AWS CG-Series Bedienungsanleitung
American Weigh Scales, Inc.
CG-50 (50x0.01g)
CG-500 (500x0.1g) User Manual
CG-Series
Digital Pocket Scale
ON/OFF
PCS TARE
MODE
CG-Series Manual
Thank you for purchasing the American Weigh
CG-Series digital scale. Please read all operating
instructions carefully before use. This electronic scale
is a precision instrument. With normal care and proper
treatment, it will provide years of reliable service.
Never load the scale with more than the maximum
capacity. Overloading will permanently damage it!
Avoid any exposure to extreme heat or cold. Your
scale works better when operated at normal room
temperature. Always allow the scale to acclimate to
normal room temperature for at least one hour before
use.
Give your scale sufcient warm up time. Usually
30-60 seconds before calibration to give the internal
components a chance to stabilize.
Keep your scale in a clean environment. Dust, dirt,
moisture, vibration, air currents and a close distance to
other electronic equipment can all cause an adverse
effect on the reliability and accuracy of your scale.
Handle with care. Gently apply all items to be weighed
onto tray top. Although this scale is designed to be
quite durable, try to avoid rough treatment as this may
permanently damage the internal sensor.
Avoid shaking, dropping or otherwise shocking the
scale. This is a precision instrument and must be
handled with extreme care.
Only operate the scale on a stable, vibration free
surface.
I. OPERATION
Place Scale on a horizontal at surface.
1. Press [ ON/OFF ] key to turn the scale on.
2. Wait until "0.0” or "0.00" is displayed.
3. Place the object(s) onto the weighing platform.
4. By pressing the [
MODE
] key, you can switch
between weighing units..
II. TARE WEIGHING
1. Turn on scale as described above.
2. Place a tray or container on the scale platform.
3. Press [ TARE
] and wait until "0.0" or "0.00" is
displayed.
4. You can now add items to the container or tray to
obtain just the weight of the contents.
III. COUNTING FEATURE
1. Turn on the scale and wait until the LCD displays
"0.0" or "0.00".
2. Place a sample quantity (25pcs, 50pcs, 75pcs,
or 100pcs) of the items you want to count onto the
platform.
3. Press and HOLD the [ PCS ] key for 2 seconds;
the LCD will display the sample quantity setting, for
example “100”.
4. Press the [ MODE ] key to select the sample
amount of the item which you placed onto the platform.
5. Press the [ PCS ] key to conrm the above
information, the LCD will now display “pcs” in the
corner to show that the scale is in counting mode.
6. Remove the sample quantity from the platform.
7. You now can place any amount of your item(s) on
the scale and the LCD will display a count.
8. You can switch between weighing mode and
counting mode by pressing [ MODE ] or [ PCS ] key
respectively.
IV. CALIBRATION
Calibration is NOT required before rst use. Only
calibrate if the scale is not weighing properly.
The CG-500 calibrates with a 500g weight*
The CG-50 calibrates with a 50g weight*
*Weights not included.
1. Turn on the scale by pressing the [ ON/OFF ] key.
2. Wait until the LCD displays “0.0” or "0.00", then
press and HOLD the [ MODE ] key for 3 seconds. The
LCD will display “CAL”. You may now release the
[ MODE ] key.
3. Press the [ MODE ] key again. The LCD will display
“CAL” followed by the required calibration weight (see
above).
4. Place the required calibration weight on the center
of the platform. The display will show “PASS” and
return to normal weighing mode.
5. Put away the calibration weight and press
[ ON/OFF ] to turn off the scale and the calibration is
nished!
V. TROUBLESHOOTING
The primary reasons for inaccuracy or malfunction
are low batteries, incorrect calibration, overload or
operating on an unstable surface. Please keep this in
mind and maintain and operate your scale properly.
This scale is a precise instrument and must be
handled with the utmost care and caution.
[Display] Elimination of errors
-----------------------------------------------
[OUT2] Recalibrate the scale (Section III).
[EEEE] You are overloading the scale. Remove the
excessive load immediately!
[un2T] Use the scale in a more stable position
Model CG-50 CG-500
Capacity 50.00g
1.764oz
250ct
771.5gn
500.0g
17.64oz
16.08ozt
321.5dwt
Resolution 0.01g
0.001oz
0.05ct
0.1gn
0.1g
0.01oz
0.01ozt
0.1dwt
Weighing Units g, oz, ct, gn g, oz, ozt, dwt
Calibration Weight (not Included) 50g 500g
Platform Dimensions (inches) 2.0 x 2.7 “ Stainless Steel
Scale Dimensions (inches) 2.2 x 3.5 x 0.9”
Power 2 x CR2032 Batteries (included)
Warranty 10 Year Warranty
Specications
Inhaltsverzeichnis
Andere AWS Skala Handbücher
AWS
AWS MC series Bedienungsanleitung
AWS
AWS SC-501 Bedienungsanleitung
AWS
AWS ACPro-200 Bedienungsanleitung
AWS
AWS QS-500 Bedienungsanleitung
AWS
AWS SM-200 Bedienungsanleitung
AWS
AWS AMW-50 Bedienungsanleitung
AWS
AWS DK-5K Bedienungsanleitung
AWS
AWS PS-25 Bedienungsanleitung
AWS
AWS MSL-180 Bedienungsanleitung
AWS
AWS 396LUMA Bedienungsanleitung
AWS
AWS SR-1 Bedienungsanleitung
AWS
AWS CUBE-100 Bedienungsanleitung
AWS
AWS LB-1000 Bedienungsanleitung
AWS
AWS Chrome Bedienungsanleitung
AWS
AWS 330LPW Bedienungsanleitung
AWS
AWS AMW-500i Bedienungsanleitung
AWS
AWS 330ECO Bedienungsanleitung
AWS
AWS ACP-200 Bedienungsanleitung
AWS
AWS AMW-440T Bedienungsanleitung
AWS
AWS LB-SERIES Bedienungsanleitung
