Avenview FO-DVI-1080LC-Set Bedienungsanleitung
www.avenview.com
1
FO-DVI-1080LC Series
User’s Guide
Models
FO-DVI-1080LC-Set
© 2007 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations
or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to
specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual
property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes
no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied
warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly
prohibited.
www.avenview.com
2
Table of Contents
Section 1: Getting Started...................................................................................................................... 3
1.1 Important Safeguards ............................................................................................................ 3
1.2 Safety Instructions ................................................................................................................. 4
1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4
1.4 Introduction ........................................................................................................................... 4
1.5 Package Contents................................................................................................................... 4
1.6 Before Installation.................................................................................................................. 5
1.7 Installation ............................................................................................................................. 5
1.8 General Troubleshooting ....................................................................................................... 6
Section 2: Specifications......................................................................................................................... 7
www.avenview.com
3
Section 1: Getting Started
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
www.avenview.com
4
1.2 Safety Instructions
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid
falls or spills on to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
Avenview FO-DVI-1080LC Series with fiber optic cable system lets you extend digital flat panel signal up to 100
meters (330 feet).
-High Speed and long distance transmission by LC type Multi-Mode fiber
-Use standard DVI Plug and LC Fiber connector
-R, G, B, Clock signal is transmitted separately by Multi-Mode optical Fiber
-Supports up to WUXGA (1920 x 1200) resolution
-Self detecting function for EDID
-Optional external power supply (Automatic Power switch is included)
1.5 Package Contents
Before you start the installation of the converter, please check the package contents.
-Transmitter x 1 pc
-Receiver x1 pc
-Power Adapter (5VDC, 1.2A)
-User’s Manual
www.avenview.com
5
1.6 Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
1.7 Installation
This product is composed of a transmitter and a receiver. The transmitter should be connected to the
computer’s DVI Port and the receiver should be connected the DVI Port of the digital display device. Avenview
FO-DVI-1080LC Transmitter is designed to be used with the LC type standard optical cable. It is marked with R,
G, B, O. Connect “R” to Red color, “G” to Green color, “B” to blue and “O” to orange color connector.
Connection diagram of FO-DVI-1080LC
Use the DC adapter (included in the package) for the Receiver. The Transmitter which is
connected to a computer uses power from the computer.
www.avenview.com
6
Avenview FO-DVI-1080LC is designed to self detect the resolution of the monitor and change the resolution
accordingly. Follow these steps for connecting to a device:
1. Power on your display
2. Connect Transmitter to the DVI of display
3. Plug the DC power of Transmitter
4. Pull out after about 5 –10 seconds for reading the EDID information from the display
5. Connect Transmitter to the PC and Receiver to the Display.
6. At the same time, connect DC power to the receiver
7. Connect the optical fiber between Transmitter and Receiver.
8. Restart the computer.
1.8 General Troubleshooting
Problem
Possible Solution
No Image
Check if the PC Power is on
Check if connection to the computer and the monitor are
correct.
Turn the PC Power off and on again.
Screen Defects Appear
This product supports up to SXGA resolution.
Check the maximum resolution range of the graphics card.
www.avenview.com
7
Section 2: Specifications
Item
Description
Video Bandwidth
1.65Gbps (Single Link)
Connector
DVI 24Pin Plug and LC Connector
Power Consumption
0.75 Watt (max)
Supported Resolution
and Distance
SXGA 1280 x 1024 @ 700 meters (2300 feet)
UXGA 1600 x 1200 @ 500 meters (1650 feet)
WUXGA 1920 x 1200 @ 100 meters (330 feet)
Optical
Optical Source
850nm VCSEL
O/E Converter
PIN Photo Diode
Fiber Type
50/125 or 62.5/125 LC Multi-Mode Fiber
Environmental
Operation
0˚to 50˚C Degree
Storage
-20˚ to 70˚C Degree
www.avenview.com
8
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the
Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and
non-infringement.
Andere Handbücher für FO-DVI-1080LC-Set
1
Inhaltsverzeichnis
Andere Avenview Extender Handbücher
Avenview
Avenview C5-USB-200 Bedienungsanleitung
Avenview
Avenview VGA-C5-SP-8 Bedienungsanleitung
Avenview
Avenview HDMI-C5-S Bedienungsanleitung
Avenview
Avenview VGA-C5RS-SET Bedienungsanleitung
Avenview
Avenview DVI-C5-M-SET Bedienungsanleitung
Avenview
Avenview HBT-C6PLT-R Bedienungsanleitung
Avenview
Avenview HDMI-C5SP-4 Bedienungsanleitung
Avenview
Avenview HDM-C5SP-8 Bedienungsanleitung
Avenview
Avenview FO-HDM2-T4K-SET Bedienungsanleitung
Avenview
Avenview HDSD FO-HDSDI-L-SET Bedienungsanleitung
Avenview
Avenview C5-USB-200 Bedienungsanleitung
Avenview
Avenview HDM-SHAREPRO-IP Bedienungsanleitung
Avenview
Avenview DVI-C5-LC-R Bedienungsanleitung
Avenview
Avenview VGA-C5ARS-SET Bedienungsanleitung
Avenview
Avenview FO8K-DP MM Series Bedienungsanleitung
Avenview
Avenview FO-DVI-1000M-EMI Bedienungsanleitung
Avenview
Avenview W-HDM3D-100-SET Bedienungsanleitung
Avenview
Avenview USB-C6-50M Bedienungsanleitung
Avenview
Avenview KVM-C5 Series Bedienungsanleitung
Avenview
Avenview FO-DVI-DL-330X Bedienungsanleitung
