Assa Abloy Norton 1600 Series Bedienungsanleitung

Non Hold Open Arm Models

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9316-2535-020 Rev 3 04/20

1600

Corrosion Resistant

Non Handed Door Closer

Regular Arm

Top Jamb Mount

Parallel Arm

Sized

(Sizes 3,4)

1603BCSS

1604BCSS

Adjustable

(Sizes 1-6)

1601SS

Ce produit peut vous exposer au plomb qui, dans l’état de la Californie,

est reconnu pour causer le cancer, des anomalies congénitales ou d’autres

problèmes de reproduction. Pour plus d’informations, visitez:

www.P65warnings.ca.gov.

This product can expose you to lead which is known to the state of

California to cause cancer and birth defects or other reproductive harm.

For more information go to www.P65warnings.ca.gov.

WARNING

Regular Arm Top Jamb Mount Parallel Arm

Optional Components

Right Hand Door - RH

Left Hand Reverse - LHR

Left Hand Door - LH

Right Hand Reverse - RHR

Right Hand Door - RH

Left Hand Reverse - LHR

Left Hand Door - LH

Right Hand Reverse - RHR

Right Hand Door - RH

Left Hand Reverse - LHR

Left Hand Door - LH

Right Hand Reverse - RHR

Tools Needed

TO DETERMINE

HAND OF

YOUR DOOR:

LEFT

HAND

DOOR

RIGHT

HAND

DOOR

Right Hand

Reverse

Left Hand

Reverse

To Determine Your Hand of Door: To Identify Your Model:

1-6 = 1601SS

3 = 1603BCSS

4 = 1604BCSS

Included Components (See page 2 for mounting hardware)

1618AS Parallel

Arm Bracket

(Used with

Parallel Arm

Installation Only)

Pinion Cap

Main Arm

Pinion Screw

Screw Pack

Closer

1/8" Hex Wrench

Regular Arm/

Top Jamb Shoe

Main Arm

Connecting Rod

Forearm

Screw

Arm Assembly

Forearm T

ube

Hinge Edge of Door

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9316-2535-020 Rev 3 04/20

• For special applications, a separate door and frame

preparation template is packed with these instructions. Use

this instruction sheet for installation sequence and closer

adjustments only.

• Doors should be hung on ball bearing or anti-friction hinges.

• A separate door stop is recommended.

Mounting Hardware Door or Frame Drill

Closer, Arm Shoe or Optional PA Bracket:

1/4-14 x 1-1/2 Oval Flat Head Mach. Screw Wood 3/16" (4.76mm)

Closer, Arm Shoe or Optional PA Bracket:

1/4-20 x 3/4 Oval Flat Head Mach. Screw Metal Drill #7 (.201 dia. or 5.10mm)

Tap 1/4-20

Arm Shoe to Optional PA Bracket:

1/4-20 x 1/2 Oval Flat Head Mach. Screw

Closer:

Sleeve Nut and Bolt (SNB)

(optional)

Hollow Metal 9/32" (7.00mm) thru

3/8" (9.50mm) door face opposite to closer

Aluminum or Wood 3/8" (9.50mm) thru

Closer:

Thru Bolt and Grommet Nut (TBGN)

(optional)

All

9/32" (7.00mm) thru

3/8" (9.50mm) dia. x 3/8" (9.500mm) deep,

door face opposite to closer

• Always consult door/frame manufacturer for fastener

compatibility.

• Door and frame must be properly reinforced.

• Adjust closing time speed between 3 and 7 seconds from

90° to 0°.

• These door closers should NOT be installed on exposed side

(weather side) of exterior doors.

• Dimensions are given in inches (millimeters).

Closer Adjustments

Do not over tighten

cap or cover screws.

Pinion Cap or Cover

Regular Arm Top Jamb Mount Parallel Arm

ATTENTION:

An incorrectly installed or improperly adjusted door closer can

cause property damage or personal injury. These installation

instructions should be followed to avoid the possibility of

misapplication or misadjustment.

Latch Backcheck

Use provided hex wrench

to turn valves. NEVER

force valves out of closer.

NEVER completely close

backcheck valve.

Door must be open to

adjust spring closing

power. Refer to chart. Do

not use a power drill.

Warranty will be void.

Sweep

1601SS

1600SS Non Hold Open Closer

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9316-2535-020 Rev 3 04/20 3

1600SS Regular Arm Installation (Right Hand Shown)

Opening

To 100°

101° to 120°

*121° to 180°

(178)

(152)

3-1/2

(89)

Dimension "A"

*Door/Wall/Hardware/Jamb

conditions permitting

2. Mount closer to door.

(152)

1-3/4

(44)

1-1/4

(32)

3/4

(19) 9-1/16

(230)

7/8

(22)

You’ve installed the 1600SS Non Hold Open Closer - Regular Arm.

🛑

Go to page 2 for closer adjustments and decorative cap or cover installation.

1. Prepare door and frame.

7-1/2%

Stronger

7-1/2% Weaker

4a. Choose arm placement

in shoe.

3. Take arms apart at elbow.

90°

4b. Install separate arms. 5. Connect arms and adjust connecting rod length to

set arm elbow 90° to door.

1st

2nd

Spring Power

Preload

Position

RH and LH:

Position at at S

Connecting

arms at proper

preload position

may take several

attempts.

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9316-2535-020 Rev 3 04/20

90°

1600SS Top Jamb Mount Installation (Right Hand Shown)

2. Mount closer to frame.

Opening

To 100°

101° to 120°

*121° to 180°

7-1/2

(191)

(152)

3-1/2

(89)

Dimension "A"

*Door/Wall/Hardware/Jamb

conditions permitting

9-1/16

(230) 3/4

(19)

1/2

(13)

(152)

1-1/2

(38)

1-3/4

(44)

Top of

Door

4b. Install separate arms.

You’ve now installed the 1600SS Non Hold Open Closer - Top Jamb Mount.

🛑

Go to page 2 for closer adjustments and decorative cap or cover installation.

RH and LH:

Position at at S

1. Prepare door and frame.

4a. Choose arm placement

in shoe.

7-1/2%

Stronger

7-1/2%

Weaker

1st

2nd

3. Take arms apart at elbow.

Spring Power

Preload

Position

Connecting

arms at proper

preload position

may take several

attempts.

5. Connect arms and adjust connecting rod length to

set arm elbow 90° to door.

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.

80-9316-2535-020 Rev 3 04/20 5

1600SS Parallel Arm Installation (Right Hand Shown)

2. Close latch and sweep valves. 3. Install soft plate and

mount closer.

Door

Opening

To 100°

101° to 130°

131° to 180°

9-1/4

(235)

7-3/4

(197)

5-3/4

(146)

7-5/8

(194)

6-1/8

(156)

4-1/8

(105)

8-5/8

(219)

7-1/8

(181)

5-1/8

(130)

Door/Wall/Hardware/Jamb

conditions permitting

Holes for 1688

Plate only 1-1/2

(38)

(178) 4

(102)

2-1/8

(54) 3-1/4

(83)

1/2

(13)

3/4

(19)

9-1/16

(230) C

Top of

Door

Frame

2-3/4

(70) 3/8

(10)

1/2

(13)

7/16

(11)

(50)

5. Remove arm shoe and install

forearm to soft plate.

6. Place main arm on closer spindle and rotate.

IMPORTANT

1. Prepare door and frame.

4. Take arms apart at elbow.

Norton is a brand associated with ASSA ABLOY Accessories and Door Controls Group, Inc., an ASSA ABLOY Group company.

or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited. 80-9316-2535-020 Rev 3 04/20

Norton Technical Product Support:

Monroe, NC 28112 USA

Phone: 800.438.1951 ext: 6030

TechSupport.Norton@assaabloy.com

nortondoorcontrols.com

1600SS Parallel Arm Installation (Right Hand Shown) continued

7. Remove arm and attach as shown. 8. Open latch and sweep valves.

Do not completely

open valves. Valves

will leak.

Arm under tension.

Keep ngers away

from moving parts.

You’ve now installed the 1600SS Non Hold Open Closer - Parallel Arm.

🛑

Go to page 2 for closer adjustments and decorative cap or cover installation.

Left Hand

Door

Right Hand

Door

Flat

RH: Position at at B

LH: Position at at A

1st

2nd

1st

2nd

9. Connect arms and adjust connecting rod

length to set arm elbow about 1-1/2"

(38mm) from door.

Spring Power

Preload

Position

Connecting

arms at proper

preload position

may take several

attempts.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Assa Abloy Türöffnungssystem Handbücher

Assa Abloy

Assa Abloy Norton 7540STH Series Bedienungsanleitung

Assa Abloy

Assa Abloy RIXSON 91DCP Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 9510 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale 1105 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 5700P Series Bedienungsanleitung

Assa Abloy

Assa Abloy RIXSON 185 Quick Spotter Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SL500 Bedienungsanleitung

Assa Abloy

Assa Abloy 1370 Bedienungsanleitung

Assa Abloy

Assa Abloy G-CO-CS Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6300 Series Kurzanleitung

Assa Abloy

Assa Abloy Corbin Russwin DC8200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin DC6200 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 7970DPS-B Series Bedienungsanleitung

Assa Abloy

Assa Abloy Adams Rite EX89 Betriebsanleitung

Assa Abloy

Assa Abloy Norton 1600H Series Bedienungsanleitung

Assa Abloy

Assa Abloy MAB 609 + AC593 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton PR1601 Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent 1331 Bedienungsanleitung

Assa Abloy

Assa Abloy DC140 Bedienungsanleitung

Assa Abloy

Assa Abloy 332 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 6011 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent FIREGUARD 2408 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT FM8700 Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin ED8200A Series Bedienungsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt

GEZE

GEZE ECturn Bedienungsanleitung

Chamberlain

Chamberlain T Bedienungsanleitung