AWS AMW-810 Bedienungsanleitung
American Weigh Scales, Inc.
User Manual
AMW-810
Digital Kitchen Scale
g
kg
TARE
ON/OFF
American Weigh AMW-810
Thank you for purchasing the American Weigh AMW-
810 digital kitchen scale. Please read all operating
instructions carefully before use. This electronic scale
is a precision instrument. With normal care and proper
treatment, it will provide years of reliable service.
Never load the scale with more than the maximum
capacity. Overloading will permanently damage it!
Avoid any exposure to extreme heat or cold. Your
scale works better when operated at normal room
temperature. Always allow the scale to acclimatize to
normal room temperature for at least one hour before
use.
Give your scale sufcient warm up time. Usually
30-60 seconds before calibration to give the internal
components a chance to stabilize.
Keep your scale in a clean environment. Dust, dirt,
moisture, vibration, air currents and a close distance to
other electronic equipment can all cause an adverse
effect on the reliability and accuracy of your scale.
Handle with care. Gently apply all items to be weighed
onto the platform. Although this scale is designed to be
quite durable, try to avoid rough treatment as this may
permanently damage the internal sensor.
Avoid shaking, dropping or otherwise shocking the
scale. This is a precision instrument and must be
handled with extreme care.
Only operate the scale on a stable, vibration free
surface.
I. OPERATION
Always weigh on a at horizontal surface.
1. Before turning the scale on, set the switch on the
underside of the scale to the desired weighing mode
(kg/g or lb/oz).
2. Press [ON/OFF] key.
3. Wait until "0.0” or "0" is displayed.
4. Put the object(s) on the weighing platform / bowl.
II. TARE WEIGHING
When using the bowl to weigh or another
container, it is best to simply turn the scale on with
the container on the platform already. The scale
should go to zero. Otherwise you can use TARE:
1. Turn on scale as described above.
2. Place the "tare item" on the platform.
3. Press [TARE] and wait until "0.00" is displayed.
4. Add the "net-weight-item".
IV. TROUBLESHOOTING
The primary reasons for inaccuracy or malfunction
are low batteries, incorrect calibration, overload or
operating on an unstable surface. Please keep this in
mind and maintain and operate your scale properly.
This scale is a precise instrument and must be
handled with the utmost care and caution.
[Display] Elimination of errors
[LO] Replace the batteries.
[EE] You are overloading the scale. Remove the
excessive load immediately!
Model AMW-810-2K AMW-810-5K
Capacity 2000g / 4.4lb 5000g / 11.0lb
Resolution 1g / 0.1oz 1g / 0.1oz
Display 5 - Digit Backlit LCD
Bowl Dimensions
(inches) 7.75 x 7.75 x 2.25
Scale Dimensions
(inches) 7.0 x 7.0 x 2
Power 4 x AA Batteries (included)
Gross Weight 2 lbs
Specications
Inhaltsverzeichnis
Andere AWS Skala Handbücher
AWS
AWS Bioweich USB Bedienungsanleitung
AWS
AWS AMW-50 Bedienungsanleitung
AWS
AWS NutriBalance-5000 Bedienungsanleitung
AWS
AWS PC Series Bedienungsanleitung
AWS
AWS CM-500 Bedienungsanleitung
AWS
AWS CP-300 Bedienungsanleitung
AWS
AWS HX-502 Bedienungsanleitung
AWS
AWS AERO-100 Bedienungsanleitung
AWS
AWS V2-500 Bedienungsanleitung
AWS
AWS AWS-70 Bedienungsanleitung
AWS
AWS 330LPW Montageanleitung
AWS
AWS TL-330 (330lb x 0.2lb) Bedienungsanleitung
AWS
AWS ME-5KG Bedienungsanleitung
AWS
AWS HB-6 Bedienungsanleitung
AWS
AWS AWS-70 Bedienungsanleitung
AWS
AWS CG-Series Bedienungsanleitung
AWS
AWS MC series Bedienungsanleitung
AWS
AWS DK-5K Bedienungsanleitung
AWS
AWS AMW-500i Bedienungsanleitung
AWS
AWS AMW-TC200 Bedienungsanleitung
