Avenview FO-HDMI-XX-MM Bedienungsanleitung

www.avenview.com

HDMI Extender over Fiber Optic Cable

Model #: FO-HDMI-XX-MM

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with

respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any

time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in

Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products

including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.

www.avenview.com

Table of Contents

Section 1: Getting Started ...................................................................................................................... 3

1.1 Important Safeguards ............................................................................................................ 3

1.2 Safety Instructions ................................................................................................................. 3

1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4

1.4 Introduction ........................................................................................................................... 4

1.5 Model Description ................................................................................................................. 5

1.6 Package Contents................................................................................................................... 5

1.7 Before Installation.................................................................................................................. 5

1.8 Installation ............................................................................................................................. 6

Section 2: Specifications......................................................................................................................... 7

2.1 Part List......................................................................................................................................... 8

2.2 Power Consumption and DDC Power Requirements................................................................... 9

2.3 Signal Pin Assignment .................................................................................................................. 9

2.4 FO-HDMI-XX-MM Cable Construction........................................................................................ 10

2.4.1 Wiring Diagram ................................................................................................................... 11

www.avenview.com

Section 1: Getting Started

1.1 Important Safeguards

Please read all of these instructions carefully before you use the device. Save this manual for future

reference.

What the warranty does not cover

Any product, on which the serial number has been defaced, modified or removed.

Damage, deterioration or malfunction resulting from:

Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized

product modification, or failure to follow instructions supplied with the product.

Repair or attempted repair by anyone not authorized by us.

Any damage of the product due to shipment.

Removal or installation of the product.

Causes external to the product, such as electric power fluctuation or failure.

Use of supplies or parts not meeting our specifications.

Normal wear and tear.

Any other causes which does not relate to a product defect.

Removal, installation, and set-up service charges.

1.2 Safety Instructions

The Avenview FO-HDMI-XX-MM, HDMI Extender System over Fiber Optic, has been tested for conformance to

safety regulations and requirements, and has been certified for international use. However, like all electronic

equipment’s, the FO-HDMI-XX-MM should be used with care. Read the following safety instructions to protect

yourself from possible injury and to minimize the risk of damage to the unit.

Do not dismantle the housing or modify the module.

Dismantling the housing or modifying the module may result in electrical shock or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing housing may expose you to

dangerous voltage or other hazards

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid

falls or spills on to the housing, unplug the module immediately.

Have the module checked by a qualified service engineer before using it again.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before

cleaning.

www.avenview.com

1.3 Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this

equipment.

1.4 Introduction

Avenview FO-HDMI-XX-MM Series with fiber optic cable system lets you extend digital flat panel signal up to

100 meters (330 feet) without signal degradation by at 1080p resolution.

-High Speed and long distance transmission by Optical fiber

-Fully compatible with HDMI 1.3

-Supports 12 bit Deep Color

-Uses standard Type A HDMI receptacle

-DDC and CEC signal and 5V power line are transmitter by copper line

-HDCP Compliant

www.avenview.com

1.5 Model Description

FO-HDMI-XX-MM

Model Name Length in Meters (5 = 5 meters, 10 = 10 meters)

1.6 Package Contents

Before you start the installation of the converter, please check the package contents.

-HDMI Optical Cable with Transmitter and Receiver x 1

-User’s Manual x 1

1.7 Before Installation

Put the product in an even and stable location. If the product falls down or drops, it may cause an

injury or malfunction.

Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high

humidity.

Use the DC power adapter with correct specifications. If inappropriate power supply is used then it

may cause a fire.

Do not twist or pull by force ends of the optical cable. It can cause malfunction.

www.avenview.com

1.8 Installation

Avenview FO-HDMI-XX-MM is composed of a Transmitter converting the graphic signal of a computer to

optical and Optical Fiber propagating the optical signal and Receiver supplying electrical signal to monitor

converted from the optical signal to electrical signal. The Transmitter should be connected to computer and

the Receiver should be connected to a monitor.

Avenview FO-HDMI-XX-MM is designed to self-detect the resolution of the monitor and change the resolution

accordingly. Follow these steps for connecting to a device:

To setup Avenview FO-HDMI-XX-MM follow these steps for connecting to a device:

1. Power on your display

2. Connect Transmitter to the PC and Receiver to the Display.

3. Connect the optical fiber between Transmitter and Receiver.

4. Restart the computer.

Use the DC power adapter (optional) with correct specification. The Transmitter which is connected to a

computer uses power from the computer.

Do not twist or pull by force the both ends of the optical cable. It may cause malfunction

www.avenview.com

Section 2: Specifications

Item

Description

Units

FO-HDMI-XX-MM (Transmitter)

FO-HDMI-XX-MM (Receiver

Unit Description

HDMI Fiber Optic Transmitter

HDMI Fiber Optic Receiver

HDMI Compliance

HDMI 1.3

DVI Compliance

DVI 1.0

HDCP Rev

1.1

Input Signal

TMDS Signal (HDMI 1.3 Standard)

Output Signal

TMDS Signal (HDMI 1.3 Standard)

Video Bandwidth

12bit Deep Color / 60Hz

Supported Resolution &

Distance

Up to WUXGA (1920x1200), 1080p @ 100 meters ( 330 feet)

Optical Converter

4 ch 850 nm Multi-Mode VCSEL

4 ch GaAs PIN photo Diode

HDMI Connector

19 pin HDMI Plug

Fiber Type

50/125 µm Multi-mode glass fiber

Power Consumption

0.8W (max)

1.05W (max)

Bending Radius

70mm

Dimensions (L x W x H)

1” x 2.9” x 0.8”

Environmental

Operating Temperature

32˚~ 104˚F (0˚to 40˚C)

Storage Temperature

-4˚~ 140˚F (-20˚~ 60˚C)

Relative Humidity

20~90% RH (no condensation)

Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to

the device. This is a stress rating only and functional operation of the device at these or any other

conditions above those indicated in the operations section for extended periods of time may affect

reliability.

www.avenview.com

2.1 Part List

Item

Description

Q’ty

Material

DVI-D Single Link 18 Plug

Glass

filled

thermoplastic

UL94V-0

DVI Case-Top, Bottom

Glass

filled

UL94V-0

DVI Thumb Screw

SUM

24L+ABS

Stopper

PVC

55%

Epoxy Printed Circuit Board for Tx

FR-4,

1.5t

UL94V-0

Optical Connector for VCSEL,PD

PA46

UL94V-0

C5210

Optical Connector for fiber

PA46

UL94V-0

Epoxy Printed Circuit Board for Rx

FR-4,

1.5t

UL94V-0

Vertical Surface Emitting Laser Diode

GaAs

Photo Detector

GaAs

4 fiber 5 copper DVI Optic Cable

See

Section

4 fiber DVI Optic Cable

See

Section

Label

Polyester-matte

3.3mil

DC Power Jack

Polyamide

6/6

DC Power Adaptor

E191362

(UL

No)

www.avenview.com

2.2 Power Consumption and DDC Power Requirements

Power consumption of FO-HDMI-XX-MM Transmitter and Receiver Module

Item

maximum

unit

Transmitter

0.8

Watt

Receiver

1.05

Watt

Transmitter module of FO-HDMI-XX-MM without external power supply is operated by drawing out power for

DDC from the computer and receiver module of FO-HDMI-XX-MM cable also utilize the DDC power delivered

via copper wire.

2.3 Signal Pin Assignment

Transmitter / Receiver

Signal Assignment

T.M.D.S. Data2+

T.M.D.S. Data0-

DDC/CECGround

T.M.D.S. Data2 Shield

T.M.D.S. Clock+

+5VPower

T.M.D.S. Data2-

T.M.D.S. Clock Shield

Hot Plug Detect

T.M.D.S. Data 1+

T.M.D.S. Clock-

T.M.D.S. Data 1 Shield

CEC

T.M.D.S. Data 1-

Reserved (N.C on device)

T.M.D.S. Data 0+

SCL

T.M.D.S. Data 0 Shield

SDA

If graphic board of the computer does not supply over 0.6A, 5V, FO-HDMI-XX-MM cable

may not operate normally.

www.avenview.com

2.4 FO-HDMI-XX-MM Cable Construction

The construction of 4 Optical Fibers and 4 Copper wires cable shall be in accordance with Figure and

Table below:

The Dimension of FO-HDMI-XX-MM Cable

Items

Unit

Specification

DVI Cable Make-up

Layer Stranding

Drain Wires (Size/Stranded)

mm(AWG)

-0.203/7 (24)

AL-Mylar Screen Shield

A helically

Cable Outer Diameter

7.40±0.20

Jacket Color

FR-PVC(Orange, Blue, Black)

Cable Marking

If need

Fiber Cable Construction

Item

Description

Optical

Fiber

Number

Structure

Figure 1

Strength Member

Aramid Yarn

Outer

Jacket

Material

FR-PVC(Yellow)

Approx.Thickness

1.6mm

Nominal Outside Diameter

4.0±0.4mm

Approximate Net Weight

10kg/km

Cable Identification

on outer jacket

OPTICAL HDMB CABLE

Inhaltsverzeichnis

Andere Avenview Extender Handbücher

Avenview

Avenview FO-DVI-1080LC-Set Bedienungsanleitung

Avenview

Avenview VGA-C5A-R Bedienungsanleitung

Avenview

Avenview W-HDM3D-100-SET Bedienungsanleitung

Avenview

Avenview HDSD FO-HDSDI-L-SET Bedienungsanleitung

Avenview

Avenview HDM-SHAREPRO-IP Bedienungsanleitung

Avenview

Avenview HDM-C5-3X-SET Bedienungsanleitung

Avenview

Avenview C5-USB-200 Bedienungsanleitung

Avenview

Avenview HDM-C6IP-SET Bedienungsanleitung

Avenview

Avenview FO-DVI-1080X-SET Bedienungsanleitung

Avenview

Avenview HBT-C6IR-SET Bedienungsanleitung

Avenview

Avenview DVI-C5-LC-R Bedienungsanleitung

Avenview

Avenview FO-HDSDI-SET Bedienungsanleitung

Avenview

Avenview W-HD3DIR-50M Bedienungsanleitung

Avenview

Avenview HDM-C5SP-4 Bedienungsanleitung

Avenview

Avenview FO-DVI-1000M-EMI Bedienungsanleitung

Avenview

Avenview HBT-C6BPOC-SET Bedienungsanleitung

Avenview

Avenview VGA-C5-SP-8 Bedienungsanleitung

Avenview

Avenview FO-VGA-DVI Bedienungsanleitung

Avenview

Avenview HDM-SHAREPRO-IP Bedienungsanleitung

Avenview

Avenview FO-DP-XX-MM Bedienungsanleitung

Avenview

Avenview HDM-C5SP-8 Bedienungsanleitung

Avenview

Avenview FO-DVI-DL-1000M Bedienungsanleitung

Avenview

Avenview Cat5 Bedienungsanleitung

Avenview

Avenview HDM3D-C5SP-4 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung