Argos Normandy Tall 3+3 Mirror Robe Bedienungsanleitung

MADE IN

BRITAIN

Dimensions

Normandy - Tall 3+3 Mirror Robe

Assembly Instructions - Please keep for future reference

If you need help or have damaged or missing parts, call the Customer Helpline: 08456 400800

Issue 1 - 30/09/14

Important - Please read these instructions fully before starting assembly

ALR3085

355/6324

357/5563

338/3267

Width - 149.5cm

Depth - 50cm

Height - 199.5cm

Safety and Care Advice

Important - Please read these instructions fully before starting assembly

• Warning: This unit weighs

approximately 108kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• We do not

recommend the

use of power

drill/drivers for

inserting screws,

as this could damage the unit.

Only use hand screwdrivers.

• Safety note: It is

recommended that this unit is

secured to a wall using the

bracket supplied.

• Dispose of all packaging

carefully and responsibly.

Drawer Front (DF1859)

(494 x 162mm) x 3

Drawer Back (W436-124)

(436 x 124mm) x 3

Left Drawer

Side (W350-124LH)

(350 x 124mm) x 3

Right Drawer

Side (W350-124RH)

(350 x 124mm) x 3

Drawer Base

(T447-367)

(447 x 367mm) x 3

Components - Panels

Please check you have all the panels listed below

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

1 2 3 4

Base (DF1969A)

(1461 x 470mm)

Top (D2047A)

(1495 x 496mm)

Components - Panels

Please check you have all the panels listed below

80% x 1

90% x 1

80% x 2

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Divider (DF1870)

(1883 x 469mm)

Horizontal (DF1871)

(468 x 468mm)

Small Divider (DF1872)

(489 x 469mm)

Mirror Door (DF1858A)

(1399 x 494mm)

(Mirror - SG14

1376 x 311mm

Safety Back SAR)

89 10

Large Shelf (D2052A)

(965 x 467mm)

12 Back Rail (D2053A)

(965 x 120mm)

Plinth (D2054A)

(1461 x 80mm) x 2

Small Shelf (D2060A)

(479 x 467mm)

Plain Door (D2056A)

(1894 x 494mm) x 2

Large Hanging Rail (FHR957)

(957mm long) x 2

Small Hanging Rail (FHR471)

(471mm long) x 2

20 Large Back (X956)

(1914 x 988mm)

Small Back (X955)

(1914 x 499mm)

Left Side (D2048C)

(1978 x 471mm)

Right Side (D2049C)

(1978 x 471mm)

1615

Please check you have all the fittings listed below

Components - Fittings If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Note: The quantities below are the correct amount to complete the assembly. In some cases

more fittings may be supplied than are required.

Wooden dowel (F22) x 14

Metal dowel (F901) x 26

Nail screw (F277) x 6

Large locking

nut (F900) x 20

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170

Ruler - Use this ruler to help correctly identify the screws

Nail (F51) x 45

Shelf stud (F110) x 8

13mm Screw (F63) x 30

Rail holder

(F1014) x 8

40mm Screw (F910) x 4

Plastic Nail (F91) x 6

Back holder (F276) x 6

*These can also be round

Small locking

nut (F3) x 6

Wedgefix (F639) x 6

9mm Screw (F73) x 12 9mm Screw (F74) x 6

Drawer runner (F1004) x 6

Knock-in Peg (F171GY) x 12

Handle (FBARHANDLE ) x 6

Handle screw (F461) x 12

Hinge plate (F523) x 11

Hinge (F518) x 11

Strap Screw Washer x 2

Overbalance protector kit (F269) x 1

Assembly Instructions

If you have damaged or missing components, call the

Customer Helpline: 08456 400800 quoting the reference

numbers below

Step 1

80% x 2

x 3

Step 2

Prepare the 3 drawer

fronts

Screw 2 metal dowels

into each of the drawer

fronts .

Note: Tighten the metal

dowels up fully against

the panels.

Prepare the drawer

sides

Insert a small locking

nut into the hole

shown on the left drawer

side and the right

drawer side .

Note: The arrow on the

locking nut must point

towards the hole in the

edge of the panel.

Step 3

Attach the drawer

sides to the drawer

fronts

Push the left drawer sides

. and right drawer sides

. onto the back of the

drawer fronts .

Turn the small locking

nuts on the left

drawer side and right

drawer side .

Note: Turn the locking

nuts clockwise to

secure panels - more

than 1/2 a turn.

Assembly Instructions

Step 4

Fit the drawer base

Slide the drawer base

down the grooves in the

drawer sides and

and down into the

groove in the drawer

front .

Step 5

Fit the drawer back

between the drawer

sides and .

Make sure that the

drawer base fits into

the groove in the drawer

back .

Hold the drawer back

in position and tap the

knock-in pegs

through the holes in the

drawer sides and .

Step 6

2 3

Step 7

Fit the wedgefixes

Turn the drawer

assemblies over and

slide 2 wedgefixes

into the front and back

grooves, as shown, and

tighten up the screws.

x 3

S b

Attach the handles

Attach a handle to

each drawer front

using 2 screws .

S a

S b

S a

Assembly Instructions

Step 8

10mm

Finished

front edge

Prepare the divider

a: Place a runner on

the divider . Slide

back the top of runner

and use the 2nd hole

from the front to fit the

1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the divider .

Fit 3 hinge plates onto

the divider , making

sure that the slot is

facing towards the

finished front edge.

c: Tap 2 wooden

dowels into the

divider .

Screw 3 metal dowels

into the divider .

Insert 2 large locking

nuts into the divider

. .

Finished

front edge

Finished

front edge

Finished

front edge

80% x 3

90% x 1

Finished

top edge

Finished

top edge

Finished

front edge

Finished

front edge

Assembly Instructions

Step 9

Step 11

Step 10

Finished

front edge

Prepare the horizontal

Insert 4 large locking

nuts into the

horizontal .

Tap 2 wooden dowels

into the horizontal .

Fit the horizontal to

the divider

Push the horizontal

onto the divider .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the horizontal .

Note: Turn the large

locking nuts as far as

they will go - more than

1/2 a turn.

Finished

front edge

Prepare the small

divider

a: Place a runner on

the small divider .

Slide back the top of

runner and use the 2nd

hole from the front to fit

the 1st screw .

b: Slide the runner

back the other way and

fit the 2nd screw into

the corresponding hole

in the small divider .

Screw 2 metal dowels

into the small divider .

Finished

front edge

Assembly Instructions

Step 12

Fit the small divider to

the horizontal

Push the small divider

onto the horizontal .

Use a screwdriver to

tighten the 2 large

locking nuts fitted to

the horizontal .

Prepare the base

Insert 4 large locking

nuts into the base .

Tap 2 wooden dowels

into the base .

Step 13

Step 14

plain chipboard surface

Finished

front edge

Fit the base

Push the base onto

the divider and small

divider and secure

with 4 screws .

plain chipboard surface

Finished

front edge

Assembly Instructions

Step 15

Step 16

Prepare the left side

Screw 5 metal dowels

into the left side .

Fit 4 hinge plates onto

the left side , making

sure that the slot is

facing towards the

finished front edge.

Insert 2 large locking

nuts into the left side

. .

Tap a wooden dowel

into the left side .

Prepare the right side

Screw 4 metal dowels

into the right side .

Fit 4 hinge plates onto

the right side , making

sure that the slot is

facing towards the

finished front edge.

Insert 2 large locking

nuts into the right

side .

Tap a wooden dowel

into the right side .

Finished

front edge

Dieses Handbuch passt für folgende Modelle

Andere Argos Inneneinrichtung Handbücher

Argos

Argos 609/0045 Bedienungsanleitung

Argos

Argos Home 603/4135 Bedienungsanleitung

Argos

Argos Home New Pagnell 601/9435 Bedienungsanleitung

Argos

Argos Amersham 724/4199 Bedienungsanleitung

Argos

Argos Alicia 171/5875 Bedienungsanleitung

Argos

Argos 626/9728 Bedienungsanleitung

Argos

Argos SWIVEL Bedienungsanleitung

Argos

Argos Haversham Bedienungsanleitung

Argos

Argos Corners 9583119 Bedienungsanleitung

Argos

Argos Baby Amelie 228/2785 Bedienungsanleitung

Argos

Argos Matrix 609/0399 Bedienungsanleitung

Argos

Argos 1589317 Bedienungsanleitung

Argos

Argos 755/2238 Bedienungsanleitung

Argos

Argos Portabase Bedienungsanleitung

Argos

Argos RIO 4 Seater Sofa Set 608/9805 Bedienungsanleitung

Argos

Argos 875/0383 Bedienungsanleitung

Argos

Argos Stratford White Bedienungsanleitung

Argos

Argos Puerto Rico Bedienungsanleitung

Argos

Argos New Hallingford 4+4 Drawer Chest Bedienungsanleitung

Argos

Argos Malvern 390/9641 Bedienungsanleitung

Argos

Argos Tolga 323/6132 Bedienungsanleitung

Argos

Argos Emberton 934/2501 Bedienungsanleitung

Argos

Argos AH TOBY 8545550 Bedienungsanleitung

Argos

Argos Camden 244/3012 Bedienungsanleitung

Beliebte Inneneinrichtung Handbücher anderer Marken

Homelegance

Homelegance California 1662PEK-1CK Bedienungsanleitung

Osmond Ergonomics

Osmond Ergonomics FLO Bedienungsanleitung

OVE

OVE ELOISE 42 Bedienungsanleitung

overstock

overstock MF286255 Bedienungsanleitung

Sonoma

Sonoma 160-801 Bedienungsanleitung

BOLERO

BOLERO Wicker Side Chair CF158 Installationsanleitung

Coaster

Coaster 4799N Bedienungsanleitung

Stor-It-All

Stor-It-All WS39MP Programmierhandbuch

Lexicon

Lexicon 194840161868 Bedienungsanleitung

Next AMELIA NEW 462947 Bedienungsanleitung

impekk

impekk Manual II Bedienungsanleitung

Elements

Elements Ember Nightstand CEB700NSE Bedienungsanleitung

JWA

JWA CARY 68429 Bedienungsanleitung

VIPACK

VIPACK AMORI AMKB9014 Bedienungsanleitung

Rowico

Rowico SANNA Bedienungsanleitung

Southern Enterprises

Southern Enterprises CK556000TX Bedienungsanleitung

hygena

hygena 314/5041 Bedienungsanleitung

VINNOVA

VINNOVA Kinsley 536060S Bedienungsanleitung