Audiovox AS-9234 Bedienungsanleitung

128-8970a

1 of 20

Page1

Model AS-9234

Owners Guide

Upgrade Vehicle Security

& Remote Start System

PATENTED: www.voxxintlcorp.com/company/patents

RevbNewFormat5/13

Table Of Contents:

Features Page 2

Options Page 2

Arming the System -Active Page 3

Arming the System - Passive (Automatic) Page 4

Protection While the System is Armed Page 4 - 5

Disarming the System Page 5

Intrusion Warning Signals Page 5 - 6

Operating the Emergency Panic Page 6

Using the Valet Switch Page 6 - 7

Manually Overriding Your System Page 7

Programming Your Custom Code Override Code Page 7 - 8

Using Custom Code Manual Override Page 8 - 11

Optional Ignition Lock / Unlock Feature Page 11

Eliminating the Arm / Disarm Chirps Page 11

To Remote Start Your Vehicle Page 12 - 13

Operating On Automatic Start Up Timer Mode Page 14 - 15

To Enter the Remote Start Safety By-Pass Mode Page 16 - 17

Owner's Notes Page 18

Programming Bank 1 Page 19

System FunctionsAt A Glance Page 20

128-8970a

2 of 20

Page2

FEATURES:

Programmable Active or Passive Arming

Selectable Manual Override Mode

Remote Panic in all modes

Protected Push Button Valet/Override Switch

SelectableAutomatic Timed Start Mode

User Programmable Manual Override Code

7 Function LED - Arm / Disarm / Zone 1 / Zone 2 / Zone 3 / Valet / Arming

Intrusion Alert with Memory

Audible Arm / Disarm / Defective Zone / Tamper Confirmation

Optional 6 Tone Siren with Instant Siren Activation All Entry Points

Starter Disable When Armed

True Last Door Arming

Defective Zone By-Pass

Active or Passive Arming Selectable

Programmable Auto Lock On / Off

Programmable Auto Unlock On/ Off

Programmable Door Lock Pulse Duration 1 Second / 3.5 Seconds/1 Sec L/ Dbl. U/L

Programmable Active or Passive Door Locks

UserProgrammablePermanent ChirpDelete

Car Horn Activation for additional alarm response

Additional Negative Trigger Input

Parking Light Flasher

Plug In Dual Stage Shock Sensor

OPTIONS :

Optional External Superheterodyne Receiver Antenna w/PushButton Switch & LED

Telematic Upgrade Ready

 Plug In Flash Logic By-Pass Capable

Remote Trunk Release (must have electronic trunk release)

Multiple Vehicle Capable

Remote Power Window Roll Up

Remote Garage Door Interface

Multiple Vehicle Capable

Congratulations on your purchase of this automotive Remote Start / Alarm

KeylessEntryUpgradeSystem.Thisstate-of-the-art systemisdesignedto

armanddisarmwhenitreceivesalockorunlockcommandfromyourexisting

FactoryKeylessEntryTransmitter.Takingafewmomentstoreadthismanual

will help to ensure that your vehicle is protected at all times.

NOTE: This system can be installed as a remote start upgrade operating

without any alarm functions. If this is the case with your vehicle's

installation, there will be no audible alert when the vehicle door,

hood, or trunk is opened while locked from the transmitter.

Also,the system has the ability to beep the vehicle's horn, sound

a siren, or both. Where a beep or chirp is mentioned, consider

either or both may sound.

128-8970a

3 of 20

Page3

NOTE: Allfunctionsofthesystemwillbecontrolledbythefactorytransmitter,

includingthestart sequence.If you findthe operatingrange to be

lessthandesired,Audiovoxoffersanoptionalonebuttontransmitter

kitwhich can beadded toincrease operatingrange for startingand

unlockingwhile runningunder controlof thetheremote start.

WARNING! Becertain thatthevehicle isoutdoorsbefore usingthisor an

remotevehicle startingdevice.Arunningengineproduces

dangerouscarbon monoxidefumeswhich canbeharmful or

fatalifprolongedexposureoccurs.DONOTremotestartthe

vehicleif itisgaraged.

NOTE: Yoursystemhastheoptionof usinga siren,the vehiclehorn, orboth

for the sounding device. Where the siren is referenced below, the

horn or both may in fact chirp, or beep.

ARMING THE SYSTEM - ACTIVE

1. Turn the ignition key off, exit the vehicle and close all doors.

2. Press and release the Lock button on the keychain transmitter.

3. Thesirenand orhornwill beeponetime, theparkinglamps willflashone

time,andtheDashMounted,LEDortheoptionalLEDfoundontheglass

mountedwindsheild receiverwillbegin toslowlyflash,indicatingthat the

system is ARMED.

Ifthesiren/hornsounds3chirps,thenyouhaveleftadoor,trunk,orhood

lidajar.Simplyclosetheopenedentrypointtoprovidefullprotection.Ifthe

siren"chirped"threetimes,sometimeafterarming,theexclusivedelayed

domelightlearncircuithasbeenprogrammedandthesystemdetecteda

openentrypointafterthelearneddelayexpired.Again,closingthehood,

trunk,ordoorswillcorrecttheproblemandyoudonotneedtodisarmthe

systemtomakethecorrection.Ifthesiren/horndidnotsoundwhenarming,

thenthe chirpshave beenturned off,and youshould referto thesection

titled“ ELIMINATINGTHE ARM/ DISARMCHIRPS “in thismanual.

4. Any time the door lock switch in the vehicle is used to lock the doors

while the ignition key is turned off, the system will immediately arm.

Tolockthedoorsafterentering thevehicle,make surethe ignitionkeyis

switchedonfirst.Turningtheignitionkeyonfirstwillstopthesystemfrom

arming.

128-8970a

4 of 20

Page4

ARMINGTHE SYSTEM-PASSIVE(AUTOMATIC)

(Mustbe activatedduringprogramming)

1. Turn the ignition key off, exit the vehicle, and close all doors.

2. TheDashMounted,LEDortheoptionalLEDfoundontheglassmounted

receiver will begin to flash rapidly, indicating that the system is

automatically(passively) arming.Asan addedconvenience, the30

second automaticpassive armingwill notbegin untilall doorsare closed,

allowingpassengersto exitthevehicleattheirconvenience.

3. In 30 seconds, you will hear a single short chip from the siren and the

vehicle’sparkinglampswillflashonetime,indicatingthat thesystemhas

ARMED.Atthistime,thedashmountedPRLEDortheoptionalLEDfound

onthewindsheildmountedreceiverwillbegintoflashslowly,providinga

visual indication that the system is fully armed.

4. It is possible to program the system, that when the alarm is allowed to

automatically passivearm,therewillbea15seconddelayafteradooris

openedbeforethealarmwillsound.However,ifthesystemisprogrammed

for instant trigger there will be no delay. Check with your installer for the

setting of this feature.

IMPORTANT! Whenthesystemisprogrammedforpassivearming,the

systemwill always arm, even when the keychain transmitter has not

been used to lock the doors.

When you leave the vehicle, and a door has been left opened, the

system will arm after 10 minutes. If you plan to vacuum the car, or if

serviceworkisbeingperformed,eitherleavethekeyintheignitionand

switchedtotheon position,orputthesystemintovaletmode.Ifyoudo

notdothis,thesystemwillarmin10minutes,andyoumayinadvertently

trip the alarm.

PROTECTIONWHILE THESYSTEM ISARMED

1. Opening any door, hood, or trunk will cause the alarm to immediately

sound. The alarm will continue to sound for 30 seconds, then stop and

automaticallyrearmthevehicle.Ifthepotentialthiefleftadooropened,the

alarmwillsoundforthreemore30secondcycles,thenre-armandignore

theopeneddoorzone.

128-8970a

5 of 20

Page5

2. Wheneverthesystemisarmed,theDashMountPRLED,ortheoptional

onwindsheildmountreceiver'sLEDindicatorwillslowlyflash.Thisserves

as a visual deterrent to the potential thief. The LED is a very low current

bulb,andwillnotcausethevehicle’sbatterytodrain,evenwhenthevehicle

isleftunattendedforextendedperiods.

3. Wheneverthesystemistriggered,thevehicle’sparkinglightswillflashfor

the30secondalarmcycle,attractingaddedvisualattentiontothevehicle.

4. Wheneverthesystemisarmed,thevehicle’sstarterwillbedisabled.The

vehicle will not start.

DISARMINGTHESYSTEM:(OnlyIfAlarmFeaturesAreSelectedOn)

1. Asyouapproachthevehicle,pressandreleasetheunlockbuttononthe

keychaintransmitter.

2. Thesirenandorhornwillbeeptwotimes,theparkinglampswillflashtwo

times,and the PRLED, or optional onglass receiver'sLED will turn off,

indicating that the system is DISARMED.

NOTE: Ifyoursystemhasbeenprogrammedfor"passivearming",then

it will begin to re-arm immediately after disarming. This is

indicated by a rapid flashing of the dash mounted PRLED, ot

the optional on glass receiver's LED. Opening one of the

vehicle’s doors will suspend the passive arming process until

all doors have been closed, or until the ignition key has been

turned on.

INTRUSIONWARNINGSIGNALS:(OnlyIfAlarmFeaturesAreSelectedOn)

Thesystemwillinformyouifanintrusionattempthasoccurredwhileyouwere

awayfrom thevehicle.If anintrusionattempt hasoccurred,the sirenand or

hornwillbeepfourtimeswhenthesystemisdisarmed.Thevehicle’sparking

lights will also flash three times to indicate an intrusion has occurred.

EnterthevehicleandobservethedashmountedLEDortheoptionalonglass

receiver'sLEDforfurtherinformation.

1. If the LED is flashing one time, pause, one time, pause, etc., then an

intrusion attempt was made to a sensor connected to zone 1.

128-8970a

6 of 20

Page6

2. If the LED is flashing two times, pause, two times, pause, etc., then

anintrusion attempt was made to the hood or trunk, or to an optional

sensor connected to zone 2.

3. If the LED is flashing three times, pause, three times, pause, etc., then

anintrusionattemptwasmadethroughoneofthevehicle’sdoors.

Theseintrusionwarningindicatorsarestoredinthesystem’smemory,andwill

only be erased when the ignition key is turned to the on position.

OPERATINGTHEEMERGENCYPANIC:

Thebuttonsonyourkeychaintransmitterwillallowyoutoimmediatelyactivate

the alarm in emergency situations. To use the remote panic switch:

1. Press the unlock, then lock, then unlock buttons on your keychain

transmitterwithin3seconds.Thealarmwillimmediatelysound,andcontinue

to sound for 30 seconds.

2. Tostopthealarmbeforethe30secondcyclehasexpired,simplypress

andrelease the unlock button on your keychain transmitter.

NOTE: Ifthefactorysystemhasapanicmode,itissuggestedthatthefactory

panicfeature beused insteadof theupgrade systemto preventany

potentialproblemofturningoffthepanicmode.

USINGTHE VALET SWITCH:

The valet switch allows you to temporarily bypass all alarm functions, elimi-

nating the need to hand your transmitter to parking attendants or garage

mechanics. When the system is in valet mode, all alarm functions are by-

passed,however theremotepanic featureand remotedoorlocks willremain

operational. To use the valet mode, the system must first be disarmed

either by using your keychain transmitter, or by overriding the system as

explainedin theManual OverrideSection ofthis manual.

TOENTERTHEVALETMODE:

1. Disarm the unit by use of the factory transmitter or by use of the manual

overridesequence.

2. Turn the ignition switch to the on position.

128-8970a

7 of 20

Page7

3. PressandholdthepushbuttonswitchfoundonthedashmountPRLED,

orontheoptionalglassmountedreceiverassemblyfor5seconds,untilthe

LEDturnson, indicatingvaletmode hasbeen successfullyentered.

TOEXITVALET:

With the ignition switch in the on position, press and release the same

pushbuttonswitch usedtoenter thevaletmode onetime. TheLEDturns off

indicating the valet mode has successfully been exited.

MANUALLYOVERRIDINGYOUR SYSTEM:

USING SIMPLE VALET SWITCH MANUAL OVERRIDE

If your factory transmitter is lost, broken, or otherwise rendered inoperable

your Security System can be disarmed without the use of the keychain

transmitter.This isnecessary,since youwillneed theability tooperate your

vehicle if the transmitter is lost or its battery fails. If your system has been

selected for Valet Switch manual override as indicated on the last page of

this manual, to override the alarm system;

1.Openthe vehicledoor.The alarmwill sound.

2.Turn the ignition key to the on position.

3.Within 5 seconds, press and hold the valet pushbutton switch found the

dashmount PRLED,or ontheoptionalglassmounted receiver.

The alarm system will stop sounding and enter the (bypassed) mode.

Youcannow startand operate thevehicle normally.

Typically this override mode is used only if the transmitter has become

inoperative.

PROGRAMMINGYOURCUSTOMCODE OVERRIDE CODE:

Unlike override switches easily found, and defeated, this system allows

the consumer toprogram apersonaloverride code,offeringa higherlevelof

security. The system comes from the factory with a pre-programmed over-

ridecode of11.To changethis defaultoverride code,do thefollowing:

128-8970a

8 of 20

Page8

1. Disarm the system by use of the transmitter, or by use of the emergency

overridesequence. Turntheignition switchto theon position.

2. Within 10 seconds, press and release PRLED, or the optional

push-buttonswitchfoundontheglassmountedreceiverassembly3times.

3. Within 10 seconds turn the ignition switch off, on, off, on, off, on.

(The siren or horn will beep and the lights will flash one time.)

4. Within 10 seconds, begin to enter your chosen 10ths digit by

pressing and releasing thePRLED, orthe optionalpush-button

switch found on the glass mounted receiver assembly from 1 up to 9

times.

5. Within10secondsof thelastentered10thsdigit, turntheignitionswitchoff

thenon.

6. Within 10 seconds, begin to enter your chosen units digit by

pressing and releasing thePRLED, orthe optionalpush-button switch

found on the glass mounted receiver assembly from 1 up to 9 times.

7. Finish by turning the ignition switch to the off position.

If the new code was accepted, the unit will report back the newly entered

code,by flashing theLED, firstindicating the10ths digit,pause and thenthe

units digit. The unit will report the new code three times with a one second

pause between each code, then the system will begin arming. If the LED

flash pattern reports the previously stored code, the new code was not

entered correctly. Please repeat steps 1 through 7 above considering the

following.

NOTE: Acceptable digits 10ths or units are 1 through 9. The unit will not

recognizea 0(Zero),or nodigit enteredin anyplace, unitsor tenths.

NOTE: If 15 seconds of inactivity expire, or if the ignition switch is turned off

for more then 5 seconds during any of the above steps, the unit will

revert back to the last successfully stored code.

USINGCUSTOM CODE MANUALOVERRIDE:

If your factory transmitter is lost, broken, or otherwise rendered inoperable,

128-8970a

9 of 20

Page9

yoursystem canbeoverriddenallowingoperationof thevehicle.Themanual

overridecodeispre-programmedatthefactoryto11.Thiscodecanbechanged

by the operator to a more familiar two digit number. Once you’ve become

familiarwith thesystem’soperation andoverride procedure,wesuggest you

changethe codeforadded security.

NOTE: The override procedure below describesuse, assuming that the

factory preset code has not been changed and is still set to the

factorydefault11.The dash mount PRLED, or the optional on glass

receiver'sLEDvalet/overridepush button switch is used to enter

the tenths and units digits, pressing and releasing this button

onetimefor eachdigit required.

Ifyour systemhas beenselectedfor CustomCode manualoverride asindi-

cated on the last page of this manual, to bypass the alarm system; with a

code of 11, follow the sequence listed below:

1. TheLEDis flashingindicatingtheunitisarmed,enter thevehicle,thesiren

will sound, turn the ignition switch to the “on” position.

2. Within 10 seconds begin to enter tenths digit of override code.

(Inthis ex-amplethe codeis 11, sopress andrelease thedash mounted

PRLED,or the optionalpush-button switchfound onthe glassmounted

receiverassembly onetime).

3. Within 10 seconds of entering the last tenths digit, turn ignition “off then

on”.

4. Within 10 seconds of turning the ignition switch on, begin to enterunits

digit of override code. (In this example the code is 11, so press and

release the dashmounted PRLED,orthe optionalpush-button switch

foundon theglass mounted receiver assembly onetime).

5. Within 5 seconds after the last units digit is entered, turn the ignition

switch off, then on, and start your vehicle.

Ifthe manualoverridecode isentered properly,theunit stopssounding,the

LEDturns off,indicating asuccessful override.The systemis nowdisarmed

andyou canstartand operateyour vehicle.Theunit willallowthree attempts

to disarm via the manual override sequence. If the code is not successfully

enteredwithin thethreeattempts, disarmingwith themanualoverride switch

will be locked for 10 minutes.

128-8970a

10 of 20

Page10

In many cases, to increase the security of your system, you may elect to

changethe manualoverride codeto anumber thatis morefamiliartoyou,or

simplyto havea differentcode thanwas pre-assignedfrom thefactory.

To changethe pre-assignedoverridecodefollowthe stepsoutlinedbelow.

Itisadvised youreadboth sectionsunderthe headings“Programming Your

CustomOverride Code”and,“CustomCodeProgramming Example”,tocom-

pletelyunderstandthe procedurebefore youbegin:

CUSTOMCODEOVERRIDEEXAMPLE:

Tochange the codefrom thefactory pre-assignedcodeof 11 to“52” you

woulddo thefollowing:

1. Disarmthe system byuse ofthe transmitter, orby useofthe emergency

overridesequence.

2. Turn the ignition switch to the on position.

3. Within 10 seconds, press and release the PRLED, or the optional

push-buttonswitchfoundontheglass mountedreceiverassembly3times.

4. Within 10 seconds turn the ignition switch off, on, off, on, off, on.

(The siren or horn will beep and the lights will flash one time.)

5. Within 10 seconds, begin to press and release the PRLED, or the

optionalpush-button switch foundon theglass mountedreceiver

assembly to set the tenths digit.

(As per the example, press 5 times to set the tenths digit to 5)

6. Within 10 seconds of the last press of the push-button, turn the ignition

` switch off then on.

7. Within 10 seconds, begin to press and release the PRLED, or the

optionalpush-button switchfound onthe glassmounted receiver

assembly to set the units digit.

(As per the example, press 2 times to set the units digit to 2).

8. Turn the ignition switch totheoffposition. Immediately observe the

LED flashpattern.

Andere Handbücher für AS-9234

Inhaltsverzeichnis

Andere Audiovox Autoalarmanlage Handbücher

Audiovox

Audiovox Keyless Entry Alarm Upgrade Module APS-30 Bedienungsanleitung

Audiovox

Audiovox Prestige APS99BT3 Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum APS-995C Bedienungsanleitung

Audiovox

Audiovox ca 6552 Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum APS-400 Bedienungsanleitung

Audiovox

Audiovox APS996A - Prestige Remote Security System Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum APS-150-A Bedienungsanleitung

Audiovox

Audiovox PRO-9342FT3WOS2 Bedienungsanleitung

Audiovox

Audiovox PRO 9644 Bedienungsanleitung

Audiovox

Audiovox Pursuit PRO-9056 Bedienungsanleitung

Audiovox

Audiovox UTX-ETX Betriebsanleitung

Audiovox

Audiovox Prestige APS-101 Bedienungsanleitung

Audiovox

Audiovox APS-95BT2 Betriebsanleitung

Audiovox

Audiovox Pursuit Pro 9544FT3 Bedienungsanleitung

Audiovox

Audiovox Pursuit PRO 2000S Anleitung zur Verwendung

Audiovox

Audiovox Platinum+ APS 687C Bedienungsanleitung

Audiovox

Audiovox SECURIKEY+ Betriebsanleitung

Audiovox

Audiovox Protodyne PRO-300A Bedienungsanleitung

Audiovox

Audiovox Prestige APS-15R Bedienungsanleitung

Audiovox

Audiovox AS-9495-4P Bedienungsanleitung

Audiovox

Audiovox APD-510 Bedienungsanleitung

Audiovox

Audiovox Pursuit PRO 9644a Bedienungsanleitung

Audiovox

Audiovox APS-787C Bedienungsanleitung

Audiovox

Audiovox Pursuit PRO 9845B Bedienungsanleitung

Beliebte Autoalarmanlage Handbücher anderer Marken

Clifford

Clifford 3606X Bedienungsanleitung

Ultra Start

Ultra Start 2500M SERIES Bedienungsanleitung

Ultra Start

Ultra Start 650 Series Bedienungsanleitung

Sparkrite

Sparkrite SRA8 Bedienungsanleitung

Viper

Viper 4708V Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Handbuch

Falcon

Falcon Predator XL3 Benutzerhandbuch

Clifford

Clifford Sabre II Bedienungsanleitung

CrimeStopper

CrimeStopper CS-8717 Kurzanleitung

Ultra Start

Ultra Start 450 SERIES Bedienungsanleitung

Scytek electronic

Scytek electronic Vectra X3 Bedienungsanleitung

Excalibur

Excalibur AL-1860-EDPB Bedienungsanleitung

Clifford

Clifford CYBER 2 Bedienungsanleitung

Gemini

Gemini 7057 Bedienungsanleitung

FlashLogic

FlashLogic FLRSBA PRESTIGE Bedienungsanleitung

Magicar

Magicar FAI-440 Bedienungsanleitung

Clifford

Clifford Nova 3 Bedienungsanleitung

Viper

Viper 560XV Bedienungsanleitung