Avaya Scopia Bedienungsanleitung

Installation Guide for Avaya Scopia®

Application Server

Version 2

For Solution 8.x

March 2014

this publication are owned by Avaya Inc. and are

protected by United States copyright laws, other

applicable copyright laws and international treaty

provisions. Avaya Inc. retains all rights not expressly

granted.

All product and company names herein may be

trademarks of their registered owners.

This publication is AVAYA Confidential & Proprietary.

Use pursuant to your signed agreement or Avaya policy.

No part of this publication may be reproduced in any

form whatsoever or used to make any derivative work

without prior written approval by Avaya Inc.

No representation of warranties for fitness for any

purpose other than what is specifically mentioned in this

guide is made either by Avaya Inc. or its agents.

Avaya Inc. reserves the right to revise this publication

and make changes without obligation to notify any

person of such revisions or changes. Avaya Inc may

make improvements or changes in the product(s) and/or

the program(s) described in this documentation at any

time.

If there is any software on removable media described in

this publication, it is furnished under a license agreement

included with the product as a separate document. If you

are unable to locate a copy, please contact Avaya Inc

and a copy will be provided to you.

Unless otherwise indicated, Avaya registered trademarks

are registered in the United States and other territories.

All registered trademarks recognized.

For further information contact Avaya or your local

distributor or reseller.

Installation Guide for Avaya Scopia®Application Server

Version 2, March 20, 2014

http://support.avaya.com

Installation Guide for Avaya Scopia®Application Server Version 2 Notices | 2

Table of Contents

Chapter 1: About the Avaya Scopia®Application server

Technical Specifications and Environmental Requirements ............................................................................4

Supported Capacity ..........................................................................................................................................5

Chapter 2: Preparing the Avaya Scopia®Application server Setup

Checking Site Suitability ...................................................................................................................................6

Unpacking the Device .......................................................................................................................................6

Inspecting for Damage ......................................................................................................................................7

Chapter 3: Setting up the Device

Mounting the Device on to the Rack ................................................................................................................ 9

Preparing the Rack and Rails for Mounting the Device ....................................................................... 9

Mounting the Outer Rails on to the Rack ........................................................................................... 11

Mounting the Device on to the Outer Rails .........................................................................................15

Connecting Cables to the Device ...................................................................................................................19

Configuring the IP Address for the Avaya Scopia®Application server ..........................................................20

Verifying the Server Installation ......................................................................................................................20

Installation Guide for Avaya Scopia®Application Server Version 2 Table of Contents | 3

Chapter 1 | About the Avaya Scopia®

Application server

Avaya Scopia®Application server is a state of the art modern server optimized to run the Scopia®Solution software

products: Scopia®Management, Scopia®Desktop server, Content Center for Scopia®Desktop and Avaya Scopia®

ECS Gatekeeper.

Avaya Scopia®Application server is a 1U device incorporating the latest Intel technology. It comes installed with

Windows 2012 R2 Server operating system, and its hardware supports the full capacity range of the applications it is

designed to run. It is also highly reliable, using a solid state drive (SSD), and has the ideal specifications to run

Scopia®Solution components.

This publication covers the latest Avaya Scopia®Application server (P/N 55876-00003).

Navigation

•Technical Specifications and Environmental Requirements on page 4

•Supported Capacity on page 5

Technical Specifications and Environmental Requirements

This section details the system specifications of the Avaya Scopia®Application server. Refer to this data

when preparing system setup and afterwards to verify the environment still complies with these

requirements.

The Avaya Scopia®Application server specifications are as follows:

•CPU: Single Intel Xeon E3-1275V2 Quad Core, 3.5 GHz CPU

•RAM: 8GB DDR3-1600MHz

•SSD: 100GB

•Ethernet: Dual 1GB NICs

1 x DB9 serial port connector

2 x USB 2.0 connectors

•OS: Windows Server 2012 R2 Server

The hardware and environmental requirements are as follows:

•System power requirements: 100-240 VAC, 50/60 Hz

•Maximum power consumption: 200W (682 BTU/h)

•Operating temperature: 10°C to 35°C (50°F to 95°F)

•Relative humidity: 5% to 90% non-condensing

•Storage temperature: -40°C to 70°C (-40°F to 158°F), ambient

•Physical dimensions: Height: 43mm (1.7"), width: 437mm (17.2"); depth 664mm (26.1")

•Net weight: Approx 11kg (24.25lbs)

Installation Guide for Avaya Scopia®Application Server Version 2 About the Avaya Scopia®Application server | 4

•Gross weight (with packaging): 17kg (37.5lbs)

•Rack mounting: 19-inch rack-mountable with flanges

•Acoustics: Low noise fan speed control

Supported Capacity

You can configure the Avaya Scopia®Application server in one of several configurations, where each

represents a possible set of software installations on a single server. A standalone installation has far

more capacity than a joint configuration.

For more information on installing each of the components, see the installation guide for that product.

•Standalone Avaya Scopia®Management configuration

This software installation applies to both Scopia®Management enterprise or service provider

(multi-tenant) editions, in configurations with or without the internal Avaya Scopia®Gatekeeper.

The supported capacity on this device is as follows:

–Up to 40,000 users listed in the user directory

–Up to 2,000 simultaneous MCU connections

–Up to 2,000 simultaneous gatekeeper connections

–Up to 10,000 simultaneous gatekeeper registrations

•Standalone Avaya Scopia®ECS Gatekeeper configuration

This software installation applies to both regular and alternate ECS installations. The supported

capacity on this device is as follows:

–Up to 2,000 connections to the gatekeeper

–Up to 10,000 registrations to the gatekeeper

•Standalone Scopia®Desktop server configuration

When installing only Scopia®Desktop server on this device, it can support any one of the following

Scopia®Desktop server configurations:

–Dedicated Scopia®Desktop Conference Server for up to 250 participants

–Dedicated Scopia®Desktop Content Center Server for up to 600 streaming sessions and 10

recording sessions

–Dedicated Scopia®Content Slider Server for up to 100 slider sessions.

•All-in-one configuration

This server installation combines Scopia®Management with its internal Avaya Scopia®

Gatekeeper and Scopia®Desktop server. The supported capacity on this device is as follows:

–Up to 20,000 users listed in the user directory

–Up to 200 simultaneous gatekeeper connections

–Up to 1,000 simultaneous gatekeeper registrations

–Up to 100 simultaneous Scopia®Desktop or Scopia®Mobile calls

Installation Guide for Avaya Scopia®Application Server Version 2 About the Avaya Scopia®Application server | 5

Chapter 2 | Preparing the Avaya Scopia®

Application server Setup

Perform procedures in this section to prepare the site and device for installation.

Navigation

•Checking Site Suitability on page 6

•Unpacking the Device on page 6

•Inspecting for Damage on page 7

Checking Site Suitability

Prior to setting up your device, you need to verify your site suitability for:

•System power requirements

•System environmental requirements

•The device physical dimensions.

For more information, see Technical Specifications and Environmental Requirements on page 4to learn

about these requirements. Ensure the site conforms to the listed requirements.

Unpacking the Device

About this task

We strongly recommend that you follow safety guidelines described in this section during unpacking.

Procedure

1. Inspect the shipping box to verify that it is not seriously damaged during shipping.

2. Place the shipping box on a horizontal surface paying attention to the This Side Up symbol

on the shipping box (Figure 1: This Side Up symbol on page 7).

Installation Guide for Avaya Scopia®Application Server Version 2 Preparing the Avaya Scopia®Application server Setup | 6

Figure 1: This Side Up symbol

Caution:

The accessories kit is situated on top of the device inside the shipping box and can be

damaged if the box is placed upside down. Pay attention to the This Side Up symbol on

the shipping box to handle the box correctly at all times.

Caution:

To prevent injury and equipment damage, follow the lifting guidelines described in the

Safety Guide when lifting or moving the shipping box.

3. Cut the plastic straps.

Caution:

The plastic straps are tightly stretched and can hit you when you cut them. To avoid this,

make sure you do not face the side of the box secured by the straps before you cut the

straps.

4. Cut the strapping tape.

5. Open the shipping box.

6. Take the accessories kit out of the shipping box.

7. Take the device out of the shipping box.

8. Carefully open the additional boxes, remove the packing material, and remove the drives and

other contents.

Important:

We recommend keeping the packaging materials in case you need to repack the device.

9. Remove the cellophane wrapping from the server case.

10. After opening the shipping box, check the shipment is complete. Compare the contents of the

shipment with the packing list included in the box.

Inspecting for Damage

After you verify that all of the equipment is included, carefully examine the power supplies and cables for

any damage resulting from shipping. If you suspect any damage from shipping, contact your local freight

carrier for procedures on damage claims. If you observe any physical defects in the items you ordered,

contact Technical Support for Return Material Authorization (RMA) form.

Installation Guide for Avaya Scopia®Application Server Version 2 Preparing the Avaya Scopia®Application server Setup | 7

Important:

Before proceeding with the installation, verify that all of the ordered parts are present and in good

condition. Keep a record of the parts and serial numbers. If any parts are missing or damaged, contact

your sales representative.

Installation Guide for Avaya Scopia®Application Server Version 2 Preparing the Avaya Scopia®Application server Setup | 8

Chapter 3 | Setting up the Device

These sections describe how to set up the device:

Navigation

•Mounting the Device on to the Rack on page 9

•Connecting Cables to the Device on page 19

•Configuring the IP Address for the Avaya Scopia®Application server on page 20

•Verifying the Server Installation on page 20

Mounting the Device on to the Rack

To mount the device, perform these tasks in the order listed:

Navigation

•Preparing the Rack and Rails for Mounting the Device on page 9

•Mounting the Outer Rails on to the Rack on page 11

•Mounting the Device on to the Outer Rails on page 15

Preparing the Rack and Rails for Mounting the Device

About this task

This section describes how to prepare all the equipment required to mount the device onto the rack,

including choosing the rack and finding the right place on the rack to mount the device.

Before you begin

Ensure that the room is suitable for the device and remove the device from its box, as described in

Preparing the Avaya Scopia®Application server Setup on page 6.

Procedure

1. Verify that you have a 19” rack that meets the EIA-310 standards. This standard includes the

exact specifications, including the shape of the holes, their size, the depth of the rack and

other features.

The rack should be sturdy enough to support the device when you slide it in and out.

Installation Guide for Avaya Scopia®Application Server Version 2 Setting up the Device | 9

We recommend choosing a rack without doors. If installing in an enclosed rack, ensure that

the rack has adequate ventilation.

2. Ensure that the environment is suitable and set up the rack, considering factors such as the

ambient temperature of the room. Read the safety instructions that came with your rack for

details.

Important:

Maintain a minimum clearance of 30 inches (76.2 cm) in the rear of the rack to allow

adequate airflow.

Ensure the rack is stable. The leveling jacks at the bottom of the rack should be fully

extended.

3. Decide where on the rack to place the device, using the guidelines listed below. Mark this

location on the rack, ensuring that the height is the same on each rack post.

Proper placement prevents the device from overheating and ensures that the rack is stable.

•Find a space on the rack which is 3 empty square holes in height (1U), as shown in

Figure 2: One rack unit of space on the rack on page 10.

Note that the holes on the rack posts are not spaced equally. They form a repeating

pattern of two holes close together, then one hole separate, then two holes close

together and so on.

The top of the device should start on the lower of the two holes which are close

together.

Figure 2: One rack unit of space on the rack

•If there are few devices mounted in the rack, find the lowest possible location to mount

the device, to ensure the rack remains stable.

4. Make sure you have the following items, which were shipped with the device and are used to

mount the rails to the rack (Figure 3: Preparing the parts required to mount the rails on page

11):•Two long outer rails and two short outer rails, to be attached to the rack itself (as

described in Mounting the Outer Rails on to the Rack on page 11)

Installation Guide for Avaya Scopia®Application Server Version 2 Setting up the Device | 10

Andere Handbücher für Scopia

Inhaltsverzeichnis

Andere Avaya Server Handbücher

Avaya

Avaya AG250 Handbuch

Avaya

Avaya DEFINITY SERIES Bedienungsanleitung

Avaya

Avaya CS700 Bedienungsanleitung

Avaya

Avaya 1000 Series Service-Handbuch

Avaya

Avaya S8730 Bedienungsanleitung

Avaya

Avaya Meridian 1 Series Kurzanleitung

Avaya

Avaya Scopia Bedienungsanleitung

Avaya

Avaya 1000 Series Leitfaden

Avaya

Avaya S8500 Series Bedienungsanleitung

Avaya

Avaya DEFINITY Server R Bedienungsanleitung

Avaya

Avaya CallPilot 600r Einrichtungshandbuch

Avaya

Avaya Aura 5300 Bedienungsanleitung

Avaya

Avaya S8100 Series Bedienungsanleitung

Avaya

Avaya S8500 Series Bedienungsanleitung

Avaya

Avaya S6200 Bedienungsanleitung

Avaya

Avaya S8700 Series Bedienungsanleitung

Avaya

Avaya CS7000 Service-Handbuch

Avaya

Avaya S8 Series Bedienungsanleitung

Avaya

Avaya 9012FC IO Bedienungsanleitung

Avaya

Avaya S8500 Series Bedienungsanleitung

Avaya

Avaya S8300 Series Bedienungsanleitung

Avaya

Avaya S8700 Series Bedienungsanleitung

Avaya

Avaya Communication Server 1000M Single Group Bedienungsanleitung

Avaya

Avaya S8700 Series Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung