Assa Abloy Sargent 7800 Series Bedienungsanleitung

Installation Instructions

1-800-727-5477 • www.sargentlock.com A8130D 02/20

in part without the express written permission ofSARGENT Manufacturing Company is prohibited.

WARNING

This product can expose you to lead

which is known to the state of California

to cause cancer and birth defects or other

reproductive harm. For more information

go to www.P65warnings.ca.gov.

7800 Series

with PT Paddle Trim

Mortise Lock

7800 Series

Installation Instructions

Mortise Lock with PT Paddle Trim

A8130D 02/20

in part without the express written permission ofSARGENT Manufacturing Company is prohibited.

1-800-727-5477 • www.sargentlock.com

1 Tools Required

• Phillips Screwdriver #2

• Drill

• 7/46” Drill Bit (Wood Door)

• #8-32 Tap (Metal Door)

• 0.136 (#18) Tap Drill

• Screw Pack with screws for lockbody, fronts &

strike screws (part #77-4236)

• T15 Torx Bit

• 1/8” Allen Key

2 Installation of Lock

• Slide Lock into the door.

• Secure lock in door with (2) wood screws #12

x 1-1/4” or machine screw #12-24 x 1/2”.

• Do not tighen screws fully at this point.

TOC Table of Contents

1 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

2 Installation of Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

3 Installation of Cylinder. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

4 Determine Orientation and Handing of Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

5 Installation of Chassis. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

6 Installation of Paddles and Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

7 7800 PT Multi Function Lock Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

a How to Change Function of Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

b Item Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

c How to Change Hand of Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

7800 Series

Installation Instructions

Mortise Lock with PT Paddle Trim

A8130D 02/20

or in part without the express written permission ofSARGENT Manufacturing Company is prohibited.

1-800-727-5477 • www.sargentlock.com

3 Installation of Cylinder

For non-cylinder functions, proceed to STEP 4

• Thread the cylinder into the lockbody.

• Verify the cylinder is flush with the collar and the logo is horizontal.

• Secure cylinder with cylinder clamping screw located above the deadbolt opening.

• Verify the cylinder functions correctly.

4 Determine Orientation and Handing of Trim

The trim can be mounted vertically or horizontally.

• Down or horizontal paddle orientation is required for cylinder side of door.

• Horizontal paddle orientation is required if thumb turn or an emergency release is used.

• To change from PUSH to PULL orientation, chassis will need to be turned 180º and paddle

installed in the correct direction.

NOTE: Chassis is packed with the paddle attached. Remove paddle before installing. Before

installing chassis to door, confirm the spring orientation is correct.

7800 Series

Installation Instructions

Mortise Lock with PT Paddle Trim

A8130D 02/20

in part without the express written permission ofSARGENT Manufacturing Company is prohibited.

1-800-727-5477 • www.sargentlock.com

5 Installation of Chassis

• Check handing of chassis before installing

mounting screws.

• Insert the (2) mounting posts through the out-

side chassis, then secure with (2) #8-32 x 5/8”

machine screws through the inside chassis.

Do not tighten fully at this point.

• Lockbody screws on edge of door are to be se-

curely fastened at this point.

• Level chassis.

• Tighten thru bolt screws.

• Attach the outside front plate to lock front with

(2) #8-32 x 1/4” flat head screws.

• Tighten all screws firmly. Do not over tighten.

6 Installation of Paddles and Covers

•Insert paddle in slot.

• Install set screw.

•Slide cover over paddle and align with mounting holes.

• Install cover screws.

7800 Series

Installation Instructions

Mortise Lock with PT Paddle Trim

A8130D 02/20

or in part without the express written permission ofSARGENT Manufacturing Company is prohibited.

1-800-727-5477 • www.sargentlock.com

The green catch screw must be located as

designated on lock case to create desired function.

3 locations:

•One for 05, 37 & 38 functions

(15 function in unlocked position)

•One for 04, 06, 13, 17 & 31 functions

•One for 36 function

NOTE: When moving green catch screw to 04, 06,

13, 17 & 31 functions, hub position must be at

45° as shown on lockcase.

NOTE: 17 function requires both levers to be rigid.

Rotate red locking piece 90°, so red surface of

slide faces back of lockbody.

7800PT lockbody is required when using PT pad-

dle trim, 8200 lever lockbody will not function

properly with the PT trim

Function Outside

Lever Inside Lever Trim One

Side Kit

Outside

Cylinder

Inside

Cylinder Thumb Turn

04 X X X

05 X X X X***

06 XXX

13 X X

17 X X X X

31 XXX

36 XXX

37 X X X

38 X X X X

#41Cylinder is standard for both single & double cylinder functions for 1-3/4” thick door

NOTE: Trim-one-side functions always require an inside trim assembly which can be used on the

inside or outside of the door

7 7800 PT Multi Function Lock Instructions

a How to Change Function of Lock

b Items Needed to Create Each of the Following Functions

7800 Series

Installation Instructions

Mortise Lock with PT Paddle Trim

A8130D 02/20

in part without the express written permission ofSARGENT Manufacturing Company is prohibited.

1-800-727-5477 • www.sargentlock.com

7 7800 PT Multi Function Lock Instruction (continued)

c How to Change Hand of Lock

NOTE: Red surface of locking piece must face secure

(keyed/locked) side of door.

To rotate locking piece:

1. Position lockbody with red surface of locking piece visible.

2. Insert blade type screwdriver into locking piece slot to rotate

locking piece.

3. Push locking piece toward back of lock body and rotate 180°

until RED surface shows on opposite side.

NOTE: 04, 06, 13, 17 and 31 Functions require:

(a) Green catch screw to be removed.

(b) Rotate hub 45° to vertical position.

(d) Red surface faces locked side of door.

(e) Rotate hub to the original 45° position as shown on lock-

case.

(f) Green catch screw is then reinstalled.

NOTE: Beveled surface of latch must face strike. The deadlatch is self

adjusting. To change hand of latch:

2. Rotate screwdriver 90º to push latch out

until back of latch clears lock front. Then

rotate latch 180º. Latch will then re-enter

lockbody. (Note: Latch can not be un-

screwed)

7800 Series

Installation Instructions

Mortise Lock with PT Paddle Trim

A8130D 02/20

or in part without the express written permission ofSARGENT Manufacturing Company is prohibited.

1-800-727-5477 • www.sargentlock.com

Founded in the early 1800s, SARGENT®is a market leader in locksets, cylinders, door closers, exit devices,

electro-mechanical products and access control systems for new construction, renovation, and replacement

applications. The company’s customer base includes commercial construction, institutional, and industrial

markets.

part without the express written permission ofSARGENT Manufacturing Company is prohibited..

SARGENT Manufacturing Company

100 Sargent Drive

New Haven, CT 06511 USA

800-727-5477

www.sargentlock.com

A8130D

02/20

Inhaltsverzeichnis

Andere Assa Abloy Türschloss Handbücher

Assa Abloy

Assa Abloy EMTEK Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 2828 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Emtek F20 Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent Profile G1 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent PE8500 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Lockwood 8816 Bedienungsanleitung

Assa Abloy

Assa Abloy MSL mFlipLock basis Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Pro SL Technische Daten

Assa Abloy

Assa Abloy Emtek Modern Keypad Entryset Betriebsanleitung

Assa Abloy

Assa Abloy Adams Rite 3000SE Bedienungsanleitung

Assa Abloy

Assa Abloy KESO Genie Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Assure Lock YRD620 Technische Daten

Assa Abloy

Assa Abloy ANYKEY Bedienungsanleitung

Assa Abloy

Assa Abloy effeff 827A-IP Bedienungsanleitung

Assa Abloy

Assa Abloy v.G1 Sargent Bedienungsanleitung

Assa Abloy

Assa Abloy Yale eBoss 886F Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Keyfree Connected Smart Lock Bedienungsanleitung

Assa Abloy

Assa Abloy CYE321 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT7800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy 179E Benutzerhandbuch

Assa Abloy

Assa Abloy CYE345 Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent PE8800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy 81 C Series Bedienungsanleitung

Assa Abloy

Assa Abloy ESA500 Installationshandbuch

Beliebte Türschloss Handbücher anderer Marken

Iseo

Iseo MA1A Bedienungsanleitung

ID Lock

ID Lock 150 Bedienungsanleitung

Lockly

Lockly ACCESS TOUCH PRO Bedienungsanleitung

iLoq

iLoq G50S Bedienungsanleitung

SDC

SDC Z7835 Bedienungsanleitung

ilco

ilco 452 Bedienungsanleitung

Samsung

Samsung shs-h705 Bedienungsanleitung

TRU-BOLT

TRU-BOLT 08102017 Bedienungsanleitung

CDVI

CDVI 500-LADJ Bedienungsanleitung

Igloohome

Igloohome Deadbolt 2S Metal Grey Montage- und Wartungsanleitung

eSSL

eSSL FL-300 Bedienungsanleitung

Dorma

Dorma MUNDUS PREMIUM GK 50 Benutzerhandbuch

SCOOP

SCOOP Pullbloc 4.1 FS Panik Bedienungsanleitung

Yale

Yale MORTISE 8800 SERIES Bedienungsanleitung

Siegenia

Siegenia KFV AS3500 Bedienungsanleitung

Saflok

Saflok Quantum ädesē RFID Bedienungsanleitung

ArrowVision

ArrowVision Shepherd 210 Bedienungsanleitung

Baldwin

Baldwin 009 Series Bedienungsanleitung