Argos Home Venice 806/9627 Bedienungsanleitung

MADE IN

BRITAIN

If you need help or have damaged or missing parts, please visit www.argos-support.co.uk

or email: Help@ClickSpares.co.uk (quoting your original order number)

Alternatively, call the Spares Helpline on: 0330 016 1114

For any other queries please contact the Customer Helpline on: 0345 640 2020

Important - Please read these instructions fully before starting assembly

Assembly Instructions - Important:Retain these instructions

for future reference

More help is available throughout this

booklet by scanning in the QR codes

or typing in the links

WARNING!

In order to prevent overturning, this product must be

used with the wall attachment device provided

Dimensions

Width - 152.3cm

Depth - 39.1cm

Height - 47.1cm

Venice - 1500 Wide TV Unit

Issue 6 - 20/11/19

806/9627

804/8411

803/8304

Components - Panels

Please check you have all the panels listed below

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• Regularly check all fastenings

to ensure that they are properly

tightened.

• Warning: This unit weighs

approximately 36kgs.

Please lift with care.

• Assembly to be carried out by

a competent adult only.

• Check you have all the

components and tools listed on

pages 1, 2, 4 and 4.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• During assembly children

should be kept away from the

product due to possible risk of

injury.

• Installation shall only be

carried out exactly according to

the manufacturer’s instructions

- otherwise a safety risk can

occur if incorrectly installed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• WARNING: To prevent

possible overbalancing this unit

must be secured to a wall

using the overbalance

protector kit supplied.

• Dispose of all packaging

carefully and responsibly.

• Do not use this item if any

components are missing or

damaged.

Left Drawer Front (DF-00012886)

(71.9 x 21.6cm)

1Right Drawer Front (DF-00012887)

(71.9 x 21.6cm)

Drawer Base (TDF-00020643)

(67.6 x 34.7cm) x 2

Left Drawer Side (WRP-000000412LH)

(35 x 16.5cm) x 2

3Right Drawer Side (WRP-000000413RH)

(35 x 16.5cm) x 2

Drawer Back (WRP-000000414BCK)

(66.6 x 16.5cm) x 2

Components - Panels

Please check you have all the panels listed below

7 8Left Side (DF-00012879)

(43.6 x 38.9cm)

Right Side (DF-00012880)

(43.6 x 38.9cm)

Small Divider (DF-00017805)

(10.6 x 19.3cm)

Top (DF-00012878)

(152.3 x 39.1cm)

Fixed Shelf (DF-00012883)

(144.7 x 36.9cm)

Divider (DF-00012884)

(20.4 x 36.7cm)

Bottom Rail (DF-00012881)

(144.7 x 12.8cm)

Back Rail (DF-00012993)

(144.7 x 9.6cm)

Plinth Rail (DF-00012882)

(144.7 x 9.6cm) x 2

Back (X624-346)

(62.4 x 34.6cm) x 2

Please check you have all the fittings listed below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Components - Fittings

Bag 2

Bag 1

A C

Knock-in Peg (F171GY) x 8

D E

19mm Screw (F461) x 4

13mm Screw (F63) x 8

Small locking cam

nut (F3) x 4

Metal dowel (F901) x 4

A E

13mm Screw (F63) x 4

Metal dowel (F901) x 14

Large locking cam

nut (F900) x 14

Wooden dowel (F22) x 14

Hollow core

locking nut

(F892) x 4

Small metal dowel (F893) x 8

40mm Screw (F910) x 2

9mm Screw (F73) x 12

15mm Screw (F284) x 4

Nail (F51) x 24

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Wedge fix (F532) x 4

Please check you have all the fittings listed below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Components - Fittings

350mm long

CR Runner (F424) x 2

CL Runner (F422) x 2

Individual Fittings Bags

DL Runner (F425) x 2

DR Runner (F426) x 2

Overbalance protector

kit (F474) x 1

Handle (FBARH128) x 2

336mm long

Drawer Brace (F420) x 2

Tools required

Rule

Scissors

Hammer

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Electric drill

(do not use for

fitting screws)

Bradawl

Flat-head

screwdriver

Spirit level

1 2

Assembly Instructions

Step 1

x 2

Prepare the left and

right drawer front

Screw 2 metal dowels

into each of the 2 drawer

fronts and .

Note: Tighten the metal

dowels up fully against

the panels.

1 2

hps://www.youtube.com/watch?v=HclfJdkm-Lg

Standard Drawer Box Assembly

Step 2

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and the right

drawer side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 3

Attach the drawer

sides to the drawer

fronts

Push the left drawer

sides . and right

drawer sides onto

the back of the drawer

fronts and .

Turn the small locking

nuts on the left

drawer sides and

right drawer sides .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

1 2

Step 1Use the Bag 2 for Steps 1 - 8

Note: Shallow

identification hole

1 2

Assembly Instructions

Step 4

Fit the drawer base

Slide the drawer base

down the grooves in the

drawer sides and

and down into the

groove in the drawer

front and .

Step 5

1 2

Fit the drawer back

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

3 4

Step 6

Attach the handles

Attach a handle to

each drawer front

and using screws .

x 2

1 2

Assembly Instructions

Step 7

Step 8

x 2

Fit runners to the

drawers

Fit the DL runner to

the bottom edge of the

left drawer side , as

shown, making sure that

it is pushed up against

the back of the drawer

front and . Use a

bradawl to mark the

fixing positions, then

secure with 2 screws .

Fit the DR runner to

the bottom edge of the

right drawer side

using the same method.

P c

P d

P c

Runners must be

pushed up against

the drawer front

P d

hps://www.youtube.com/watch?v=Z6lGMy19h7Q

Fixing Bottom Mounted Runners

Bradawl

Fit the drawer braces

Turn the 2 drawer

assemblies over and

hook a drawer brace

onto the bottom edge of

the drawer back .

Fix it to the drawer front .

. and and drawer

back using 2 screws

. .

1 2

Assembly Instructions

Step 9

Prepare the right side

a: Fit a CR runner

to the right side .

The 1st screw uses

the 1st hole in from the

front of the runner.

The 2nd and 3rd screws

. use the holes that line

up with the other panel

holes.

b: Mark the top hole of

the runner with a

bradawl and then fit a

screw .

c: Screw 6 metal

dowels into the right

side .

d: Push 2 hollow core

locking nuts into the

right side , making

sure that they are flush

against the panel’s

surface.

Using a hammer, tap in

the pin on the hollow

core locking nut .

Note: The pin should be

tapped in flush with the

top surface of the hollow

core locking nut .

P b

1st

screw

Front edge

P b

Bradawl

P b

AA AA

Finished

front edge

Finished

front edge

Finished

front edge

Finished

front edge

hps://www.youtube.com/watch?v=Z6lGMy19h7Q

Fixing Bottom Mounted Runners

Use the Bag 1 for Steps 9 - end

Finished

front edge

Finished

front edge

Assembly Instructions

Step 10

Step 11

Prepare the top

Screw 6 small metal

dowels into the holes

in the top .

Fit the bracket from the

overbalance protector kit

. to the shallow

mark-hole drilled into the

top using 1 of its

screws.

Note: Only fit 1 of the

screws, the other 1 will

be fitted later.

Finished

front edge

Fit the right side to

the top

Slide the right side

onto the top .

The 2 hollow core locking

nuts fitted to the right

side must slide over

the 2 small metal dowels

. fitted to the top .

Insert a screwdriver into

the 2 hollow core locking

nuts and turn the nuts

inside as far as they will

go.

K K

Dieses Handbuch passt für folgende Modelle

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Puerto Rico Bedienungsanleitung

Argos

Argos Antique 7587430 Bedienungsanleitung

Argos

Argos Anderson 2 plus 2 Sideboard Bedienungsanleitung

Argos

Argos Stirling Bedienungsanleitung

Argos

Argos Lima Bedienungsanleitung

Argos

Argos 603/4135 Bedienungsanleitung

Argos

Argos 257/2471 Bedienungsanleitung

Argos

Argos Nordic 4x2 Drawer Chest Bedienungsanleitung

Argos

Argos 626/9728 Bedienungsanleitung

Argos

Argos hygena 147976413 Bedienungsanleitung

Argos

Argos 875/2886 Bedienungsanleitung

Argos

Argos 044 0502 Series Bedienungsanleitung

Argos

Argos Java 156/5465 Bedienungsanleitung

Argos

Argos Rattan 752/6965 Bedienungsanleitung

Argos

Argos Hallingford 802/6622 Bedienungsanleitung

Argos

Argos 338/8619 D Bedienungsanleitung

Argos

Argos 1516610 Bedienungsanleitung

Argos

Argos 355/3932 D Bedienungsanleitung

Argos

Argos Haversham Bedienungsanleitung

Argos

Argos Merrick 214/7071 Bedienungsanleitung

Argos

Argos 609/7024 Bedienungsanleitung

Argos

Argos Amalfi 1455056 Bedienungsanleitung

Argos

Argos TC NEW PAOLO 3 SEAT POWERED Bedienungsanleitung

Argos

Argos 392/4839 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung