BAFANG DPC-10 Biktrix Bedienungsanleitung

Bafang DPC-10 Manual

Biktrix Version

CONTENORMAL INDICATION AREA

1 Battery level

2 Maintenance warning

3 Headlight indicator

4 Distance mode

5 Walk Assistance

6 Malfunction indication

7 Menu

8 Speed display

9 Speed model

10 Distance indication

11 Level indication

● Battery level: 10-segment battery

level indicator.

● Maintenance Warning: When there is

a need for maintenance the symbol

will be displayed (riding

distance or the number of battery

charge cycles exceed the set value,

function can be deactivated).

● Headlight indicator: only shows

when headlight or backlight are on.

● Distance mode: display of maximum

speed MAXS, average speed AVG, the

single-trip distance TRIP, the total

distance TOTAL, remaining distance

TO GO, power W, energy consumption

● Level indication: The chosen level 1–5

will be displayed; if there is no numeric

display, it means that there is no

assistance (by the motor). If the rider is

walking and pushing the e-bike,

will be displayed.

● Error display: When a fault is detected

the symbol will be displayed.

● Speed display: display of the speed,

km/h or mph.

●Speed mode: average speed (AVG

km/h), maximum speed (MAXS

km/h).

● Distance indication: display of the

distance depending on the setting.

BUTTON DEFINITION

Up button

Headlight button

Switch button

Down button

Mode button

NORMAL OPERATION

●ON/OFF Switch ●Assist Mode Selection

Turn on the display, press and hold .

Press and hold again to power off

the display, If the bike is not used for 5

minutes (this time can be set) the

display will automatically turn off.

Press or choose the desired level of

assistance from the motor. The lowest

level is Level 1, the highest Level 5. When

the display is powered on, the default

mode is Level 1. When there is no number

displayed, there is no power assistance.

(power assistance level selection

interface as image below)

●Switch between Distance and

Speed Mode

Briefly press the button to switch

between distance and speed readings.

Single-trip distance (TRIP km), total

distance (TOTAL km), maximum speed

(MAXS), average riding speed (AVG

km/h), remaining distance (RANGE) and

energy consumption (C) are displayed in

successive order. (Mode interface

switches as below)

●Headlight/ Display Backlight

Operation

Hold the button. The backlight of

the display as well as the headlight and

tail-light will turn on. Hold the again

to power off these lights. There are 5

levels of backlight brightness that can

be selected by the user. If the display is

turned on in a dark environment, the

lights will be turned on automatically. If

the lights are turned off manually, they

also need to be turned on manually

afterwards.

●Walk Assistance

Hold the button. The e-bike will

enter walk assistance mode, and the

WALK symbol is displayed. Once the

button is released, the e-bike will

exit the walk assistance mode.

●Battery Status Indication

When the battery status is normal, a certain number of the battery LCD segments as well as

the border will light up according to the level of charge. If all 10 segments go blank and the

border starts blinking, the battery needs to be charged immediately.

●Battery status key

Number of

Percentage

Number of

Percentage

Number of

Charge in

Segments

Range

Segments

Range

Segments

Percentage

100% to 90%

50% to 60%

15% to 25%

80% to 90%

45% to 50%

5% to 15%

70% to 80%

35% to 45%

Border

0% to 5%

blinking

60% to 70%

25% to 35%

●When the display turns off, connect a USB

cable to the port on the display then the

display will turn on and charge. If the

display is turned on, only connect the USB

cable to the port to the display and display

begin charge. Maximum charge voltage is

5V, maximum charge current is 500mA

PARAMETER SETTING

●Items to be Set

1 〉Data reset

2 〉Km/mile

3 〉Light sensitivity

4 〉Display backlight brightness

5 〉Automatic off time

6 〉Maintenance warning settings

7 〉Check wheel diameter

8 〉Speed Limit Setting

9 〉Speed model

10 〉Battery information

●Setting Preparation

1) When the display is active, press

the button twice. The system will

enter the MENU parameter setting

state, in which the display parameters

can be set. Press twice again to

return to the main menu.

2) If no operation is performed for 10

seconds, the display will return to the

normal view.

3) In the parameter setting state, when

the parameter you want to set begins to

flash, press the / buttons to adjust

the parameter value. Press the

button to switch between the

parameters to be set. Press twice

to exit the submenu.

●Data reset

Press twice and the display will

enter the MENU state. In the speed

field tC will be displayed. If you press

a "y" will be also displayed. Now all

temporary data, e.g. maximum speed

(MAXS), average speed (AVG) and

single trip distance (TRIP) can be

cleared. Press the button to enter

the km/mile setting interface.

If the user does not reset the data, the

single trip distance and the accumulated

total riding time will be automatically

cleared when the accumulated total

riding time exceeds 99 hours and 59

minutes.

* The data will not be cleared when the

display’s light-sensing function is set to

0 or when it is switched off!

●Km/mile

When the speed field displays S7, press

the / buttons to switch between

km/h and mph as well as setting km or

miles. After changing this setting, press

the button to enter the option for

light sensitivity. The default display unit

is km.

●Light Sensitivity

When the speed field displays bL0, press

the / buttons to choose a value

between 0 and 5. The higher the chosen

value, the higher the light sensitivity.

After changing this setting, press the

button to enter the option for

backlight brightness.

●Display Backlight Brightness

When the speed field displays bL1, press

the / buttons to choose a value

between 1 and 5. A value of 1 represents

the lowest brightness while 5 indicates

the highest display back-light brightness.

After changing this setting, press the

button to enter the option for

automatic off time.

●Automatic Off Time

When the speed field displays OFF,

press the / buttons to choose a

value between 1 and 9. The chosen

value indicate the minutes that it takes to

automatically shut down the display.

After changing this setting, press the

button to enter the option for

maintenance warning.

●Maintenance Warning (can be

deactivated)

When the speed field displays nnA, press the

/ buttons to select 0 or 1. 0 disables this

function while 1 enables it.

1)The display will prompt maintenance

necessity based on information such as

accumulated riding distance and battery

charge cycles.

2)When the accumulated total riding

distance exceeds 5,000 km (can be

customized by the manufacturer), the

display will show the symbol .

When the display is powered on, the

icon will flash for 4 seconds,

indicating that maintenance is

necessary.

3)When the number of battery charge

cycles exceeds 100 the display will the

symbol . When the display is

started up, the sign for battery will flash

for 4 seconds, indicating that

maintenance is necessary.

After changing this setting press the button

to enter the option for wheel diameter.

● Display Password

Password to enter the next settings is 0512

●Wheel Diameter check

2) Information in the battery menu:

Speed position displays

Wd, measurement is in

inches. A wrong wheel

diameter can lead to

speed abnormalities.

After changing this

setting, press the

button to

enter the option for speed limit.

●Speed Limit Setting

When the speed field

displays SPL, the

distance field displays the

of the speed limit value.

Minimum speed limit is

12km/h, maximum speed

limit is 60km/h.

After changing this setting, press the

button to enter the battery

communications menu.

●Battery Communication

The speed field displays

b01 and the distance field

displays the speed limit.

Press the button

to cycle backward. After

viewing this setting, press

the button to enter

the menu for error codes in memory.

1) Only when communication has been

established between the battery and

the controller the following information

will be displayed, otherwise the display

will only shoe “- - - -“.

The

speed

field

displays

Definition

Unit

b01

Current

Temperature

°C

b04

Total Voltage

b06

Average Current

b07

Remaining

Capacity

b08

Full Capacity

b09

Relative state of

charge

b10

Absolute state of

charge

b11

Charge/discharge

cycle

b12

Longest Period

without a charge

b13

Period since last

charge

d00

Cell quantity

d01

Voltage of cell 1

d02

Voltage of cell 2

…..

Voltage of cell n

field

ERROR CODE DEFINITION

The DP C10.UART display can show

e-bike faults. When a fault is

detected, the icon will be

displayed. In the speed field one

of the following error codes will be

displayed. If you cannot

troubleshoot the error and resolve

the issue contact Biktrix support.

warning interface

Error Code

Error Definition

Trouble-shooting Method

“04”

Throttle has not returned to

neutral position

Check if throttle has returned to neutral position,

unplug throttle and plug back in

“05”

Throttle Fault

Check the throttle

“07”

Overvoltage Protection

Check the battery voltage

“08”

Motor hall signal cable fault

Check the motor module

“09”

Motor phase cable fault

Check the motor module

“11”

Controller temperature sensor

failure

Check the controller

“12”

Current sensor failure

Check the controller

“13”

Battery temperature fault

Check the battery

“14”

Motor temperature fault

Check the motor

“21”

Speed sensor fault

Check installation position of speed sensor

“22”

BMS communication fault

Replace the BMS or battery

“30”

Communication fault

Check the controller connection

Inhaltsverzeichnis

Andere BAFANG Fahrradzubehör Handbücher

BAFANG

BAFANG CR A101.C 1.0 Bedienungsanleitung

BAFANG

BAFANG DP E161.CAN Bedienungsanleitung

BAFANG

BAFANG DP C18.CAN Bedienungsanleitung

BAFANG

BAFANG DP C10.UART Bedienungsanleitung

BAFANG

BAFANG DP E08.CAN Bedienungsanleitung

BAFANG

BAFANG DP E161.CAN Bedienungsanleitung

BAFANG

BAFANG UB40 Bedienungsanleitung

BAFANG

BAFANG BT C01.340.UART Bedienungsanleitung

BAFANG

BAFANG DP C18.UART Bedienungsanleitung

BAFANG

BAFANG DP C231.CAN Bedienungsanleitung

BAFANG

BAFANG M800 Bedienungsanleitung

BAFANG

BAFANG C961 Bedienungsanleitung

BAFANG

BAFANG DP C07.UART Bedienungsanleitung

BAFANG

BAFANG UB600 Bedienungsanleitung

BAFANG

BAFANG H550 Bedienungsanleitung

BAFANG

BAFANG C965 Bedienungsanleitung

BAFANG

BAFANG H600 Bedienungsanleitung

BAFANG

BAFANG DP C240.CAN Bedienungsanleitung

BAFANG

BAFANG BT C01.340.UART Referenzhandbuch

BAFANG

BAFANG DP C181.CAN Bedienungsanleitung

BAFANG

BAFANG DP C10.UART Bedienungsanleitung

BAFANG

BAFANG DP E171.CAN Bedienungsanleitung

BAFANG

BAFANG MM G333.250.C Bedienungsanleitung

BAFANG

BAFANG DP C15.UART Bedienungsanleitung

Beliebte Fahrradzubehör Handbücher anderer Marken

Sigma

Sigma BC 16.16 Bedienungsanleitung

Playcore

Playcore Dero Setbacks Bedienungsanleitung

VDO Cyclecomputing

VDO Cyclecomputing x3dw Bedienungsanleitung

Cateye

Cateye RAPID X2 Bedienungsanleitung

buratti meccanica

buratti meccanica Clorofilla Trail Bedienungsanleitung

Shimano

Shimano SG-8R20 Betriebsanleitung

BOB

BOB YAK Bedienungsanleitung

APLIC

APLIC 303303/20190717TW012 Bedienungsanleitung

SRAM

SRAM AXS BlipBox Bedienungsanleitung

Garmin

Garmin EDGE 500 Bedienungsanleitung

Shimano

Shimano FD-RX810 Bedienungsanleitung

Cateye

Cateye V2C - Gebrauchsanweisung

KMART

KMART 43115907 Bedienungsanleitung

SIGMA SPORT

SIGMA SPORT Buster 2000 Bedienungsanleitung

NVO Components

NVO Components STEM Bedienungsanleitung

DAXYS

DAXYS BP188 Bedienungsanleitung

XLC

XLC BV-W17 Bedienungsanleitung

Deda Elementi

Deda Elementi SUPERBOX Bedienungsanleitung