GLD Products Aspen Table Tennis
Item 70-0200
7 1-800-225-7593
www.gldproducts.com
Tools Required
• Hex Open End Wrenches:
8 mm, 10 mm, 13 mm, and 18 mm (not included)
• Phillips screwdriver (not included)
• Electric screwdriver may be helpful. CAUTION: You must set at
LOW TORQUE and use extreme caution because you could
overtighten the hardware, strip the screws, or damage the table.
• Rubber mallet or hammer (not included)
Precautions to Prevent Personal Injury and Damage
• Indoor only tables will not withstand outdoor conditions. If using the
table outdoors, move it indoors as soon as possible.
• Be alert for surface changes when moving the table. Cracks and
changes in the slope may cause the table to tip over.
• The table is not designed for supporting heavy loads. Do not place
heavy items on the table. Collapse of the support structure is
possible. Do not sit or stand on the top of the table.
• When using the table all the support legs and wheels must be in
contact with the floor. Failure to properly support the table may
damage the frame and table top.
• Opening or closing the table presents a risk for pinching. Keep all
children away and alert adults when moving the table top up or
down.
• Liquids left on the playing surface for extended peroids will damage
the table top. Wipe up any spills immediately.
For Outdoor Tables
• Strong winds may move or tip the table over. Take precautions as
needed to prevent damage or injury.
• Do not leave balls or paddles outside. They will likely be damaged
by outdoor conditions.
