Assa Abloy Assa compact 3000 Series Bedienungsanleitung

3000 Series Locks

FITTING INSTRUCTIONS

Maximum gap between faceplate & striking plate not to exceed 3mm, with door closed.

153

*26.5

*o10

113

Drill for

other handles

Drill for

ASSA round

rose handles

o20

(o25 for Escape Nightlatch,

Escape Sash Lock and

Escape Deadlock)

See note on front cover

(o25 for Funxion handles)

Drill for DIN

Severe Duty

handles

Centre

line of

door

See note on front cover

Drill as required for handles to be used.

Drill holes for cylinder, handle spindle and handle

screws as appropriate for the products to be fitted.

*NOTE: On Bathroom lock only, drill holes in shaded

area instead of normal cylinder cut-out.

LOCKS WITH DIFFERENT INTERNAL AND EXTERNAL FUNCTIONS -

Single cylinder only (without thumbturn): Standard specification for 3069B,

3061, 3059 and 3062. On the OUTSIDE face of the door, drill and prepare oval

hole for cylinder fitting, ensuring hole does not pass beyond the centreline of the

door.

Half Set of Handles: Standard specification for 3069, 3069B, 3061, 3059 and

3062. On the INSIDE face of the door, drill a 25mm diameter hole for handle

spindle, ensuring hole does not pass beyond the centreline of the door.

Internal Status Indicator 3508: Standard specification for 3020.

On the INSIDE face of the door, drill a central 10mm diameter hole, ensuring hole

does not pass beyond the centreline of the door.

ASSA ABLOY Door Solutions, Units 3-4, ZK Park, 23 Commerce Way, Croydon, CR0 4ZS

Telephone: 020 8688 5191

CF2 10/07

On 44mm doors, fold along line and place around edge of door

30*

o10

(When fitting 3020 with

3508 - Drill hole on

INSIDE FACE of door

only)

See note on front cover

*o6

*o7

TEMPLATE

Maximum gap between faceplate & striking plate not to exceed 3mm, with door closed.

153

*26.5

*o10

113

Drill for

other handles

Drill for

ASSA round

rose handles

o20

(o25 for Escape Nightlatch,

Escape Sash Lock and

Escape Deadlock)

See note on front cover

(o25 for Funxion handles)

Drill for DIN

Severe Duty

handles

Centre

line of

door

See note on front cover

Drill as required for handles to be used.

Drill holes for cylinder, handle spindle and handle

screws as appropriate for the products to be fitted.

*NOTE: On Bathroom lock only, drill holes in shaded

area instead of normal cylinder cut-out.

On 44mm doors, fold along line and place around edge of door

o10

(When fitting 3020 with

3508 - Drill hole on

INSIDE FACE of door

only)

See note on front cover

*o6

*o7

30*

FITTING CYLINDERS

To fit a Euro Profile cylinder, simply remove the

faceplate, place the cylinder in the cylinder hole, and

insert the fixing screw through the forend into the

cylinder.

When fitting an Oval Profile cylinder, the two plastic

inserts in the cylinder hole should first be levered out

with a screwdriver or similar tool; then proceed to fit

new cylinders as above.

CHANGING HAND

SASH LOCK, LATCH

1) Remove the faceplate from the lock.

2) Rotate the latchbolt to the desired handing.

3) Replace the faceplate and test the operation of the

lock. Locks with brass finish: remove temporary M4

screw from faceplate and fit brass M4 screw.

BATHROOM LOCK, ESCAPE SASH LOCK

1) Remove the faceplate from the lock with the

deadbolt extended.

2) Retract the latchbolt by placing a lever handle

spindle into the handle follower and turning it.

3) With the latchbolt retracted, remove the handing

screw (illustrated).

4) Turn the handle back until it is possible to reverse

the latchbolt (do not completely release the

handle).

5) Fully retract the handle again and replace the

handing screw and faceplate. Release the handle

and replace the faceplate.

6) Test the operation of the lock.

NIGHTLATCH

1) Remove the faceplate.

2) Insert a screwdriver or similar tool into the handing

hole in the rear of the case.

3) Push the latchbolt clear of the forend and rotate to

the correct hand.

4) Insert a screwdriver or similar tool into the

deadlocking ram handing slot.

5) Push the deadlocking ram clear of the forend and

rotate to the correct hand.

6) Replace the faceplate and test the operation of the

lock.

3069B EMERGENCY DEADLOCK

The lock is supplied with two self adhesive labels. Please ensure the appropriate label

(depending on the handing of the door) is attached to the inside of the door.

TEMPLATE

Euro Profile Oval Profile

Latchbolt

Faceplate

Handing

Screw

Latchbolt

Handle

Follower

Faceplate

Handing

Slot

Deadlocking

Ram

Latchbolt

Handling

Hole

Faceplate

Andere Assa Abloy Sperren Handbücher

Assa Abloy

Assa Abloy Corbin Russwin UT5200 Series Kurzanleitung

Assa Abloy

Assa Abloy Whitco Cyl4 Window Bolt Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin IN100 Bedienungsanleitung

Assa Abloy

Assa Abloy SARGENT 1655 Bedienungsanleitung

Assa Abloy

Assa Abloy HES Aperio K100 Handbuch

Assa Abloy

Assa Abloy EL595 Bedienungsanleitung

Assa Abloy

Assa Abloy Securitron TJ-38 TOP JAM KIT Bedienungsanleitung

Assa Abloy

Assa Abloy OneSystem 319N Montageanleitung

Assa Abloy

Assa Abloy MUL-T-LOCK SC110 Bedienungsanleitung

Assa Abloy

Assa Abloy OneSystem 819N Bedienungsanleitung

Assa Abloy

Assa Abloy Securitron SAM Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent IN100 Bedienungsanleitung

Assa Abloy

Assa Abloy OneSystem 819N Installationsanleitung

Assa Abloy

Assa Abloy 118F A71 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Yale Real Living Assure Lock YRD426 Bedienungsanleitung

Assa Abloy

Assa Abloy Sargent Passport 1000 Series Bedienungsanleitung

Assa Abloy

Assa Abloy effeff ePED 1386S00 Bedienungsanleitung

Assa Abloy

Assa Abloy ALARM CONTROLS Magnalock 1200DE Delayed... Handbuch

Assa Abloy

Assa Abloy Securitron Shear Aligning Magnalock SAM... Bedienungsanleitung

Assa Abloy

Assa Abloy Securitron Magnalock Series Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin HPSK Bedienungsanleitung

Assa Abloy

Assa Abloy Corbin Russwin FE6800 Series Bedienungsanleitung

Assa Abloy

Assa Abloy Securitron CEPT-10-10 Bedienungsanleitung

Assa Abloy

Assa Abloy OneSystem 819N Installationsanleitung

Beliebte Sperren Handbücher anderer Marken

Magic

Magic 105 Bedienungsanleitung

Gantner

Gantner GAT NET.Lock 7020 System Kurzanleitung

Wittkopp

Wittkopp Insys 7202 Bedienungsanleitung

Dorma

Dorma Studio Classic Bedienungsanleitung

Securam

Securam ECSL-601 Bedienungsanleitung

Sudhaus

Sudhaus 3003 Bedienungsanleitung

Safety 1st

Safety 1st 48517 Bedienungsanleitung

Pado

Pado FDS-10 Bedienungsanleitung

Esco

Esco systeQ Series Bedienungsanleitung

COMPX

COMPX National D8951 Bedienungsanleitung

secureo

secureo Key Box Bedienungsanleitung

Stock Loks

Stock Loks C8713 Bedienungsanleitung

COMPX

COMPX 1T-058 Betriebsanleitung

Auslock

Auslock T11 Bedienungsanleitung

ELCOM

ELCOM 7205 Bedienungsanleitung

Stealth SAFES

Stealth SAFES ShadowVault Bedienungsanleitung

Knox

Knox KeySecure 5 Bedienungsanleitung

Kwikset

Kwikset 48334/01 Bedienungsanleitung