Assa Abloy HES 9400 Series Bedienungsanleitung

9400/9500/9600 Series

Electric Strike Installation Template

3026006.001, Rev. B

HES, Inc.

10027 South 51st Street, Suite 102

Phoenix, AZ 85044

Phone: (800) 626-7590

www.hesinnovations.com

Installation Template Parts

1. 9400/9500/9600 Series Installation Template Plate

NOTE: Keeper Block is factory preset to the

9500/9500S/9600 side, but can be changed to

the 9400 side, if needed, by removing the two

6-32 x 3/8" screws.

2. Keeper Block (9400 side and 9500/9500S/9600 side)

3. 6-32 x 3/8" screws

(securing Keeper Block to Template Plate)

Other Tools Required

Screwdriver, Phillips #2

Drill Bit, #7 (0.201" or 13/64" [5.1 mm])

Tap, 1/4"-20 UNC

Product Components

Figure 2

Figure 1

IF a conversion is required,

THEN UNSCREW and CHANGE Keeper Block.

23026006.001, Rev. B

Product Description

The 9400/9500/9600 series electric strike

installation template (see Figure 1) provides an

easy means to assist with the installation of any

of the following:

• HES 9400 series slim-line, surface mounted

electric strike for use with a 1/2" throw

latchbolt

• HES 9500 series 3-hour re-rated, surface

mounted electric strike for use with a 3/4"

throw latchbolt

• HES 9600 series windstorm-rated,

surface-mounted, electric strike for use with

a 3/4" throw latchbolt

Using the Installation Template

1. REMOVE the existing strike plate from the

door.

NOTE: The 9400/9500/9600 series electric strike

installation template keeper block is

factory pre-set to the 9500/9500S/9600

electric strike position. The keeper block

would need to be repositioned to the 9400

position for use with the 9400 series

electric strike.

2. CONFIGURE template for the appropriate

strike (see Figure 2).

[a] REMOVE the two 6-32 x 3/8" screws

securing keeper block to the template

plate.

[b] ROTATE the keeper block to the proper

position (at side with correct electric

strike number showing should face to the

left side of the template plate).

[c] SECURE the keeper block to the template

plate with the two 6-32 x 3/8" screws.

NOTE: The 9400/9500/9600 series electric

strike installation template has magnetic

tape to keep it in place on the metal

door frame.

3. ALIGN the template on the door frame, and

ENSURE the door latchbolt is properly aligned

both horizontally and vertically with respect

to the keeper block.

NOTE: Corbin Russwin ED4200, ED5200

and Yale 7100 rim exit devices require

that the deadlatch be above the

deadlatch vertical alignment line etched

on the template in order to latch

properly.

4. DETERMINE the horizontal centerline of the

exit device deadlatch to the keeper block

using the center alignment sight in the

template, and ADJUST as necessary (see

Figure 1).

5. OPEN door, leaving the template in place.

6. MARK the upper and lower positions for

the electric strike mounting holes using the

"PRE-DRILL WITH 0.201 (#7 bit)" holes on

the template, the power wire exit hole, and

the LBM/LBSM wire exit hole (as required).

7. CENTER PUNCH and DRILL the electric strike

mounting holes, wire exit hole, and

LBM/LBSM hole using a #7 drill bit

(approximately 13/64").

8. TAP the drilled electric strike mounting holes

using the 1/4"-20 UNC tap.

9. TEST FIT the electric strike to ensure full

deadlatch engagement.

10. INSTALL electric strike in accordance with

installation instructions.

Dieses Handbuch passt für folgende Modelle

Andere Assa Abloy Türschloss Handbücher

Assa Abloy

Assa Abloy Sargent PE8500 Series Bedienungsanleitung

Assa Abloy

Assa Abloy 8400 Bedienungsanleitung

Assa Abloy

Assa Abloy MSL mFlipLock basis Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT IN Series Bedienungsanleitung

Assa Abloy

Assa Abloy effeff 843 Bedienungsanleitung

Assa Abloy

Assa Abloy ePED 1386-00 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 5300 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin SE LP10 CL3360 Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent 6-Line Bedienungsanleitung

Assa Abloy

Assa Abloy TD0192 Bedienungsanleitung

Assa Abloy

Assa Abloy CLIQ eCLIQ Connect key Bedienungsanleitung

Assa Abloy

Assa Abloy Conrbin Russwin IN120 WiFi Bedienungsanleitung

Assa Abloy

Assa Abloy EL580 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin MP9800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin FE6600 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin Access 600 CL33600 TCRNE1... Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent AL-PE80 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT7800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy multi-t-lock Code Handle Window Bedienungsanleitung

Assa Abloy

Assa Abloy Code Handle Handbuch

Assa Abloy

Assa Abloy Corbin Russwin Access 600 TCRNE1 Series Bedienungsanleitung

Assa Abloy

Assa Abloy RIXSON 93 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin Access 800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale YDLL/BLK Fehlerbehebungshandbuch

Beliebte Türschloss Handbücher anderer Marken

Iseo

Iseo MA1A Bedienungsanleitung

ID Lock

ID Lock 150 Bedienungsanleitung

Lockly

Lockly ACCESS TOUCH PRO Bedienungsanleitung

iLoq

iLoq G50S Bedienungsanleitung

SDC

SDC Z7835 Bedienungsanleitung

ilco

ilco 452 Bedienungsanleitung

Samsung

Samsung shs-h705 Bedienungsanleitung

TRU-BOLT

TRU-BOLT 08102017 Bedienungsanleitung

CDVI

CDVI 500-LADJ Bedienungsanleitung

Igloohome

Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung

eSSL

eSSL FL-300 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM GK 50 Benutzerhandbuch

SCOOP

SCOOP Pullbloc 4.1 FS Panik Bedienungsanleitung

Yale

Yale MORTISE 8800 SERIES Bedienungsanleitung

Siegenia

Siegenia KFV AS3500 Bedienungsanleitung

Saflok

Saflok Quantum ädesē RFID Bedienungsanleitung

ArrowVision

ArrowVision Shepherd 210 Bedienungsanleitung

Baldwin

Baldwin 009 Series Bedienungsanleitung