Avaya INTUITY AUDIX LX Bedienungsanleitung

This printable guide contains copies of the following topics:

Home > Getting Started > Installation > Installation Printable Guide for the INTUITY AUDIX LX

Installation Printable Guide for the INTUITY AUDIX LX

Topic Page Number

Installation Prerequisites 3

Connecting Peripheral Devices (monitor, keyboard, modem) 9

Connecting the Analog-line Interface Cards (voice cards) 11

Restoring Power to an INTUITY System 12

Checking the Voice System, Modem, and Network Addressing 13

Install Additional Language Software (if needed) 17

Install Switch Integration Software 19

Administering Switch Integration 22

Initial System Administration 24

System Acceptance Test 41

Page 1of 42Installation Printable Guide for the INTUITY AUDIX LX

3/20/2002Avaya_INTUITY_AUDIX_LX\installprint.pdf

Page 2of 42Installation Printable Guide for the INTUITY AUDIX LX

3/20/2002file://C:\Avaya_INTUITY_AUDIX_LX\installprint.htm

Installation Prerequisites

This topic covers the following items:

lIntended audience

lSafety and security alert labels

lGeneral precautions

lFCC statement

lDOC interference information

lSite preparation

¡Environmental considerations

¡Installation area considerations

¡Weight and space considerations

¡Power requirements

lShipment Contents

lSaving Packing Materials

Intended audience

This book is intended primarily for the on-site technical personnel who are responsible

for installing the system and performing initial administration and acceptance

testing. However, the General precautions are intended for both installers and system

administrators.

Safety and security alert labels

This book uses the following symbols to call your attention to potential problems that

could cause personal injury, damage to equipment, loss of data, service interruptions

or breaches of toll fraud security.

CAUTION: indicates the presence of a hazard that if not avoided can or will cause

minor personal injury or property damage, including loss of data.

WARNING: indicates the presence of a hazard that if not avoided can cause death or

severe peronal injury.

DANGER: indicates the presence of a hazard that if not avoided will cause death or

severe personal injury.

Page 3of 42Installation Printable Guide for the INTUITY AUDIX LX

3/20/2002file://C:\Avaya_INTUITY_AUDIX_LX\installprint.htm

General precautions

ATTENTION: Il y a danger d’explosion s’il y a remplacement incorrect de la batterie.

Remplacer uniquement avec une batterie du même type ou d’un type équivalent

recommandé par le constructeur. Mettre au rebut les batteries usagées conformément

aux instructions du fabricant.

FCC statement

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC rules. These limits are designed to

provide a reasonable protection against harmful interference when th e equipment is

operated in a commercial environment. This equipment generates, uses and can

radiate radio-frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference

in which case the user will be required to correct the interference at his/her own

expense.

DOC interference information

This digital apparatus does not exceed the Class A limits for radio noise emissions set

out in the radio interference regulations of the Canadian Department of

Communications.

Le présent appareil nomérique n’émet pas de bruits radioélectriques dépassant les

limites applicables aux appareils numériques de la Class A préscrites dans le reglement

sur le brouillage radioélectrique édicté par le ministère des Communications du

Canada.

NOTE

: The following applies for INTUITY LX1000 installations in Sweden, Finland and

Norway only.

The INTUITY LX1000 relies on a ground connection through the main plug with an

earth contact. Because of unreliable earthing concerns in Sweden, Finland and

Norway, the INTUITY LX1000 must be installed by Service Personnel in a restricted

access location. A restricted access location is defined as access that can be gained

by only Service Personnel or Customers who have been instructed about the reasons

for the restricted access and any safety precautions that must be taken. In these

cases, access to the INTUITY LX1000 is gained by the use of a tool (such as a lock

and key) or other means of security.

Lithium battery(ies) included with this system. Do not puncture, mutilate, or

dispose of battery(ies) in fire. Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by manufacturer.

Dispose of used batteries in accordance with the manufacturer's instructions and

your local regulations.

Page 4of 42Installation Printable Guide for the INTUITY AUDIX LX

3/20/2002file://C:\Avaya_INTUITY_AUDIX_LX\installprint.htm

Site preparation

This section describes physical requirements for the installation site, which include:

lEnvironmental considerations

lInstallation area considerations

lWeight and space considerations

lPower requirements

Environmental considerations

Place the INTUITY LX1000 in an area where the environmental conditions shown in the

following table are maintained.

Installation area considerations

Operating State Temperature Humidity

Operating +10 to +35ºC

(+50 to +95ºF)

20 to 80%,

noncondensing

Non-operating (in

storage or being

shipped)

-20 to +60ºC

(-4 to+140ºF)

20 to 80%,

noncondensing

Observe the following when determining where to place the INTUITY LX1000:

lUse only the power cord assembly provided to connect the INTUITY LX1000

to an AC mains outlet.

lInstall the INTUITY LX1000 within 6 feet (2m) of a grounded AC mains

outlet.

lDo not use extension cords with the INTUITY LX1000.

lEnsure that the AC main outlet to be used to power the INTUITY LX1000 (via

the power cord) is a grounded outlet. If you are unsure of the ground

integrity of the outlet, have a trained and certified electrician check the

outlet.

lConsideration must be given to the connection of the INTUITY LX1000 to a

branch circuit with respect to overload or overcurrent protection. Check the

INTUITY LX1000 ratings to ensure that, together with other equipment

connected to the same branch circuit, that an overcurrent or overload

condition does not exist.

lMaintain an air-distribution system that provides adequately cooled, filtered

and humidity-controlled air.

lDo not install the INTUITY LX1000 such that the ventilation or fan openings

will be blocked

Page 5of 42Installation Printable Guide for the INTUITY AUDIX LX

3/20/2002file://C:\Avaya_INTUITY_AUDIX_LX\installprint.htm

Weight and space considerations

The following table lists the approximate weight, size, and depth of each system.

The following table lists the approximate weight, size, height, and depth for the

monitor, keyboard, and printer.

NOTE: The following applies for INTUITY LX1000 installations in Sweden, Finland,

and Norway only.

The INTUITY LX1000 relies on a ground connection through the main plug with an

earth contact. Because of unreliable earthing concerns in Sweden, Finland and

Norway, the INTUITY LX1000 must be installed by Service Personnel in a restricted

access location. A restricted access location is defined as access that can be gained by

only Service Personnel or Customers who have been instructed about the reasons for

the restricted access and any safety precautions that must be taken. In these cases,

access to the INTUITY LX1000 is gained by the use of a tool (such as a lock and key)

or other means of security.

Table: System Weight and Space Considerations

Weight Height Width Depth

29 lb

(13 kg) 19 in.

(49 cm) 9 in.

(23 cm) with stabilizing feet 18 in.

(46 cm)

Add 3 inches (7.6 cm) to accommodate a rear chassis cable support bracket. If

required, add 4 inches (10.2 cm) to accommodate 356B adapter and mounting clip.

Table: Peripheral Weight and Space Considerations

Peripheral Weight Height Width Depth

Monitor 27 lb

(12.2 kg) 14 in.

(35 cm) 14 in.

(36 cm) 15.4 in.

(39 cm)

Keyboard 5 lb

(2.3 kg) 2.5 in.

(6.4 cm) 19 in.

(48 cm) 8 in.

(20.5 cm)

A monitor is not necessarily ordered and shipped for each system. The weight and

space considerations listed are for those shipments that include a Sampo 15-inch

monitor.

Page 6of 42Installation Printable Guide for the INTUITY AUDIX LX

3/20/2002file://C:\Avaya_INTUITY_AUDIX_LX\installprint.htm

Power Requirements

The following table lists the power requirements for the system.

In addition to the above power requirements, you must also:

lLocate each unit within 6 feet (2 meters) of its power receptacle.

lKeep the communication cables separate from the power cables.

lInstall communication and power cables in accordance with National Electrical

Codes (NEC).

Shipment Contents

The customer should have received boxes containing the computer, keyboard, and

monitor (if ordered).

Be sure that you have the following items packed in the box or boxes:

lThe Intuity LX chassis. Turn out the stablizing feet on the bottom of the

computer case.

lOne 6-foot to 8-foot (2-meter to 3-meter) power cord (depending on country in

which you are doing the installation)

lThe Intuity LX keyboard with on-board mouse and split connector cord

lOne 4-pin RJ11 cable for each voice port purchased

lOne LAN cable

lOne monitor and power cord, if ordered

lOne Maintenance Modem, and required cables

Attribute Requirement

Volts AC (VAC) 100–220

Hertz (Hz) 60

Phase Single

Amps

(US) 5A (maximum)

AMPS

(International) —

Input cords NEMA 5–15P plug; 6 ft (2 m) long

Unit input receptacles IEC320 inlet

Maximum Power Output 200 W

Heat Dissipation 682 BTU

Use only shielded cables and equipment in conjunction with the system to

maintain safe levels of electromagnetic compatibility.

Page 7of 42Installation Printable Guide for the INTUITY AUDIX LX

3/20/2002file://C:\Avaya_INTUITY_AUDIX_LX\installprint.htm

Saving Packing Materials

Save the shipping carton and all packing materials to use in case you have to return

the system to the manufacturer. If you ordered multiple systems, saving one carton

and one set of packing materials should be sufficient. Packing materials include:

lAntistatic bags

lCardboard and foam inlays

Also save the shipping cartons for the keyboard and monitor.

Note: The packing materials also may include a plastic bag designed to

protect the system from moisture during shipment. Discard this bag. It is not

reusable.

Page 8of 42Installation Printable Guide for the INTUITY AUDIX LX

3/20/2002file://C:\Avaya_INTUITY_AUDIX_LX\installprint.htm

Connecting Peripheral Devices (monitor, keyboard, modem)

This section describes how to make the connections between the system and the

following peripheral devices:

lMonitor

lKeyboard and mouse

lModem

Connecting the Monitor

A monitor is available for purchase for use with the INTUITY AUDIX LX system or the

customer can supply a monitor.

Two cables connect the monitor to the system:

lVideo cable connector: The video cable connector has a video input connector at

one end. The other end of the cable is permanently attached to the monitor.

lPower cable: The power cable for the monitor connects to a standard AC outlet.

To connect the monitor cables:

1. Plug the video cable connector from the monitor directly into the video

connector located on the back of the chassis.

2. Tighten the thumbscrews on the video cable connector with your fingers or with

a small flatblade screwdriver.

3. Plug the female end of the power cable into the monitor.

4. Plug the male end of the power cable into a grounded AC outlet.

5. Log in as craft or sa, and verify that it displays system information well enough

to do initial administration.

If the Sampo Alphascan 511 monitor isn't purchased with the system, any 15" or

greater monitor can be connected and will function properly,though some additional

configuration steps may be necessary. If the display is poor, perform the following

process after powering up:

1. Log off of the console. If the display is so poor that you cannot see the mouse

pointer well enough to exit or log off, you can exit by pressing

CTRL+ALT+BACKSPACE simultaneously.

2. Log in at the console as monitor with the password of monitor.

3. On the text-based display, attempt to find the brand name of the monitor to be

used. Use the down arrow or PageDown keys to scroll through the list of many

available monitors, or try typing the first letter of the brand name.

4. Use the TAB key to move between the menu and the buttons, if necessary.

5. Highlight the name of the monitor that most closely matches the customer's

monitor, then press ENTER.

The monitor screen flashes during testing and adjusting, then the cursor returns

to the login prompt.

6. Log in to the system with craft or sa, as appropriate, and see if the display has

improved.

7. If the display is still poor, relogin as monitor and select the Generic monitor

Page 9of 42Installation Printable Guide for the INTUITY AUDIX LX

3/20/2002file://C:\Avaya_INTUITY_AUDIX_LX\installprint.htm

setting, which is the first one on the list.

8. If there is still no improvement, the customer must supply a different monitor.

Connecting the Keyboard and Mouse

A 6-pin female DIN receptacle is located in the back of the system. The receptacle is

purple. The male plug is provided with the keyboard. Both of the connector assemblies

are keyed to provide proper alignment.

The mouse provided with the INTUITY AUDIX LX system is onboard the keyboard. The

connector for the provided mouse splits off from the keyboard cable. A female DIN

receptacle is located in the back of the system, next to the keyboard receptacle. The

mouse receptacle is green.

If the customer chooses, the customer can provide a standard mouse and plug the

mouse cable into the mouse receptacle.

Connecting the Modem

A serial modem is provided with INTUITY AUDIX LX for remote maintenance. Complete

the following procedure to connect the serial modem to the INTUITY AUDIX LX system.

After you connect the modem, you must install the modem in the INTUITY AUDIX LX

web-based interface.

Note: A USB modem is also available for purchase with the system. If you are using a

USB modem or a customer-supplied serial modem, follow the manufacturer's

instructions to connect the modem to the system. Then use the Install

Modem/Software page to install the INTUITY AUDIX LX modem software.

To connect the supplied serial modem:

1. Verify that dip switches 3, 5, and 8 are in the down position (this should be the

default).

2. Connect the 25-pin end of the provided 25-pin to 9-pin cable to the modem. A

25-pin extension cable is also provided for use if needed.

3. Connect the 9-pin end of the 25-pin to 9-pin cable to COM2 on the back of the

INTUITY AUDIX LX system.

4. Plug one end of an analog phone cord into the TELCO jack on the modem.

5. Plug the other end of the analog phone cord into an analog telephone jack.

6. Plug the modem's power supply into the modem's power jack and into an

electrical outlet.

7. Turn on the modem's power and then verify that the CS light on the front panel

of the modem is lit.

Once the modem is connected, you must install it in the INTUITY AUDIX LX

system software. Activate the Modem instructs you to do that after you log in to

the system for the first time.

Page 10 of 42Installation Printable Guide for the INTUITY AUDIX LX

3/20/2002file://C:\Avaya_INTUITY_AUDIX_LX\installprint.htm

Andere Handbücher für INTUITY AUDIX LX

Inhaltsverzeichnis

Andere Avaya Server Handbücher

Avaya

Avaya HMS 400 Bedienungsanleitung

Avaya

Avaya CallPilot 600r Handbuch

Avaya

Avaya S8700-Series Bedienungsanleitung

Avaya

Avaya S8700 Series Bedienungsanleitung

Avaya

Avaya CS 1000E Handbuch

Avaya

Avaya S8 Series Bedienungsanleitung

Avaya

Avaya Definity G3 / ProLogix Kurzanleitung

Avaya

Avaya Definity Enterprise Communications Server Bedienungsanleitung

Avaya

Avaya S8500 Series Bedienungsanleitung

Avaya

Avaya S8700 Series Bedienungsanleitung

Avaya

Avaya CallPilot 201i Einrichtungshandbuch

Avaya

Avaya S8500 Series Bedienungsanleitung

Avaya

Avaya Polycom SpectraLink 8400 Series s Bedienungsanleitung

Avaya

Avaya S8400 Bedienungsanleitung

Avaya

Avaya 1000 Series Bedienungsanleitung

Avaya

Avaya Communication Server 1000M Single Group Bedienungsanleitung

Avaya

Avaya S8300 Series Bedienungsanleitung

Avaya

Avaya S8500 Series Bedienungsanleitung

Avaya

Avaya 1000E Beilage

Avaya

Avaya S8510 Bedienungsanleitung

Avaya

Avaya CallPilot 202i Bedienungsanleitung

Avaya

Avaya Scopia Bedienungsanleitung

Avaya

Avaya S8400 Bedienungsanleitung

Avaya

Avaya S8730 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung