Argos Arvika 335/9789 Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Width - 123cm

Arvika - 3 Door Mirror Robe

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 2 - 16/12/14

Important - Please read these instructions fully before starting assembly

ALR3116

335/9789

346/6531

Depth - 49.5cm

Height - 186.5cm

Issue 2 - 16/12/14

Add tools required to components page.

Revert to 40mm screws for feet.

Components - Panels

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 83.5kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 1, 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

overbalance kit supplied.

• Dispose of all packaging

carefully and responsibly.

12 3

Left Side (DF917)

(1791 x 494mm)

Right Side (DF1893)

(1791 x 494mm)

Divider (DF1892)

(1791 x 464mm)

Please check you have all the panels listed on pages 1 and 2

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Components - Panels

80%

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Horizontal (DF1420)

(797 x 464mm)

Shelf (DF1894)

(382 x 463mm) x 3

Top (DF1891)

(1226 x 495mm)

Base (DF1965)

(1226 x 495mm)

4 5 Hanging Rail (FHR791)

(791mm long)

9 10 Right Door (DF3010)

(1785 x 394mm)

Left Door (DF920)

(1785 x 394mm)

Mirror Door (DF3011)

(1785 x 394mm)

Mirror - SG27

1755 x 388mm

Safety Back SAR

Small Back (X1817-401)

(1817 x 401mm)

Large Back (X1817-816)

(1817 x 816mm)

12 13

Please check you have all the panels listed on pages 1 and 2

Please check you have all the fittings listed below

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Ruler - Use this ruler to help correctly identify the screws

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

A B

H I

Nail (F51) x 40

40mm Screw (F910) x 17

J K

Large locking

nut (F900) x 4

Metal dowel (F901) x 4 Wooden dowel (F22) x 16

19mm Screw (F461) x 4

13mm Screw (F63) x 22

Handle (F336) x 2 Leg (F334) x 5

Rail Holder

(F891) x 2

Hinge plate

(F523) x 9

Hinge (F522) x 9

Strap

Screw Washer x 2

Overbalance protector kit (F269) x 1

Shelf stud (F110) x 12

Nail screw (F277) x 6 Back holder (F276) x 6

*These can also be round

Tools required

Rule

Scissors

Spirit

level

Hammer Bradawl

Eye protection

(when using a

hammer or drill)

Cross-head

screwdriver

Step

ladder

Electric drill

(only use

when drilling

into walls)

Square

mm 10 20 30 40 50 60 70 80 90 100

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

Finished

front edge

Prepare the divider

Screw 2 metal dowels

into the divider .

Tap 4 wooden dowels

into the divider .

To fit the rail holder ,

screw through the top

hole with screw and

into the mark hole drilled

in the divider . Make

sure that it is fitted

straight, in line with the

panel edges and then fit

another screw using

the lower hole.

Fit 3 hinge plates onto

the divider , making

sure that the slot is

facing towards the

finished front edge.

10mm

Prepare the horizontal

Insert 4 large locking

nuts into the

horizontal .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Tap 4 wooden dowels

into the horizontal .

Step 2

Finished

front edge

Finished

front edge

Finished

front edge

Assembly Instructions

Step 3

Step 4

Finished

front edge

Fit the horizontal to

the divider

Push the horizontal

onto the divider .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the horizontal .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

Prepare the left side

Screw 2 metal dowels

into the left side .

Tap 4 wooden dowels

into the left side .

To fit the rail holder ,

screw through the top

hole with screw and

into the mark hole drilled

in the left side . Make

sure that it is fitted

straight, in line with the

panel edges and then fit

another screw using

the lower hole.

Fit 3 hinge plates onto

the left side , making

sure that the slot is

facing towards the

finished front edge.

Finished

front edge

Assembly Instructions

Step 5

Fit the left side

Push the left side

onto the horizontal .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the horizontal .

1Finished

front edge

Fit the top

Attach the top to the

left side and divider

using 4 screws .

Note: The top panel has been finished on both surfaces.

The base panel only has 1 finished suface.

Step 6

Assembly Instructions

Step 7

Finished

front edge

Prepare the right side

Tap 4 wooden dowels

into the right side .

Fit 3 hinge plates onto

the right side , making

sure that the slot is

facing towards the

finished front edge.

Fit the right side

Attach the right side

to the top using 2

screws .

Step 8

Assembly Instructions

Step 9

Step 10

Fit the feet

Attach the 5 feet to

the base using 5

screws .

Finished

front edge

Fit the base

Attach the base to

the left side , right

side and upright

using 6 screws .

2 3

Finished

front edge

plain

chipboard

surface

Assembly Instructions

Step 11

Fit the back panels

a: Square up the unit by

making sure that

measurement x:x equals

y:y.

Place the small back

and large back down,

onto the unit as shown.

Make sure that the 2

backs are pushed up

tight against each other

and that they meet in the

centre of the divider’s

back edge.

b: Nail around the

outside edges of the 2

backs.

Note: Do not nail where

the 2 backs meet and

nails should be spaced

about 150mm apart.

c: Push the 6 nail

screws through the 6

back holders and tap

them down between the

small back and large

back and into the

back edge of the divider

. .

Keep tapping the nail

screws in until the

back holders dig into

the small and large back.

Carefully stand the

unit up for the next

step.

The measurement from top corner X to bottom corner X must be

equal to the measurement from top corner Y to bottom corner Y

Note: If ever you need to take

the backs off to dismantle the

unit, the nail screws can be

taken out using a screwdriver.

c: E

FE +

Note: These can

also be round

Warning: The

unit is heavy.

Lift with care.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Argos Inneneinrichtung Handbücher

Argos

Argos Alicia 188/8379 Bedienungsanleitung

Argos

Argos Sicily 2926106 Bedienungsanleitung

Argos

Argos Wow Pine Kitchen Trolley 424/6963 Bedienungsanleitung

Argos

Argos Tolga 323/5164 Bedienungsanleitung

Argos

Argos 609/2555 Bedienungsanleitung

Argos

Argos Vancouver II 643/8133 Bedienungsanleitung

Argos

Argos Aspley 391/8168 Bedienungsanleitung

Argos

Argos 875/9047 Bedienungsanleitung

Argos

Argos 875/2886 Bedienungsanleitung

Argos

Argos Ellie 244/7472 Bedienungsanleitung

Argos

Argos Mia Hearts 2587136 Bedienungsanleitung

Argos

Argos 600/1986 Bedienungsanleitung

Argos

Argos 257/2471 Bedienungsanleitung

Argos

Argos 600/0774 Bedienungsanleitung

Argos

Argos Vince 697/1470 Bedienungsanleitung

Argos

Argos Adult Malibu Bedienungsanleitung

Argos

Argos Amersham 881/4968 Bedienungsanleitung

Argos

Argos Carly Desk 617-2592 Bedienungsanleitung

Argos

Argos Normandy Tall 3+3 Mirror Robe Bedienungsanleitung

Argos

Argos 044 0502 Series Bedienungsanleitung

Argos

Argos Modular Bedienungsanleitung

Argos

Argos Winchester 408/5571 Bedienungsanleitung

Argos

Argos Cheval 147/5634 Bedienungsanleitung

Argos

Argos Single Robe 234046 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung