Avenview HDM-C6IP4K-SET Bedienungsanleitung
VIDEO WALLS VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS SPLITTERS WIRELESS
CABLES & ACCESSORIES
Control Your Video
HDMI 4K UNCOMPRESSED
ENCODER/DECODER OVER CATx
© 2015 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and claims any
express or implied warranty, relating to its products are is strictly prohibited.
Model #: HDM-C6IP4K-SET
Military Residential
Medical Aviation
Education Industrial
Corporate House Of Worship
www.avenview.com
Product Application & Market Sectors
www.avenview.com Page
3
TABLE OF CONTENTS
1. GETTING STARTED ..........................................................................................................................1
1.1 IMPORTANT SAFE GUARDS..............................................................................................................1
................................................................................................................1
1.2 SAFETY INSTRUCTIONS
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISIION (FCC) ........................... 2
2. INTRODUCTION ..............................................................................................................................3
.....................................................................................................................4 2.1 PACKAGE CONTENTS
2.2 BEFORE INSTALLATION ................................................................................................................... 4
2.3 APPLICATION DIAGRAM ..................................................................................................................5
2.4 PANEL DESCRIPTION ......................................................................................................................7
2.4.1 FRONT PANEL (SENDER/ENCODER, HDM-C6IP4K-S) ...
................................................7
2.4.2 REAR PANEL (SENDER/ENCODER, HDM-C6IP4K-S) .........................................................7
3. INSTALLATION (HDM-C6IP4K-SET) ...............................................................................................9
4. PC CONFIGURATOR .....................................................................................................................10
5. SPECIFICATIONS .............................. .............................................................................................19
6. TROUBLESHOOTING ....................................................................................................................20
2.4.3 FRONT PANEL (RECEIVER/DECODER, HDM-C6IP4K-R) ..................................................8
2.4.4 FRONT PANEL (RECEIVER/DECODER, HDM-C6IP4K-R) ..................................................8
www.avenview.com Page
1
SECTION 1: GETTING STARTED
1.1 IMPORTANT SAFE GUARDS
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
•Any product, on which the serial number has been defaced, modified or removed.
•Damage, deterioration or malfunction resulting from:
•Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
•Repair or attempted repair by anyone not authorized by us.
•Any damage of the product due to shipment.
•Removal or installation of the product.
•External causes to the product, such as electric power fluctuation or failure.
•u se of supplies or parts not meeting our specifications.
•Normal wear and tear.
•Any other causes which does not relate to a product defect.
•Removal, installation, and set-up service charges.
1.2 SAFETY INSTRUCTIONS
The Avenview HDM-C6IP4K-SET, HDMI IP Matrix Decoder/Encoder has been tested for conformance to safety regulations and
requirements, and has been certified for international use. However, like all electronic equipments, the HDM-C6IP4K-SET should
be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk of damage
to the unit.
! Do not dismantle the housing or modify the module.
! Dismantling the housing or modifying the module may result in electrical shock or burn.
! Refer all servicing to qualified service personnel.
! Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
or other hazards
! k eep the module away from liquids.
! Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
to the housing, unplug the module immediately.
! Have the module checked by a qualified service engineer before using it again.
! Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
1. GETTING STARTED
www.avenview.com Page
2
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)
This equipment has been tested and found to comply with part 15 of the f CC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols Description
ONlY USE THE PROVIDED POWER CABLE OR POWER
ADAPTER SUPPLIED. DO NOT TAMPER WITH THE
ELECTRICAl PARTS. THIS MAY RESULT IN El ECTRICAL
SHOCK OR BURN.
DO NOT TAMPER WITH THE UNIT. DOING SO WIll
VOID THE WARRANTY AND CONTINUED USE OF
THE PRODUCT
THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.
PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON
A SURFACE, IT SHOULD BE IN A GROUNDED
ENVIROMENT.
www.avenview.com Page
3
2. INTRODUCTION
The Avenview HDM-C6IP4K-SET, HDMI IP Matrix Decoder/Encoder enables the extension, switching and composition of
real-time, uncompressed Ultra-HD AV signal with zero frame latency over 10 Gigabit Ethernet Switch, it receives the encoded
IP signal through LAN port and decodes video/audio signal out through HDMI interface, it also supports stereo de-embeding
and streaming resolutions up to 3840 x 2160@30Hz.
Point to Point - (Direct Connection with CAT5/6) - 328ft
Point to Multi - point with CAT5/6 requires a POE Network Switch which supports port based, IGMP v2.0 or above protocol.
for large application, we would recommend Dell Networking 5500 series, which use 2 HDMI port or 2 SFP port to cascade.
Matrix Function – with CAT 5/6 cable without any signal loss add multiple Sources to multiple encoders which links via LAN
by cascading any POE Gigabit Ethernet switches up to 3 layer network, to the decoder connected to the HD Monitors at
different locations on the Network. Transporting 4K or Full HD 1080p video and internally JPEG video compression adapts to
available network bandwidth if needed while retaining vivid picture with PCM audio.
- NOTE: The QUALITY and TRANSMISSION of the video signals depends on the characteristics and quality of the UTP cables
and Network Infrastructure . We recommend any Network Switches with 10GB POE IGMP v2.0 support . Tested and configured
on the below models
FEATURES:
- Uncompressed HDMI digital video signal up to 3840 x 2160@30Hz and 3D support;
- Supports 4K signal at 6 GbE and 1080P signal at 1.485GbE
- Lower end-to-end latency at 30ms;
- Supports point to point transmission, distance up to 100m with 4K signal;
- Supports point to multiple, multiple to multiple mode via 10GbE Ethernet Switch;
- Instant and seamless switching between Non-HDCP and same timing sources;
- Independent analog audio input and output at 2-channels, 24-bits@48KHz/channel;
- Supports Bi-directional IR;
- Supports Bi-directional RS232 With 10/100/GbE auto sensing port, for PC control and device upgrades;
- Control Software;
Other features include:
www.avenview.com Page
4
2.1 PACKAGE CONTENTS
Before you start the installation of the HDMI Extender, please check the package contents.
1HDM-C6IP4K-SET
(HDM-C6IP4K-S)
(HDM-C6IP4K-R)
X 2
2Power Brick (+12V DC 2A) + Power Cord X2
User Guide X 1
2.2 BEFORE INSTALLATION
•put the product in a level and stable location. If the product falls, it may cause damage or malfunction to components
within the casing.
•Do not place the product in temperatures under 0˚C or over 50˚C. High humidity may also cause the unit to malfunction.
•u se the DC power adapter with correct specifications supplied with the unit. If the improper power supply is used, this
may result in malfunction of the unit and may cause fire.
•Do not twist or pull by force the ends of the UTP cable. It will cause malfunction.
Right and Left Ear Rack Sets X4
Phoenix Connector (Male, 3.5 mm, 3 pins) X 1
3
5
6
www.avenview.com Page
5
2.3 APPLICATION DIAGRAM
www.avenview.com Page 6
www.avenview.com Page
7
2.4 PANEL DESCRIPTION
2.4.1 FRONT PANEL (Sender/Encoder, HDM-C6IP4K-S)
2.4.2 REAR PANEL (Sender/Encoder, HDM-C6IP4K-S)
456
3
217
1. Power LED: Indicates if unit is ON or OFF
2. Link LED (HDMI): Light ON indicates unit is receiving signal
3.Reserved LED: Reserved for manufacturer future use.
4.Link RX LED: Light ON indicates unit is on but not communicating, Slow Blinking: Indicates Sender/
Receiver communication
5.Status Indicator LED: Light ON indicates unit is on but not communicating, Fast Blinking: Indicates Sender/
Receiver communication
6.P1: Reserved for future use
7.Reserved: Reserved for future use
8.Power Connector: Connects to a power supply,
DC 12V 2A.
9.HDMI IN: Connects to HDMI Source.
10.RS 232: Device bi-directional communication 11.RJ-45 Port: Connect to Sender (Point to Point)
Connect to 10 Gigabit switch
12.SPDIF: Reserved for future use.13.IR Out : Connects to an IR transmitter
14.IR In: Connects to an IR receiver
16.Audio Out: Connects to audio output device
15.RJ-45 LAN : Connects to network switch or PC for
upgrading and software control
910 11 12 14
13
8 15 16
Andere Handbücher für HDM-C6IP4K-SET
1
Inhaltsverzeichnis
Andere Avenview Medienkonverter Handbücher
Avenview
Avenview C-COMP-VGA Bedienungsanleitung
Avenview
Avenview HDM-C6IP4K-SET Bedienungsanleitung
Avenview
Avenview 3G/HD/SD-SDI to HDMI Converter Bedienungsanleitung
Avenview
Avenview C-HDM-VGA Bedienungsanleitung
Avenview
Avenview HDM-C6MWIP-SET-V3 Bedienungsanleitung
Avenview
Avenview C-VGA-HDM Bedienungsanleitung
Avenview
Avenview HDM-C6MWIP-SET Bedienungsanleitung
Avenview
Avenview HDM-XTRM-IP-SET Bedienungsanleitung
Avenview
Avenview HDM-C6MWIP4K-SET Bedienungsanleitung
Avenview
Avenview SW-HVD-HDMA-4X1 Bedienungsanleitung
Avenview
Avenview C-MDP-HDMI Bedienungsanleitung
Avenview
Avenview HBT-C6POE-VGA-S Bedienungsanleitung
Avenview
Avenview C-COMPVGA-HDMI Bedienungsanleitung
Avenview
Avenview SPLIT-DPDL-4A Bedienungsanleitung
Avenview
Avenview SPLIT-HDM2-T4K-4-V2 Bedienungsanleitung
Avenview
Avenview C-HDM-COMP Bedienungsanleitung
Avenview
Avenview SPLIT-HDM2-T4K-2 Bedienungsanleitung
Avenview
Avenview MLT-EDGEPRO-2X2 Bedienungsanleitung
Avenview
Avenview C-HDSDI-HDMI Bedienungsanleitung
Avenview
Avenview SPLIT-3GHDSDI-4RS Bedienungsanleitung
