Assa Abloy Norton 9510 Series Bedienungsanleitung

80-9395-9516-020 REV. 2 (01-18)

Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.

Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

ASSA ABLOY

Slide Track Application

(100° Maximum Door Swing)

H.O. Bumper Stop

9510 Series

Installation Instructions

PS9500ST / PS9500STH Series

Half-Size 1 thru 6

Hinge (Push) Side

Door Application

9540 Stop Mounted

PUSH SIDE

9500ST / 9500STH Series

Multi-Sized 1 thru 6

Hinge (Pull) Side

Door Application

9530 Door Mounted

PULL SIDE

Approved 2018-01-19

80-9395-9516-020 REV. 2 (01-18)

Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.

Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

ASSA ABLOY

IMPORTANT:

BEFORE

INSTALLING:

An improperly installed or incorrectly adjusted door closer may cause property

damage or personal injury; and will void product warranty.

To avoid personal injury, DO NOT DISASSEMBLE THIS DOOR CLOSER BODY.

Door closers must be securely fastened to a properly reinforced door and frame

with fasteners provided.

Door closers with the HOLD OPEN TRACK option are not permitted to be

installed in fire door assemblies.

ADA compliant closers are: 9530 & 9540.

The Americans with Disabilities Act (ADA) requires that doors having door closers

have an opening force not to exceed 5 lbf.

**NOTE: These forces are for standard templating with bearing type hinges and do not account for pressure differentials and draft.

The door closer's power size adjustment feature may require adjustment to its

lowest setting to comply with ADA opening force guidelines.

TO DETERMINE

HAND OF

YOUR DOOR:

LEFT

HAND

DOOR

RIGHT

HAND

DOOR

RHR LHR

2 6' "

3 0' "

3 6' "

*4 0' "

2 6' "

3 0' "

*3 6' "

*4 0' "

2 6' "

3 0' "

3 6' "

4'0"

Size of Door & Door Closer

Type

Installation Interior Exterior

In-swinging

Exterior

Out-swinging

Recommended

Closer Size

**Max.

Opening

Force

lbs/f

2 6' "

3 0' "

3 6' "

4'0"

PULL

SIDE

Mounting

PUSH

SIDE

Mounting

Page 2

Approved 2018-01-19

80-9395-9516-020 REV. 2 (01-18)

Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.

Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

ASSA ABLOY

Components: Figure 1

Plastic Cover

(Standard) Screw Pack

Closer Mounting

Bracket

Closer

Pull Side Track

Arm

Adjusting

Rod

Push Side Track

Arm Adjusting

Rod

Page 3

Approved 2018-01-19

80-9395-9516-020 REV. 2 (01-18)

Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.

Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

ASSA ABLOY

9/32” (7 mm);

3/8” (9.5 mm) dia. x

3/8” (9.5 mm) deep on

door opposite to closer

Standard

Optional

Through-bolts and

grommet-nuts All

Preparation for Fasteners Figure 2

Door or Frame

Fasteners Drill-Sizes

#12-14 Self-Drilling Screw Wood

(see Note) 3/16” (4.30 mm)

1/4” - 20 machine screw Metal Drill: #7 (0.201” dia.)

Tap: 1/4” - 20

Hollow

Metal

9/32” (7 mm) through;

3/8” (9.5 mm) door face

opposite to closer

Aluminum

or Wood 3/8” (9.5 mm) through

Aluminum

or Metal No drill required

Page 4

Note: Wood doors/frames: drill 1/8" (3.2) pilot hole when using Self-Drilling Screws.

Always consult door/frame manufacturer for fastener compatibility with the material of their door/frame.

Approved 2018-01-19

80-9395-9516-020 REV. 2 (01-18)

Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.

Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

ASSA ABLOY

9530 Pull Side Track Template

• Door will travel additional 5° to dead stop.

• Door hold open position adjustable from 85° to 120° of door opening.

LHINGE OR PIVOT

*5-5/8

(143)

FRAME LINE

MOUNTING BRACKET

TOP OF DOOR

(254)

(25)

1/2

(13)

*5-1/4

(133)

(76)

4-3/4

(121)

(76)

3/8

(10)

(279.4)

(101.6)

Track Mounting Holes

(558.8)

1-7/16

(37)

1-5/8

(41)

9588 DROP PLATE

Mounting Holes (4)

NOTES:

• Check hand of door, see page 2.

• Right Hand Application Shown. Left Hand Opposite.

• Dimensions given in inches (mm). Do Not Scale Drawing.

• Closer must be installed mounted level to ensure proper closer performance.

• Minimum clearance required over door: 2" (51).

• Minimum top rail: Without drop plate 3" (76), With drop plate 1-1/4" (32).

Page 5

Approved 2018-01-19

80-9395-9516-020 REV. 2 (01-18)

Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.

Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

ASSA ABLOY

• Select angle of opening and use dimensions shown in

template to locate 4 holes on door for Closer Mounting

Bracket (or 4 holes for optional drop plate) and 3 holes

on jamb for track.

For applications that are different from above, a separate

template will be supplied for door and frame preparation.

• Prepare door and frame for fasteners using "Preparation

for Fasteners" chart, Figure 2, Page 4.

• Fasten Closer Mounting Bracket to door. Fasten optional

drop plate to door, only if it is required for the door

conditions.

• Install closer body with tube end away from hinge, with

valves: Down for Left Hand door / UP for Right Hand

door.

• Attach Track to Frame. With spring buffer toward hinge

edge of frame and open side facing down, fasten track

assembly to frame.

• Adjust Arm to Shortest Length. Install 9/64" hex drive

socket head screw from screw pack to the arm's shortest

length as shown.

9/64" Hex Drive Machine Screw

• Place Slide Arm on Pinion Shaft. Place the slide arm and

two washers on the pinion shaft, indexed as shown below.

Secure the arm with the arm screw and washer as

indicated.

Adjusting Tube

Retainer Clip

Attach Arm

Stud to Slide

• Insert Arm Stud into Slide Block

1) Insert the arm stud into the slide block in the track

assembly.

2) Secure by pushing in on the retainer clip that extends

from the slide block in the track, until it is flush with the

slide block.

• Adjusting Door Opening / Hold Open Angle

Open the door until the slider is against the cushioned stop

or engaged in hold open (A1 Option only).

Remove the 9/64" hex drive socket head screw from the

arm. Open the door to the desired angle and install the hex-

drive screw into the hole in the adjusting rod that is aligned

with the hole in the adjusting tube.

9/64" Hex Drive

Machine Screw

• Make closer adjustments using information on page 9, then

install closer cover. See Page 6 for ENGAGE/DISENGAGE

Hold Open instructions.

Page 6

9530 Pull Side Track Installation Sequence

RIGHT HAND DOOR SHOWN

Approved 2018-01-19

80-9395-9516-020 REV. 2 (01-18)

Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.

Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

ASSA ABLOY

Mount the Track CENTERED on the Stop

with the following minimum distances

from the door side of the stop.

1-3/4 (45)

1-1/2 (38)

1 (25)

3/4 (19)

A Min

HINGE OR PIVOT

FRAME LINE

DOOR

Track Mounting Holes

Closer Mounting Bracket

(254)

1-3/16

(30)

(76)

4-3/4

(121)

(76)

(51)

1-5/8

(41)

3/8

(10)

(25)

3-9/16

(90)

4-7/8

(124)

(203)

21-5/8

(549)

Track Mounting Holes

DOOR STOP

9588 DROP PLATE

Mounting Holes (4)

(356)

NOTES:

• Check hand of door, see page 2.

• Right Hand Application Shown. Left Hand Opposite.

• Dimensions given in inches (mm). Do Not Scale Drawing.

• Closer must be installed in a true horizontal plane to ensure proper closer

performance.

• Minimum stop width: See Dimension A on the chart below.

• Minimum top rail: Without drop plate 5-1/2" (140), With drop plate 2-1/2" (64).

• Door will travel additional 5° to dead stop.

• Door hold open position adjustable from 85° to 110° of door opening.

9540 Push Side Track Template

Page 7

Approved 2018-01-19

80-9395-9516-020 REV. 2 (01-18)

Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.

Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

ASSA ABLOY

• Select angle of opening and use dimensions shown in

template to locate 4 holes on door for Closer Mounting

Bracket (or 4 holes for optional drop plate) and 4 holes

on jamb for track.

For applications that are different from above, a separate

template will be supplied for door and frame preparation.

• Prepare door and frame for fasteners using "Preparation

for Fasteners" chart, Figure 2, Page 4.

• Fasten Closer Mounting Bracket to door. Fasten optional

drop plate to door, only if it is required for the door

conditions.

• Install closer body with tube end TOWARDS hinge, with

valves: DOWN for Left Hand door / UP for Right

Hand door.

• Attach Track to Frame. With spring buffer toward hinge

edge of frame and open side facing down, fasten track

assembly to frame.

• Adjust Arm to Shortest Length. Install 9/64" hex drive

socket head screw from screw pack to the arm's shortest

length as shown.

9/64" Hex Drive Machine Screw

• Place Slide Arm on Pinion Shaft. Continued at right, place

the slide arm and two washers on the pinion shaft,

indexed as shown at right. Secure the arm with the arm

screw and washer as indicated. • Make closer adjustments using information on page 9,

then install closer cover. See Page 10 for

ENGAGE/DISENGAGE Hold Open instructions.

Retainer Clip

Attach Arm

Stud to Slide

• Insert Arm Stud into Slide Block

1) Insert the arm stud into the slide block in the track

assembly.

2) Secure by pushing in on the retainer clip that extends

from the slide block in the track, until it is flush with the

slide block.

• Adjusting Door Opening / Hold Open Angle

Open the door until the slider is against the cushioned stop

or engaged in hold open.

Remove the 9/64" hex drive socket head screw from the

arm. Open the door to the desired angle and install the

hex-drive screw into the hole in the adjusting rod that is

aligned with the hole in the adjusting tube.

9/64" Hex Drive

Machine Screw

Adjusting Tube

Rotate

Page 8

9540 Push Side Track Installation Sequence

RIGHT HAND DOOR SHOWN

Approved 2018-01-19

80-9395-9516-020 REV. 2 (01-18)

Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.

Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

ASSA ABLOY

Interior Exterior

Swing

Exterior

Out

Swing

Size of Door

Equivalent

Closer Size

(Approx.)

2 4 (712)' "

2 6 (764)' "

3 0 (915)' "

3 6 (1067)' "

2 6 (764)' "

3 0 (915)' "

2 6 (764)' "

3 0 (915)' "

3 6 (1067)' "

4 0 (1219)' "

2-7

7-11

11-15

15-17

Spring Power

Adjustment

No. Full Turns

Clockwise

LATCHING

SPEED VALVE BACKCHECK

INTENSITY VALVE

CLOSING

SPEED VALVE

SPRING POWER ADJUSTER

(1/4 ALLEN WRENCH)"

SPRING POWER ADJUSTMENT CHART

Spring Power Adjustment

Size 1 thru 6 Adjustment See Chart

All 9500 closers are factory set at an approximate Size 3.

Adjust closer as necessary for door size using this chart.

Readjustment may be required to suit prevailing conditions.

Locate spring power adjuster from

Illustration below

Backcheck Intensity Valve

Factory preset for typical doors.

Turn valve COUNTER-CLOCKWISE to reduce backcheck

or CLOCKWISE to increase backcheck. (Backcheck should

be set to give a soft cushioning action, not a sudden stop.)

Latching Speed Valve

Factory preset for typical doors.

After closing speed has been obtained, turn latching speed valve

CLOCKWISE to SLOW latching or COUNTER-CLOCKWISE to

SPEED latching for last 2 to 5 of door travel." "

NOTE: Set combination of CLOSING and LATCHING speeds to

between 3 and 7 seconds Use of door by handicapped,

elderly or small children may require even greater

closing time.

Closing Speed Valve

Factory preset for typical doors.

To adjust speed of door closing from fully open to a position

2 to 5 from closed, turn Closing Speed Valve CLOCKWISE" "

to SLOW closing, COUNTER-CLOCKWISE to SPEED

closing.

Delayed Action Valve

Factory preset for typical doors.

Turn valve CLOCKWISE to SLOW closing, COUNTER-

CLOCKWISE to SPEED closing. Delayed action may be

adjusted from 20 seconds to 90 seconds, depending on

degree of door swing. Delay occurs at the beginning of the

door closing cycle from fully open down to 70°, where the

closing speed valve then begins its control.

Option

(1/8 Allen Wrench Provided)

Date Stamp

(on end of closer)

MM-YY

OPTIONAL

DELAYED

ACTION VALVE

MM = Month

YY = Year

Unit Adjustment

Page 9

Approved 2018-01-19

80-9395-9516-020 REV. 2 (01-18)

Norton® is a registered trademark of Yale Security Inc., an ASSA ABLOY Group company.

Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.

ASSA ABLOY

Hold Open Models Only:

Turn Screw 1/2 Revolution

to Engage / Disengage

Hold Open.

Engage/Disengage Hold Open

Engage

Disengage

Hold Open Roller

Shown in ENGAGED

Position

Page 10

Installing Cover

Insert is removable.

Place in unused opening.

Plastic Cover

(Standard)

3000 Highway 74 East • Monroe, NC 28112

Tel: (877)- • Fax: (800)-338-0965974-2255

www.nortondoorcontrols.com

ASSA ABLOY

Approved 2018-01-19

Andere Handbücher für Norton 9510 Series

Inhaltsverzeichnis

Andere Assa Abloy Türöffnungssystem Handbücher

Assa Abloy

Assa Abloy Norton Narrow Profile Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 281 Series Bedienungsanleitung

Assa Abloy

Assa Abloy DC3210 Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SW300 Handbuch

Assa Abloy

Assa Abloy 332 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SECURITRON DEM680E Series Handbuch

Assa Abloy

Assa Abloy NORTON RIXSON 1600 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 7500H Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin DC6210 Series Bedienungsanleitung

Assa Abloy

Assa Abloy RIXSON W91DCP Bedienungsanleitung

Assa Abloy

Assa Abloy King 640 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 9500 Series Bedienungsanleitung

Assa Abloy

Assa Abloy effeff 828 Bedienungsanleitung

Assa Abloy

Assa Abloy G-CO-C Bedienungsanleitung

Assa Abloy

Assa Abloy SW60 Bedienungsanleitung

Assa Abloy

Assa Abloy NORTON RIXSON 1600H Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 1431 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Norton 7500 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SL500 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 351 Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent 2409 Series Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 1331 Bedienungsanleitung

Assa Abloy

Assa Abloy Norton UniTrol UNI-1600BC Series Bedienungsanleitung

Assa Abloy

Assa Abloy Besam SL500 Bedienungsanleitung

Beliebte Türöffnungssystem Handbücher anderer Marken

Pamex

Pamex KT-INP35 Bedienungsanleitung

Cal-Royal

Cal-Royal N-F77CVR Bedienungsanleitung

Scrigno

Scrigno OPEN1000 Bedienungsanleitung

TriMark

TriMark UM 34 Bedienungsanleitung

BFT

BFT WIND RMB 130B 200 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Besam

Besam Swingmaster MP Leitfaden

CRL

CRL SENIOR PRIMA Bedienungsanleitung

GAL

GAL MOVFR Technisches Datenblatt

Normstahl

Normstahl IDO7 Bedienungsanleitung

Häfele

Häfele Finetta T 70 VF Bedienungsanleitung

AGS

AGS D-PL Handbuch

Stanley

Stanley MA900ñ Montageanleitung

WITTUR

WITTUR Hydra Plus UD300 Handbuch

Alutech

Alutech TR-3019-230E-ICU Montage- und Bedienungsanleitung

MPC

MPC ATD ACTUATOR 50 ATD-313186 Operating and Technisches Datenblatt

GEZE

GEZE ECturn Bedienungsanleitung

Chamberlain

Chamberlain T Bedienungsanleitung