Avenview FO-DP-300-EMI Bedienungsanleitung

www.avenview.com

DisplayPort Extender over Single

SC Fiber Optic Cable

Model #: FO-DP-300-EMI

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties

with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product

descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this

publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express

or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or

infringement of any intellectual property right. Reproduction of this manual, or parts thereof, in any form, without the express written permission of

Avenview Inc. is strictly prohibited.

www.avenview.com

Table of Contents

Section 1: Getting Started ...................................................................................................................... 3

1.1 Important Safeguards ............................................................................................................ 3

1.2 Safety Instructions ................................................................................................................. 3

1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4

1.4 Introduction ........................................................................................................................... 4

1.5 Package Contents................................................................................................................... 4

1.6 Before Installation.................................................................................................................. 4

1.7 Installation ............................................................................................................................. 5

1.8 Troubleshooting..................................................................................................................... 6

1.9 Caution................................................................................................................................... 6

Section 2: Specification .......................................................................................................................... 7

2.1: Display Port Pin Assignment ........................................................................................................... 8

www.avenview.com

Section 1: Getting Started

1.1 Important Safeguards

Please read all of these instructions carefully before you use the device. Save this manual for future

reference.

What the warranty does not cover

Any product, on which the serial number has been defaced, modified or removed.

Damage, deterioration or malfunction resulting from:

Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product

modification, or failure to follow instructions supplied with the product.

Repair or attempted repair by anyone not authorized by us.

Any damage of the product due to shipment.

Removal or installation of the product.

Causes external to the product, such as electric power fluctuation or failure.

Use of supplies or parts not meeting our specifications.

Normal wear and tear.

Any other causes which does not relate to a product defect.

Removal, installation, and set-up service charges.

1.2 Safety Instructions

The Avenview FO-DP-300M-EMI, Display Port Extender over Fiber Optic has been tested for conformity

to safety regulations and requirements, and has been certified for international use. However, like all

electronic equipment’s, the FO-DP-300M-EMI should be used with care. Read the following safety

instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.

Do not dismantle the housing or modify the module.

Dismantling the housing or modifying the module may result in electrical shock or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing housing may expose you to

dangerous voltage or other hazards

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or

liquid falls or spills on to the housing, unplug the module immediately.

Have the module checked by a qualified service engineer before using it again.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device

before cleaning.

Do not view directly into the laser module of transmitter or the end of the other side of optical

cable connected to transmitter with an optical instrument.

www.avenview.com

1.3 Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this

equipment.

1.4 Introduction

FO-DP-300M-EMI, Optical DISPLAY PORT extension module,

This unique fiber optical transceiver let your display device extend up to 300 meters (1000ft) away from

host based on Display Port standard without signal degradation at WQXGA (2560X1600) resolution.

High Speed and long distance transmission by optical system

Compatible with Display Port standard V1.1a

Main-link video signal / AUX data and Hot Plug Detection signal is transmitted by 1ch

multi-mode fiber

DPCD compliant (No support HDCP mode)

External Power supply

1.5 Package Contents

Before you start the installation of FO-DP-300M-EMI, please check the package contents.

-Transmitter x 1

-Receiver x 1

-Power Adapter (5VDC, 2A) x 1

User’s Manual x 1

1.6 Before Installation

Put the product in an even and stable location. If the product falls down or drops, it may cause

an injury or malfunction.

Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C)

or high humidity.

Use the DC power adapter with correct specifications. If inappropriate power supply is used

then it may cause a fire.

Do not twist or pull by force ends of the optical cable. It can cause malfunction.

www.avenview.com

1.7 Installation

This product is composed of a Transmitter and a Receiver.

The Transmitter should be connected to the source (Computer’s DISPLAY PORT ) and the Receiver

should be connected the DISPLAY PORT of the digital display device (Monitor). Avenview

FO-DP-300M-EMI Transmitter / Receiver is designed to be used with SC type standard optical cable

(Multi-Mode optical fiber: 50/125, 62.5/125um). Connect Multi-mode SC connector type 1 channel

standard fiber optic cable between transmitter and receiver. Connect power adapters (or USB power

cable) to both of transmitter and receiver module.

www.avenview.com

1.8 Troubleshooting

General Troubleshooting

Problem

Possible Solution

No Image

Check if the PC Power is on

Check if connection to the computer and the monitor

are correct.

Turn the PC Power off and on again.

Please use DC adapter (5V, 2A) included in the package

for transmitter and receiver.

LCD Screen Defects Appear

This product supports up to WUXGA resolution.

Check the maximum resolution range of the graphics

card.

1.9 Caution

1. Do not put heavy object on top of the FO-DP-300M-EMI. It may cause product malfunction.

2. Put the product on even and stable location. If the product falls down or dropped, it may get

damaged.

3. Keep away from high temperature (over 50°C), low temperature (under 0°C) or high humidity.

It may cause a fire and injury by electrical shock.

4. Use DC power adapter with correct specification. Otherwise it may cause fire.

5. Use the multimode (50/125um) optical fiber.

6. Do not view directly laser module of transmitter or the end of the other side of optical cable

connected to transmitter with optical instrument.

7. Do not twist or pull by force either ends of the optical cable. It can cause malfunction.

Minimum bending diameter is 45mm

www.avenview.com

Section 2: Specification

Item

Description

Units

FO-DP-300-EMI (Transmitter)

FO-DP-300-EMI (Receiver)

Unit Description

DisplayPort Extender Transmitter

DisplayPort Extender Receiver

Input Signal

DisplayPort Signal v1.1a

Output Signal

DisplayPort Signal v1.1a

Video Bandwidth

3.5Gbps / Channel

Supported Resolution &

Distance *

WQXGA 2560 x 1600 @ 300 meters (1000 feet)

Electrical Connector

20 Pin DisplayPort Plug

Dimensions (L x W x H)*

2.91” x 1.30” x 0.45”

Power Supply

5V 2A DC

Power Consumption

1.5W (max)

Optical

Optical Source

850nm VCSEL

O/E Converter

PIN Photo Diode

Fiber

Multi-Mode optical Fiber(SC Type Connector)

Fiber Type

50/125 µm Multi-mode glass fiber OM2 or OM3 rated fiber

Environmental

Operating Temperature

32˚~ 104˚F (0˚to 40˚C)

Storage Temperature

-4˚~ 140˚F (-20˚~ 60˚C)

Relative Humidity

20~90% RH (no condensation)

www.avenview.com

2.1: Display Port Pin Assignment

TRANSMITTER

Signal Assignment

MainLinkLane 0+

MainLinkLane2-

AuxiliaryChannel-

Ground

MainLinkLane 3+

HotPlugDetect

MainLinkLane 0-

Ground

Return

MainLinkLane 1+

MainLinkLane 3-

Connector Power

(3.3V,500mA)

Ground

Configuration1

MainLinkLane 1-

Configuration2

MainLinkLane 2+

AuxiliaryChannel+

Ground

RECEIVER

Signal Assignment

MainLinkLane 0+

MainLinkLane2-

AuxiliaryChannel-

Ground

MainLinkLane 3+

HotPlugDetect

MainLinkLane 0-

Ground

Return

MainLinkLane 1+

MainLinkLane 3-

Connector Power

(3.3V,500mA)

Ground

Configuration1

MainLinkLane 1-

Configuration2

MainLinkLane 2+

AuxiliaryChannel+

Ground

www.avenview.com

Disclaimer

While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the

operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission

of Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss

of anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or

use of the Avenview hardware, software, or other products and documentation provided herein.

Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve

reliability, function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or

implied warranties regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a

particular purpose, and non-infringement.

Inhaltsverzeichnis

Andere Avenview Extender Handbücher

Avenview

Avenview FO-DVI-DL-1000M Bedienungsanleitung

Avenview

Avenview FO-DVI-1000M-EMIX Bedienungsanleitung

Avenview

Avenview HDM3D-C53X-SET Bedienungsanleitung

Avenview

Avenview HDM3D-C53X-SET Bedienungsanleitung

Avenview

Avenview HDM-C6VWIP-SET Bedienungsanleitung

Avenview

Avenview HDM-SHAREPRO-IP Bedienungsanleitung

Avenview

Avenview FO-HDSDI-SET Bedienungsanleitung

Avenview

Avenview HDM-C6IP-SET Bedienungsanleitung

Avenview

Avenview FO-DVI-1080LC-Set Bedienungsanleitung

Avenview

Avenview HDM-C5SP-8SRSR Bedienungsanleitung

Avenview

Avenview C-USB-HDM Bedienungsanleitung

Avenview

Avenview HDM-SHAREPRO-IP Bedienungsanleitung

Avenview

Avenview WL-VGA-EXT Bedienungsanleitung

Avenview

Avenview Cat5 Bedienungsanleitung

Avenview

Avenview W-HDM3D-100-SET Bedienungsanleitung

Avenview

Avenview HDM-C5XD-S Bedienungsanleitung

Avenview

Avenview HDM3D-C5SP-4 Bedienungsanleitung

Avenview

Avenview HDSD FO-HDSDI-L-SET Bedienungsanleitung

Avenview

Avenview HDMI-C5-3-SET Bedienungsanleitung

Avenview

Avenview VGA-C5A-SET Bedienungsanleitung

Avenview

Avenview HDM-C6IPX-SET Bedienungsanleitung

Avenview

Avenview FO-HDM4K-200-EMIX Bedienungsanleitung

Avenview

Avenview VGA-C5A-R Bedienungsanleitung

Avenview

Avenview FO-HDM-1000M-EMI Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung