Avenview SPLIT-HDSDI-6-RS Bedienungsanleitung

www.avenview.com

6 Port HD/SD-SDI Splitter with

Reclocking

User’s Guide

Models

SPLIT-HDSDI-6-RS

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations

or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to

specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual

property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes

no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied

warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly

prohibited.

www.avenview.com

Table of Contents

Section 1: Getting Started...................................................................................................................... 3

1.1 Important Safeguards ............................................................................................................ 3

1.2 Safety Instructions ................................................................................................................. 3

1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4

1.4 Introduction ........................................................................................................................... 4

1.5 Features ................................................................................................................................. 4

1.6 Package Contents................................................................................................................... 4

1.7 Before Installation.................................................................................................................. 5

1.8 Panel Description................................................................................................................... 5

Section 2: Installation............................................................................................................................. 7

Section 3: Specifications......................................................................................................................... 8

www.avenview.com

Section 1: Getting Started

1.1 Important Safeguards

Please read all of these instructions carefully before you use the device. Save this manual for future

reference.

What the warranty does not cover

Any product, on which the serial number has been defaced, modified or removed.

Damage, deterioration or malfunction resulting from:

Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized

product modification, or failure to follow instructions supplied with the product.

Repair or attempted repair by anyone not authorized by us.

Any damage of the product due to shipment.

Removal or installation of the product.

Causes external to the product, such as electric power fluctuation or failure.

Use of supplies or parts not meeting our specifications.

Normal wear and tear.

Any other causes which does not relate to a product defect.

Removal, installation, and set-up service charges.

1.2 Safety Instructions

The SPLIT-HDSDI-6-RS, 6 Port HD/SD-SDI splitter with reclocking has been tested for conformance to safety

regulations and requirements, and has been certified for international use. However, like all electronic

equipments, the SPLIT-HDSDI-6-RS should be used with care. Read the following safety instructions to protect

yourself from possible injury and to minimize the risk of damage to the unit.

Do not dismantle the housing or modify the module.

Dismantling the housing or modifying the module may result in electrical shock or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing housing may expose you to

dangerous voltage or other hazards

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid

falls or spills on to the housing, unplug the module immediately.

Have the module checked by a qualified service engineer before using it again.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before

cleaning.

www.avenview.com

1.3 Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this

equipment.

1.4 Introduction

The Avenview SPLIT-HDSDI-6-RS receives one SDI input, perfectly duplicates it, and re-transmits four SDI

outputs for real time multi-viewing. It is a reliable video device splitting a SDI or HD-SDI video source to four

HD-SDI or SD-SDI displays at the same time.

1.5 Features

-HD/SD dual-rate distribution

-6 separately buffered outputs

-HD cable equalization (Beldon 1694A)

-Dual color LED indication of input lock and rate

-Pass all ancillary data

-Provides automatic input cable equalization up to 300m (1000ft)

-Inter-locked power supply for better fixedness

-Reclocking SDI signals for cascading and longer transmission

1.6 Package Contents

Before you start the installation of the converter, please check the package contents.

-SPLIT-HDSDI-6-RS x 1

-Power Adapter (+5VDC) x1

-User’s Manual x1

www.avenview.com

1.7 Before Installation

Put the product in an even and stable location. If the product falls down or drops, it may cause an

injury or malfunction.

Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high

humidity.

Use the DC power adapter with correct specifications. If inappropriate power supply is used then it

may cause a fire.

Do not twist or pull by force ends of the optical cable. It can cause malfunction.

1.8 Panel Description

FRONT PANEL

1. HD/SD-SDI Input

2. LED –Reserved

3. HD/SD-SDI Output 5

4. LED –Power Indicator

5. HD/SD-SDI Output 6

6. 5V DC power Jack

REAR PANEL

7. HD/SD-SDI Output 1

8. HD/SD-SDI Output 2

9. HD/SD-SDI Output 3

10. HD/SD-SDI Output 4

www.avenview.com

Bottom Panel

PIN 1 - OFF

PIN 2 –OFF

Auto rate detect (143 Mbps rate operation supported only in ARD mode)

PIN 1 - OFF

PIN 2 –ON

270 Mbps

PIN 1 –ON

PIN 2 –OFF

1483 / 1485 Mbps

PIN 3 - OFF

Automatically reclocks bypassed SDI signals

PIN 3 - ON

Force to bypass SDI signal

PIN 4 - OFF

Default Operation mode

www.avenview.com

Section 2: Installation

Follow these instructions for installation of SPLIT-HDSDI-6-RS:

1. Ensure SPLIT-HDSDI-6-RS and all other source devices are turned off

2. Connect a camera or other HD/SD-SDI device to Input of SPLIT-HDSDI-6-RS

3. Connect devices equipped with HD/SD-SDI inputs (e.g. monitors or video processors) to

SPLIT-HDSDI-6-RS outputs

4. Turn ON all devices connected to output of SPLIT-HDSDI-6-RS

5. Plug power adapter to 5V DC power jack of SPLIT-HDSDI-6-RS

HD/SD-SDI Camera

6 HD/SD-SDI Displays

SPLIT-HDSDI-6-RS

www.avenview.com

Section 3: Specifications

Item

Description

Model

SPLIT-HDSDI-6-RS

SDI Standards

SD-SDI & HD-SDI

Auto HD/SD-SDI Detection

Yes

Supported Protocols

SMPTE 259M, SMPTE 292M / HDTV (1.485Gbps and 1.485/1.001Gbps)

Video Bandwidth

[1.485Gpbs & 1.485/1.001Gbps]

Data Rates

270 / 1483 / 1485 Mbps

Supported Video

[HD] 720p50/59.94/60, 1035i50/59.94/60, 1080i50/59.94/60, 1080p24/30

[SD] [email protected], PAL@50Hz

SDI signal type

SMPTE-292M, SMPTE-259M

Output impedance

75

Reclocking function

Yes

Cable equalization

[HD-SDI] up to 150m (500ft) / [SD-SDI] up to 300m (1000ft)

Audio support

Yes

RP-918 pathological

patterns

Immune

Input Connectors

1x BNC [SDI]

Output Connectors

6x BNC [SDI]

BNC connector

75inter-locked socket

Eye pattern characteristics

Amplitude: Within 800mV ±3% (<10%)

Rise overshoot: Less than 2% (<10%)

Fall overshoot: Less than 2% (<10%)

Long time jitter: 0.195μ (<1.0μ)

Timing jitter: 0.195μ (<1.0μ)

Alignment jitter: 0.127μ (<0.2μ)

Dimensions

5.7” x 3.2” x 1” (L x W x H)

Weight

335g

Power Supply

5V 4A DC

Power Consumption

10 Watts (max)

Operating Temperature

0~40°C [32~104°F]

Storage Temperature

-20~60°C [-4~140°F]

Relative Humidity

20~90% RH [no condensation]

www.avenview.com

Disclaimer

While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the

operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of

Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of

anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the

Avenview hardware, software, or other products and documentation provided herein.

Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,

function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties

regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and

non-infringement.

Inhaltsverzeichnis

Andere Avenview Medienkonverter Handbücher

Avenview

Avenview C-CVID-HDM Bedienungsanleitung

Avenview

Avenview HDM-C6MWIP4K-SET Bedienungsanleitung

Avenview

Avenview C-VGA-HDM Bedienungsanleitung

Avenview

Avenview SPLIT-DPDL-4A Bedienungsanleitung

Avenview

Avenview C-COMP-HDSDI Bedienungsanleitung

Avenview

Avenview C-VGA-DVI Bedienungsanleitung

Avenview

Avenview DVI-PROWALL-12X Bedienungsanleitung

Avenview

Avenview HDM-C6MWIP-SET-V3 Bedienungsanleitung

Avenview

Avenview C-VGA-DVI Bedienungsanleitung

Avenview

Avenview C-DVIA-HDMI Bedienungsanleitung

Avenview

Avenview SC-HDM-HD42K Bedienungsanleitung

Avenview

Avenview HDM-C6IP4K-SET Bedienungsanleitung

Avenview

Avenview DVI-VIDEOWALL-4X Bedienungsanleitung

Avenview

Avenview VGA-C5-SP-12 Bedienungsanleitung

Avenview

Avenview C-COMP-HDSDI Bedienungsanleitung

Avenview

Avenview DVI-SPLITPRO-4X Bedienungsanleitung

Avenview

Avenview HDM-SPLITPRO-4A Bedienungsanleitung

Avenview

Avenview C-VGA-DVI Bedienungsanleitung

Avenview

Avenview C-HDM-COMPVGA-A Bedienungsanleitung

Avenview

Avenview C-DVI-VGA Bedienungsanleitung

Avenview

Avenview C-DVI-VGA Bedienungsanleitung

Avenview

Avenview HDM-XTRM-IP-SET Bedienungsanleitung

Avenview

Avenview HDM-C6MWIP-SET Bedienungsanleitung

Avenview

Avenview C-SC-UNI Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung