x 6

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

J K

see malibu fitment mk2 for large number of panels and fittings

Knock-in Peg (F171) x 12

25mm Screw (F50) x 6

Handle (F319) x 3

Nail (F51) x 16

9mm Screw (F74) x 6 9mm Screw (F73) x 12

Drawer runner (F1004) x 6

Wedgefix (F639) x 12

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

Step 2

Prepare the 3 drawer

fronts

Screw 2 metal dowels

into the holes shown on

the back of the drawer

front .

Note: Tighten the metal

dowels up fully against

the panels.

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and right drawer

side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 3

Attach the drawer

sides to the drawer

front

Push the left drawer side

. and right drawer side

. onto the back of the

drawer front .

Turn the small locking

nuts on the left

drawer side and right

drawer side .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

Groove

Note: Due to the manufacturing process, the holes for the

locking nut can be on either surface of the drawer sides.

Note: The locking nuts can be on either surface of the drawer sides.

Make sure that the groove is on the inside, as shown.

x 3

x 3 x 3

x 3

Assembly Instructions

Step 4

Fit the drawer base

Slide the drawer base

down the grooves in the

drawer sides and

and down into the

groove in the drawer

front .

Step 5

Fit the drawer back

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

Step 6

7 8

Attach the handle

Attach a handle to the

drawer front using 2

screws .

x 3

Note: Remove the protective

film from the drawer fronts

before starting Step 6.

Assembly Instructions

Step 7

Step 8

Fit the wedgefixes

Turn the drawer

assemblies over.

Slide a wedgefix into

the small groove in the

drawer front , drawer

back and drawer

sides and , as

shown.

Once in place, tighten up

the screws.

Finished

front edge

Finished

front edge

Finished

front edge

Prepare the left side

a: Place 3 runners on

the left side as

shown. Slide back the

top of runner and use the

2nd hole from the front

to fit the 1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the left side .

Screw 2 metal dowels

into the left side .

Insert 2 large locking

nuts into the left side

. .

Note: The arrow on the

locking nuts must point

towards the hole in the

edge of the panel.

7 8

x 3

Finished

front edge

Assembly Instructions

Step 9

Prepare the right side

a: Place 3 runners on

the right side as

shown. Slide back the

top of runner and use the

2nd hole from the front

to fit the 1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the right side .

Screw 2 metal dowels

into the right side .

Insert 2 large locking

nuts into the right

side .

Finished

front edge

Finished

front edge

Finished

front edge

Assembly Instructions

Step 10

Step 11

10mm

Prepare the 2 rails

Tap 2 wooden dowels

into each of the rails .

Note: Wooden dowels

must not stick out from

the edge by more than

10mm or they may

damage other panels.

Insert 2 large locking

nuts into each of the

rails .

Ax 2

plain chipboard surface

Fit the 2 rails to the

right side

Push the rails onto

the right side .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the rails .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

Note: Support the

rails until the left

side has been fitted

in the next step.

plain chipboard surface

Assembly Instructions

Step 12

Step 13

Prepare the top

Screw 4 metal dowels

into the top .

Finished

front edge

Fit the left side

Push the left side

onto the assembly.

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the rails .

Finished

front edge

plain chipboard surface

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos SCHREIBER 6324852 Bedienungsanleitung

Argos

Argos Darcy 428/5890 Bedienungsanleitung

Argos

Argos Camden 305/0772 Bedienungsanleitung

Argos

Argos Linear 247/8173 Bedienungsanleitung

Argos

Argos White Tongue & Groove 2 Drawer Unit Bedienungsanleitung

Argos

Argos Home Tall Unit Shelf and Drawer 699/9524 Bedienungsanleitung

Argos

Argos Single Robe 234046 Bedienungsanleitung

Argos

Argos Charlie 332/7553 Bedienungsanleitung

Argos

Argos Campbell Oak Effect Dining Table 280/7823 Bedienungsanleitung

Argos

Argos Malibu Bedienungsanleitung

Argos

Argos 458/2373 Bedienungsanleitung

Argos

Argos Canterbury 4 DR 6 DRW ROBE Bedienungsanleitung

Argos

Argos Holsted 1800 Bedienungsanleitung

Argos

Argos 755/2238 Bedienungsanleitung

Argos

Argos Westminster 424/3485 Bedienungsanleitung

Argos

Argos Chicago Dining Set Bench Bedienungsanleitung

Argos

Argos Austen HOME 804/3416 Bedienungsanleitung

Argos

Argos Toronto 697/0804 Bedienungsanleitung

Argos

Argos 033 3562 Series Bedienungsanleitung

Argos

Argos Malibu Bedienungsanleitung

Argos

Argos Antonio 157-7563 Bedienungsanleitung

Argos

Argos Franklin Recliner 2493567 Bedienungsanleitung

Argos

Argos Scandinavia Bedienungsanleitung

Argos

Argos Home Venice 806/9627 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung