AWS DigiPEN-500 Bedienungsanleitung
American Weigh Scales, Inc.
User Manual
Digital Hanging Scale
DigiPEN-500
DigiPen-500 Manual
Thank you for purchasing the American Weigh
DigiPen-500 digital hanging scale. Please read all
operating instructions carefully before use. This
electronic scale is a precision instrument. With normal
care and proper treatment, it will provide years of
reliable service.
Never load the scale with more than the maximum
capacity. Overloading will permanently damage it!
Avoid any exposure to extreme heat or cold. Your
scale works better when operated at normal room
temperature. Always allow the scale to acclimate to
normal room temperature for at least one hour before
use. Give your scale sufcient warm up time. Usually
30-60 seconds before calibration to give the internal
components a chance to stabilize.
Keep your scale in a clean environment. Dust, dirt,
moisture, vibration, air currents and a close distance to
other electronic equipment can all cause an adverse
effect on the reliability and accuracy of your scale.
Handle with care. Gently apply all items to be weighed
onto the hook. Although this scale is designed to be
quite durable, try to avoid rough treatment as this may
permanently damage the internal sensor.
Avoid shaking, dropping or otherwise shocking the
scale. This is a precision instrument and must be
handled with extreme care.
Only operate the scale on a stable, vibration free
surface.
I. OPERATION
It is recommended to hang the scale from a stable
support for best results.
1. Press [ON/OFF/TARE] key.
2. Wait until "0.0” is displayed.
3. Hang the item on the hook or attach it to the clip.
4. Using the [MODE] key, you can switch between
weighing units.
5. To turn the scale off, press and hold the [ON/OFF/
TARE] key.
II. TARE WEIGHING
1. Turn on scale as described above.
2. Place the "tare item" on the hook (such as another
hook accessory or empty bag).
3. Press [ON/OFF/TARE] key briey and wait until
"0.0" is displayed.
4. Add the "net-weight-item".
III. CALIBRATION
Calibration is NOT required before rst use. Only
calibrate if scale is not weighing properly. This scale
calibrates with 500g.
1.With the scale off, press the [ON/OFF/TARE] key
once to turn the scale on, then quickly press the
[ON/OFF/TARE] key four more times and hold it. A
random number will display, you can now release
the [ON/OFF/TARE] key.
2. Press the [ON/OFF/TARE] key one more time. The
scale will display "Zero" followed by "500g".
3. Gently hang the included 500g calibration hook
weight on the scales hook. Now press the [ON/OFF/
TARE] key one last time.
4. The scale will show "PASS". Calibration is complete.
IV. TROUBLESHOOTING
The primary reasons for inaccuracy or malfunction
are low batteries, incorrect calibration, overload or
operating under unstable conditions. Please keep this
in mind and maintain and operate your scale properly.
This scale is a precise instrument and must be
handled with the utmost care and caution.
[Display] Solution:
Nothing, ,
Change the batteries.
[EEEEE] You are overloading the scale. Remove the
excessive load immediately!
[Oue2] The delicate weighing load cell has
been damaged by misusing the scale
(i.e. it was shocked, dropped or
overloaded). You can try recalibrating the
scale. If the load cell has not been
damaged too much it will work
again after recalibration.
Model DigiPen-500
Capacity 500g
17.64oz
16.08ozt
321.5dwt
Resolution
0.1g / 0.005oz / 0.005ozt / 0.1dwt
Calibration Weight
(Included) 500g
Scale Dimensions
(inches) 1.0 x 1.2 x 6.2 “
Power 2 x AG8 Button Cell Batteries (included)
Specications
Inhaltsverzeichnis
Andere AWS Skala Handbücher
AWS
AWS KG-10 Bedienungsanleitung
AWS
AWS ONYX-5K Bedienungsanleitung
AWS
AWS CP3-100 Bedienungsanleitung
AWS
AWS 396LUMA Bedienungsanleitung
AWS
AWS PEPPER-5K Bedienungsanleitung
AWS
AWS AMW-150DR Bedienungsanleitung
AWS
AWS PV-650 Bedienungsanleitung
AWS
AWS MSL-180 Bedienungsanleitung
AWS
AWS CP2-300 Bedienungsanleitung
AWS
AWS AMW-500i Bedienungsanleitung
AWS
AWS SR-1KG Bedienungsanleitung
AWS
AWS AERO-100 Bedienungsanleitung
AWS
AWS MERCURY MRC-200 Bedienungsanleitung
AWS
AWS LB-SERIES Bedienungsanleitung
AWS
AWS SC-501 Bedienungsanleitung
AWS
AWS MDI-20 Bedienungsanleitung
AWS
AWS PC Series Bedienungsanleitung
AWS
AWS GO-110 Bedienungsanleitung
AWS
AWS ME-5KG Bedienungsanleitung
AWS
AWS Blade-v2-50 Bedienungsanleitung
